--------------------------------- extension 0 ---------------------------------
SIMPLE  =                    T / file does conform to FITS standard
BITPIX  =                   16
NAXIS   =                    0
EXTEND  =                    T / FITS dataset may contain extensions
COMMENT   FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT   and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
NEXTEND =                 3136 / Number of standard extensions
FILENAME= 'ibh719011_spt.fits' / name of file
FILETYPE= 'SPT      '          / type of data found in data file
  
TELESCOP= 'HST'                / telescope used to acquire data
INSTRUME= 'WFC3  '             / identifier for instrument used to acquire data
EQUINOX =               2000.0 / equinox of celestial coord. system
  
              / DATA DESCRIPTOR KEYWORDS
  
ROOTNAME= 'IBH719011 '         / rootname of the observation set
DEFAULTS=                    F / default values used in reformatting these data
PROC_TYP= 'NORMAL      '       / type of pipeline processing
  
              / TARGET INFORMATION
  
TARGNAME= 'COROT-1                       ' / proposer's target name
RA_TARG =   1.020798511685E+02 / right ascension of the target (deg) (J2000)
DEC_TARG=  -3.102201479542E+00 / declination of the target (deg) (J2000)
ECL_LONG=           103.441817 / ecliptic longitude of the target (deg) (J2000)
ECL_LAT =           -25.979573 / ecliptic latitude of the target (deg) (J2000)
GAL_LONG=           215.338858 / galactic longitude of the target (deg) (J2000)
GAL_LAT =            -2.107168 / galactic latitude of the target (deg) (J2000)
  
              / OTHER COORDINATE SYSTEM INFORMATION
  
APER_REF= 'IIR128G141'         / aperture used for reference position
ELON_REF=           103.441817 / ecliptic longitude at reference position (deg)
ELAT_REF=           -25.979573 / ecliptic latitude at reference position (deg)
GLON_REF=           215.338858 / galactic longitude at reference position (deg)
GLAT_REF=            -2.107168 / galactic latitude at reference position (deg)
  
              / PROPOSAL INFORMATION
  
PROPOSID=                12181 / PEP proposal identifier
LINENUM = '19.002         '    / proposal logsheet line number
  
              / SOFTWARE VERSION KEYWORDS
  
FLTSWVER= '5.0     '           / flight software version number
OPUS_VER= 'OPUS 2013_3       ' / OPUS software system version number
  
              / TIME CONVERSION KEYWORDS
  
CLKDRFTR=   4.951522262103E-19 / spacecraft clock drift rate
CLKRATE =   1.250000027472E-01 / spacecraft clock rate
SPCLINCN=   5.674529090000E+08 / spacecraft clock at UTC0
UTC0    =   5.504072222139E+04 / Coordinated Universal Time (Mod Julian Date)
  
              / SUPPORT SCHEDULE: PROGRAMMATIC DATA
PROGRMID= 'BH7'                / program id (base 36)
PR_INV_L= 'Deming                        ' / last name of principal investigator
PR_INV_F= 'Drake               ' / first name of principal investigator
PR_INV_M= '                    ' / middle name / initial of principal investigat
ACCPDATE= '       '            / proposal acceptance date (yyyyddd)
OBSET_ID= '19'                 / observation set id
CALIBRAT= 'T'                  / calibrate data flag
OBSERVTN= '011     '           / observation number (base 36)
EXPACKET=                    4 / expected number of source packets
PRODTYPE= '                  ' / output product medium type
OPFORMAT= '                  ' / output product format specification
CALIBTYP= ' '                  / calibration type : E, I or Blank
CDBSDATA= 'FALSE'              / cdbs notification flag: 'CAL' or 'FALSE'
  
  
              / SUPPORT SCHEDULE: FLAGS AND INDICATORS
  
SS_OBSMD= 'MULTIACCUM     '    / Support schedule specified operating mode
SS_APER = 'GRISM128        '   / proposed aperture name
SS_DTCTR= 'WFC3/IR   '         / proposed detector to use
SS_FILT = 'G141                ' / proposed filter in use
SS_NSAMP=                   15 / proposed number of nondestructive readouts
SS_CBNA1=                    0 / prop. num. of CCD pixels binned on-chip - axis1
SS_CBNA2=                    0 / prop. num. of CCD pixels binned on-chip - axis2
SS_SUBAR= 'SQ128   '           / proposed subarray data format (YES, NO, BINNED)
SS_A1CRN=                    0 / proposed axis1 detector pixel of subarray start
SS_A1SZE=             0.000000 / prop. subarray axis1 size in unbinned detr pix
SS_A2CRN=                    0 / proposed axis2 detector pixel of subarray start
SS_A2SZE=             0.000000 / prop. subarray axis2 size in unbinned detr pix
SS_GAIN =                    0 / proposed CCD amplifier gain setting
SS_SPLIT=                    1 / proposed number of cosmic ray split exposures
SS_RPT  =                   98 / proposed number of repeat exposures in set
  
              / IR FPA OVERHEAD TIMES
  
DET_WARM=             0.000000 / time to warm up the readout electronics (sec.)
ACC_RDLY=             0.000000 / time delay between readout end and next start
  
              / SUPPORT SCHEDULE: DATA GROUP II DATA
WRD11_14=                   26 / word 11/14 (0-255)
PSTRTIME= '2012.017:02:54:00 ' / predicted obs. start time (yyyy.ddd:hh:mm:ss)
PSTPTIME= '2012.017:02:56:20 ' / predicted obs. stop time (yyyy.ddd:hh:mm:ss)
APEROBJ = 'IIR128G141'         / si object aperture id
APERSKY = '          '         / si sky aperture id
TARG_ID = '12181_14       '    / SPSS target ID from proposal+target no.
APERTYPE= 'SICS              ' / aperture type (SICS, SIAS, SIDS)
RA_V1   =   1.020812281290E+02 / right ascension of v1 axis of st (deg)
DEC_V1  =  -3.106147792442E+00 / declination of v1 axis of st (deg)
PA_V3   =           212.661407 / position angle of V3-axis of HST (deg)
APEROFFX=             0.000000 / x comp of object offset in aperture (arcsec)
APEROFFY=             0.000000 / y comp of object offset in aperture (arcsec)
ANGLESEP=             0.000000 / ang separation of target from ref obj (arcsec)
DGESTAR = 'S39Y000243F1'       / FGS ID(F1,F2,F3) concat. w/ dom. gd. star id
SGESTAR = 'S39Y000066F2'       / FGS ID(F1,F2,F3) concat. w/ subdom. gd. star id
PA_APER =             -102.511 / position ang of aperture used with target (deg)
PA_REF  =             0.000000 / position ang of target from ref. object (deg)
SAAAVOID= '30'                 / SAA model for SAA Avoidance (range 02-99)
TARAQMOD= '03'                 / target acquisition mode (values 00, 01, 02, 03)
POSTNSTX=   5.879870295651E+03 / position of space telescope x axis (km)
POSTNSTY=   3.211526393108E+03 / position of space telescope y axis (km)
POSTNSTZ=  -1.796673935756E+03 / position of space telescope z axis (km)
VELOCSTX=  -2.591962857382E+00 / vel of space telescope along x axis (km/sec)
VELOCSTY=   6.446362108207E+00 / vel of space telescope along y axis (km/sec)
VELOCSTZ=   3.040205178951E+00 / vel of space telescope along z axis (km/sec)
RA_SUN  =   2.982134679830E+02 / right ascension of the sun (deg)
DEC_SUN =  -2.090766437598E+01 / declination of the sun (deg)
RA_MOON =   2.125612871030E+02 / right ascension of the moon (deg)
DEC_MOON=  -1.646907934452E+01 / declination of the moon (deg)
VELABBRA=            20.933760 / aberration in position of the target
ANNPARRA=             0.000000 / par. shift in position, non-solar sys target
V2APERCE=             0.000000 / V2 offset of target from aper fiducial (arcsec)
V3APERCE=             0.000000 / V3 offset of target from aper fiducial (arcsec)
EQRADTRG=             0.000000 / equatorial radius of target (km)
FLATNTRG=             0.000000 / flattening of target
NPDECTRG=             0.000000 / north pole declination of target (deg)
NPRATRG =             0.000000 / north pole right ascension of target (deg)
ROTRTTRG=             0.000000 / rotation rate of target
LONGPMER=             0.000000 / longitude of prime meridian (deg)
EPLONGPM=             0.000000 / epoch of longitude of prime meridian (sec)
SURFLATD=             0.000000 / surface feature latitude (deg)
SURFLONG=             0.000000 / surface feature longitude (deg)
SURFALTD=             0.000000 / surface feature altitude (km)
MTFLAG  = ' '                  / moving target flag; T if it is a moving target
S0INVMAG=   0.000000000000E+00 / S0 inverse magnitude
S0XDIR  =   0.000000000000E+00 / S0 X direction
S0YDIR  =   0.000000000000E+00 / S0 Y direction
S0ZDIR  =   0.000000000000E+00 / S0 Z direction
TRK_TYPE= 'F  '                / track 48 or track 51 commanding used
T51_RATE=                  0.0 / rate of motion commanded (arcsecs/sec)
T51_ANGL=                  0.0 / position angle of motion of aperture (deg)
TARGDIST=   0.000000000000E+00 / distance to target from Earth's center (km)
PAR_CORR= 'N'                  / parallax correction used (Y, N, or A)
RA_REF  =   1.020798511685E+02 / right ascension of reference object (deg)
DEC_REF =  -3.102201479542E+00 / declination of reference object (deg)
  
              / ONBOARD EPHEMERIS MODEL PARAMETERS
EPCHTIME=   8.527680000000E+08 / epoch time of parameters (secs since 1/1/85)
SDMEANAN=   4.674622659969E-15 / 2nd deriv coef for mean anomaly (revs/sec/sec)
SDMA3SQ =   3.590991087846E-06 / 3 * (SDMEANAN**2) radians/second**2.
HSTHORB =   2.871463739335E+03 / half the duration of the ST orbit (seconds)
CIRVELOC=   7.589098820681E+03 / circular orbit linear velocity (meters/second)
COSINCLI=   8.786581045801E-01 / cosine of inclination
ECCENTRY=   5.098440700995E-04 / eccentricity
ECCENTX2=   1.019688140199E-03 / eccentricity times 2
ECBDX4D3=   1.767058201273E-10 / eccentricity cubed times 4/3
ESQDX5D2=   6.498524395390E-07 / eccentricity squared times 5/2
ECBDX3  =   3.975880952864E-10 / eccentricity cubed times 3
FDMEANAN=   1.741272206055E-04 / 1st derivative coef for mean anomly (revs/sec)
RCASCNRD=  -1.317789951709E-06 / rt chge right ascension ascend node (rads/sec)
RCASCNRV=  -2.097327847713E-07 / rt chge right ascension ascend node (revs/sec)
ARGPERIG=   3.388639510783E-01 / argument of perigee (revolutions)
MEANANOM=   2.504138385048E+00 / mean anomaly (radians)
RCARGPER=   6.654776152616E-08 / rate change of argument of perigee (revs/sec)
RASCASCN=   2.909768229310E-01 / right ascension of ascending node (revolutions)
SINEINCL=   4.774515004224E-01 / sine of inclination
SEMILREC=   6.936516712409E+06 / semi-latus rectum (meters)
TIMEFFEC=   8.528169610000E+08 / time parameters took effect (secs since 1/1/85)
OBSSTRTT=   8.533832400000E+08 / predicted obs. start time (secs since 1/1/85)
  
              / PROPOSAL INFO: Instrument Configuration
CONFIG  = 'WFC3/IR        '    / proposed instrument configuration
OPMODE  = 'MULTIACCUM        ' / proposed operation mode
SPEC_1  = 'G141                ' / spectral element
SPEC_2  = '                    ' / spectral element
SPEC_3  = '                    ' / spectral element
SPEC_4  = '                    ' / spectral element
APER_1  = 'GRISM128       '    / instrument aperture
APER_2  = '               '    / instrument aperture
APER_3  = '               '    / instrument aperture
APER_4  = '               '    / instrument aperture
  
              / PROPOSAL INFO: Target Description
TAR_TYPE= 'POINT TARGET   '    / target type
TARDESCR= 'STAR;G V-IV                                                         '
TARGCAT = 'STAR                    ' / first target category
TARKEY1 = 'G V-IV                                                              '
  
              / PROPOSAL INFO: Flux Information
MAG_V   =            13.600000 / expected V Magnitude
SURF_V  =             0.000000 / expected V surface brightness
MAG_B   =             0.000000 / expected B Magnitude
SURF_B  =             0.000000 / expected B surface brightness
MAG_U   =             0.000000 / expected U Magnitude
SURF_U  =             0.000000 / expected U surface brightness
MAG_R   =             0.000000 / expected R Magnitude
SURF_R  =             0.000000 / expected R surface brightness
COL_B_V =             0.000000 / expected B-V color
COL_U_B =             0.000000 / expected U-B color
COL_V_R =             0.000000 / expected V-R color
E_B_V   =             0.000000 / E(B-V)
EXTNCT_V=             0.000000 / extinction in V
  
              / PROPOSAL INFO: Exposure Information
CMD_EXP =           100.768997 / commanded time per exposure (from TRANS)
  
              / PROPOSAL INFO: Moving Target Information
  
              / PROPOSAL INFO: Target Properties
REDSHIFT=   0.000000000000E+00 / target redshift from proposal
PARALLAX=   0.000000000000E+00 / target parallax from proposal
RA_PROP =   1.020798833333E+02 / target right ascension from proposal (degrees)
DEC_PROP=  -3.102222222222E+00 / target declination from proposal (degrees)
PEQUINOX= 'J2000  '            / equinox of coordinate system from proposal
MU_RA   =  -9.600000000000E-03 / target proper motion from proposal (degrees RA)
MU_DEC  =   6.200000000000E-03 / target proper motion from proposal (deg. DEC)
MU_EPOCH= 'J2000.0'            / epoch of proper motion from proposal
SP_TYPE = '               '    / target spectral type from proposal
RAD_VEL =   0.000000000000E+00 / target radial velocity from proposal (km/sec)
  
              / PROPOSAL INFO: Spatial Scan Info
SCAN_TYP= 'N                 ' / C:bostrophidon; D:C with dwell; N:N/A
SCAN_WID=   0.000000000000E+00 / scan width (arcsec)
ANG_SIDE=   0.000000000000E+00 / angle between sides of parallelogram (deg)
DWELL_LN=                    0 / dwell pts/line for scan pointing (1-99,0 if NA)
DWELL_TM=   0.000000000000E+00 / wait time (duration) at each dwell point (sec)
SCAN_ANG=   0.000000000000E+00 / position angle of scan line (deg)
SCAN_RAT=   0.000000000000E+00 / commanded rate of the line scan (arcsec/sec)
NO_LINES=                    0 / number of lines per scan (1-99,0 if NA)
SCAN_LEN=   0.000000000000E+00 / scan length (arcsec)
SCAN_COR= 'C                 ' / scan coordinate frame of ref: celestial,vehicle
  
              / PROPOSAL INFO: Auxiliary
PARENTID=                    0 / PEP proposal identifier of the parent proposal
PROPTTL1= 'The Atmospheric Structure of Giant Hot Exoplanets                   '
PROP_TYP= 'GO                  ' / proposal type
  
  
              / APERTURE PARAMETERS
  
HOSV2CNT=   1.183410000000E+01 / V2 coordinate of aperture fiducial (arcsec)
HOSV3CNT=  -9.289000000000E+00 / V3 coordinate of aperture fiducial (arcsec)
HOSISHA = 'Q'                  / Aperture shape ;Pickle, Circle, Quad, Rectangle
HOSIVDM =   0.000000000000E+00 / Half-length of aperture major axis (arcsec)
HOSAPOR =   4.482780000000E+01 / Rotation angle to orient SICS and V2/V3 (deg)
HOSIMPAR=                   -1 / Parity of SICS to V2/V3 (-1=left, +1=right)
HOSIASX =   4.100000000000E+02 / x coord. of aperture fiducial in SIAS (pixels)
HOSIASY =   5.220000000000E+02 / y coord. of aperture fiducial in SIAS (pixels)
HOSD1   =   1.354740000000E-01 / 1st coordinate axis increment (arcsec)
HOSD2   =   1.210190000000E-01 / 2nd coordinate axis increment (arcsec)
HOSTH1  =  -4.523180000000E+01 / Angle from V3 to line of incr 1st axis (degrees
HOSTH2  =   4.482780000000E+01 / Angle from V3 to line of incr 2nd axis (degrees
  
              / SIAS to SICS CONVERSION
  
HOSPOLY =                    4 / Polynomial degree for SIAS to SICS conversion
AS2CSX00=   0.000000000000E+00 / 0 order, 0 coefficient for x-coord SIAS to SICS
AS2CSX10=   0.000000000000E+00 / 1 order, 0 coefficient for x-coord SIAS to SICS
AS2CSX11=   1.354740000000E-01 / 1 order, 1 coefficient for x-coord SIAS to SICS
AS2CSX20=   1.904300000000E-08 / 2 order, 0 coefficient for x-coord SIAS to SICS
AS2CSX21=   3.317600000000E-06 / 2 order, 1 coefficient for x-coord SIAS to SICS
AS2CSX22=  -1.982300000000E-08 / 2 order, 2 coefficient for x-coord SIAS to SICS
AS2CSX30=  -6.115100000000E-12 / 3 order, 0 coefficient for x-coord SIAS to SICS
AS2CSX31=   1.214500000000E-11 / 3 order, 1 coefficient for x-coord SIAS to SICS
AS2CSX32=  -1.468700000000E-11 / 3 order, 2 coefficient for x-coord SIAS to SICS
AS2CSX33=   5.307000000000E-12 / 3 order, 3 coefficient for x-coord SIAS to SICS
AS2CSX40=  -4.364600000000E-14 / 4 order, 0 coefficient for x-coord SIAS to SICS
AS2CSX41=   8.960900000000E-14 / 4 order, 1 coefficient for x-coord SIAS to SICS
AS2CSX42=   5.169200000000E-15 / 4 order, 2 coefficient for x-coord SIAS to SICS
AS2CSX43=   9.619800000000E-14 / 4 order, 3 coefficient for x-coord SIAS to SICS
AS2CSX44=  -6.564000000000E-14 / 4 order, 4 coefficient for x-coord SIAS to SICS
AS2CSY00=   0.000000000000E+00 / 0 order, 0 coefficient for y-coord SIAS to SICS
AS2CSY10=   1.210190000000E-01 / 1 order, 0 coefficient for y-coord SIAS to SICS
AS2CSY11=  -1.410000000000E-04 / 1 order, 1 coefficient for y-coord SIAS to SICS
AS2CSY20=   3.638200000000E-06 / 2 order, 0 coefficient for y-coord SIAS to SICS
AS2CSY21=  -1.869900000000E-08 / 2 order, 1 coefficient for y-coord SIAS to SICS
AS2CSY22=   8.448500000000E-07 / 2 order, 2 coefficient for y-coord SIAS to SICS
AS2CSY30=  -1.343300000000E-11 / 3 order, 0 coefficient for y-coord SIAS to SICS
AS2CSY31=  -2.586300000000E-12 / 3 order, 1 coefficient for y-coord SIAS to SICS
AS2CSY32=  -3.727700000000E-11 / 3 order, 2 coefficient for y-coord SIAS to SICS
AS2CSY33=   3.093500000000E-11 / 3 order, 3 coefficient for y-coord SIAS to SICS
AS2CSY40=   9.452200000000E-14 / 4 order, 0 coefficient for y-coord SIAS to SICS
AS2CSY41=  -3.412300000000E-15 / 4 order, 1 coefficient for y-coord SIAS to SICS
AS2CSY42=   1.813500000000E-14 / 4 order, 2 coefficient for y-coord SIAS to SICS
AS2CSY43=   2.997300000000E-14 / 4 order, 3 coefficient for y-coord SIAS to SICS
AS2CSY44=  -6.947300000000E-14 / 4 order, 4 coefficient for y-coord SIAS to SICS
  
              / SICS to SIAS CONVERSION
  
CS2ASX00=   0.000000000000E+00 / 0 order, 0 coefficient for x-coord SICS to SIAS
CS2ASX10=  -6.000000000000E-06 / 1 order, 0 coefficient for x-coord SICS to SIAS
CS2ASX11=   7.381492000000E+00 / 1 order, 1 coefficient for x-coord SICS to SIAS
CS2ASX20=  -9.738100000000E-06 / 2 order, 0 coefficient for x-coord SICS to SIAS
CS2ASX21=   3.692200000000E-04 / 2 order, 1 coefficient for x-coord SICS to SIAS
CS2ASX22=   4.640100000000E-06 / 2 order, 2 coefficient for x-coord SICS to SIAS
CS2ASX30=  -1.319200000000E-08 / 3 order, 0 coefficient for x-coord SICS to SIAS
CS2ASX31=   6.344800000000E-07 / 3 order, 1 coefficient for x-coord SICS to SIAS
CS2ASX32=  -5.182100000000E-08 / 3 order, 2 coefficient for x-coord SICS to SIAS
CS2ASX33=   1.358600000000E-07 / 3 order, 3 coefficient for x-coord SICS to SIAS
CS2ASX40=   1.753200000000E-11 / 4 order, 0 coefficient for x-coord SICS to SIAS
CS2ASX41=  -3.768600000000E-10 / 4 order, 1 coefficient for x-coord SICS to SIAS
CS2ASX42=   5.099100000000E-11 / 4 order, 2 coefficient for x-coord SICS to SIAS
CS2ASX43=  -1.606400000000E-10 / 4 order, 3 coefficient for x-coord SICS to SIAS
CS2ASX44=   3.786800000000E-12 / 4 order, 4 coefficient for x-coord SICS to SIAS
CS2ASY00=   0.000000000000E+00 / 0 order, 0 coefficient for y-coord SICS to SIAS
CS2ASY10=   8.263179000000E+00 / 1 order, 0 coefficient for y-coord SICS to SIAS
CS2ASY11=   8.617000000000E-03 / 1 order, 1 coefficient for y-coord SICS to SIAS
CS2ASY20=  -2.052600000000E-03 / 2 order, 0 coefficient for y-coord SICS to SIAS
CS2ASY21=  -1.447000000000E-03 / 2 order, 1 coefficient for y-coord SICS to SIAS
CS2ASY22=  -3.823600000000E-04 / 2 order, 2 coefficient for y-coord SICS to SIAS
CS2ASY30=   1.104600000000E-06 / 3 order, 0 coefficient for y-coord SICS to SIAS
CS2ASY31=  -8.441000000000E-09 / 3 order, 1 coefficient for y-coord SICS to SIAS
CS2ASY32=   1.005200000000E-06 / 3 order, 2 coefficient for y-coord SICS to SIAS
CS2ASY33=  -8.119900000000E-09 / 3 order, 3 coefficient for y-coord SICS to SIAS
CS2ASY40=  -7.384500000000E-10 / 4 order, 0 coefficient for y-coord SICS to SIAS
CS2ASY41=   2.228700000000E-11 / 4 order, 1 coefficient for y-coord SICS to SIAS
CS2ASY42=  -2.010500000000E-10 / 4 order, 2 coefficient for y-coord SICS to SIAS
CS2ASY43=   1.819700000000E-11 / 4 order, 3 coefficient for y-coord SICS to SIAS
CS2ASY44=  -2.162200000000E-11 / 4 order, 4 coefficient for y-coord SICS to SIAS
  
              / V2/V3 APERTURE VERTICES
  
APVER1V2=   1.881800000000E+00 / V2 coordinate of aperture vertex 1 (arcsecs)
APVER1V3=  -4.039250000000E+01 / V3 coordinate of aperture vertex 1 (arcsecs)
APVER2V2=  -1.039110000000E+01 / V2 coordinate of aperture vertex 2 (arcsecs)
APVER2V3=  -1.537380000000E+02 / V3 coordinate of aperture vertex 2 (arcsecs)
APVER3V2=   4.726000000000E-01 / V2 coordinate of aperture vertex 3 (arcsecs)
APVER3V3=  -1.432208000000E+02 / V3 coordinate of aperture vertex 3 (arcsecs)
APVER4V2=   1.278430000000E+01 / V2 coordinate of aperture vertex 4 (arcsecs)
APVER4V3=  -2.951870000000E+01 / V3 coordinate of aperture vertex 4 (arcsecs)
  
              / ASSOCIATION KEYWORDS
  
ASN_ID  = 'IBH719010 '         / unique identifier assigned to association
ASN_TAB = 'ibh719010_asn.fits     ' / name of the association table
ASN_MTYP= 'prod-rpt'           / Role of the Member in the Association
END

--------------------------------- extension 1 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    1 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36159 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32253806 / Exposure Start Time: MIE coarse
MIFTIMES=            103211565 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32253807 / Exposure Complete: MIE coarse
MIFTIMEC=            103211566 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32253807 / Readout Start: MIE coarse
MIFREADS=            103211566 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32254031 / Readout Complete: MIE coarse
MIFREADC=            103212284 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 2 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    1 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   64 / Observation number
IHDRCNT =                   32 / Number of headers currently in EDAC RAM
IIMGCNT =                   32 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17996032 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  672 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.365 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.3122 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    3 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    3 / CS memory monitor #5
ICSMEM06=                    3 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    3 / CS memory monitor #9
ICSMEM10=                    3 / CS memory monitor #10
ICSMEM11=                    3 / CS memory monitor #11
ICSMEM12=                    3 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                    3 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 3 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    2 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36158 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32253582 / Exposure Start Time: MIE coarse
MIFTIMES=            103210847 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32253582 / Exposure Complete: MIE coarse
MIFTIMEC=            103210848 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32253582 / Readout Start: MIE coarse
MIFREADS=            103210848 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32253806 / Readout Complete: MIE coarse
MIFREADC=            103211565 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 4 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    2 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   63 / Observation number
IHDRCNT =                   31 / Number of headers currently in EDAC RAM
IIMGCNT =                   31 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17957944 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  651 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5129 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.365 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=               6.3122 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  109 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  109 / CS memory monitor #5
ICSMEM06=                  109 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  109 / CS memory monitor #9
ICSMEM10=                  109 / CS memory monitor #10
ICSMEM11=                  109 / CS memory monitor #11
ICSMEM12=                  109 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                  109 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 5 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    3 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36157 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32253358 / Exposure Start Time: MIE coarse
MIFTIMES=            103210129 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32253358 / Exposure Complete: MIE coarse
MIFTIMEC=            103210130 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32253358 / Readout Start: MIE coarse
MIFREADS=            103210130 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32253582 / Readout Complete: MIE coarse
MIFREADC=            103210847 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 6 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    3 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   62 / Observation number
IHDRCNT =                   30 / Number of headers currently in EDAC RAM
IIMGCNT =                   30 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17919856 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  630 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.30734 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.48483 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   94 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   94 / CS memory monitor #5
ICSMEM06=                   94 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   94 / CS memory monitor #9
ICSMEM10=                   94 / CS memory monitor #10
ICSMEM11=                   94 / CS memory monitor #11
ICSMEM12=                   94 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                   94 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 7 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    4 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36156 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32253133 / Exposure Start Time: MIE coarse
MIFTIMES=            103209411 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32253133 / Exposure Complete: MIE coarse
MIFTIMEC=            103209411 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32253133 / Readout Start: MIE coarse
MIFREADS=            103209412 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32253358 / Readout Complete: MIE coarse
MIFREADC=            103210129 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 8 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    4 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   61 / Observation number
IHDRCNT =                   29 / Number of headers currently in EDAC RAM
IIMGCNT =                   29 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17881768 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  609 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.29761 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.4751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 9 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    5 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36155 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32252909 / Exposure Start Time: MIE coarse
MIFTIMES=            103208693 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32252909 / Exposure Complete: MIE coarse
MIFTIMEC=            103208693 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32252909 / Readout Start: MIE coarse
MIFREADS=            103208693 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32253133 / Readout Complete: MIE coarse
MIFREADC=            103209411 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 10 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    5 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   60 / Observation number
IHDRCNT =                   28 / Number of headers currently in EDAC RAM
IIMGCNT =                   28 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17843680 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  588 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.48483 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 11 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    6 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36154 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32252684 / Exposure Start Time: MIE coarse
MIFTIMES=            103207975 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32252684 / Exposure Complete: MIE coarse
MIFTIMEC=            103207975 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32252684 / Readout Start: MIE coarse
MIFREADS=            103207975 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32252909 / Readout Complete: MIE coarse
MIFREADC=            103208693 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 12 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    6 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   59 / Observation number
IHDRCNT =                   27 / Number of headers currently in EDAC RAM
IIMGCNT =                   27 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17805592 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  567 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5129 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.29761 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.4751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   51 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   51 / CS memory monitor #5
ICSMEM06=                   51 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   51 / CS memory monitor #9
ICSMEM10=                   51 / CS memory monitor #10
ICSMEM11=                   51 / CS memory monitor #11
ICSMEM12=                   51 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                   51 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 13 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    7 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36153 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32252460 / Exposure Start Time: MIE coarse
MIFTIMES=            103207257 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32252460 / Exposure Complete: MIE coarse
MIFTIMEC=            103207257 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32252460 / Readout Start: MIE coarse
MIFREADS=            103207257 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32252684 / Readout Complete: MIE coarse
MIFREADC=            103207975 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 14 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    7 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   58 / Observation number
IHDRCNT =                   26 / Number of headers currently in EDAC RAM
IIMGCNT =                   26 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17767504 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  546 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5129 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.48483 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   37 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   37 / CS memory monitor #5
ICSMEM06=                   37 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   37 / CS memory monitor #9
ICSMEM10=                   37 / CS memory monitor #10
ICSMEM11=                   37 / CS memory monitor #11
ICSMEM12=                   37 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                   37 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 15 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    8 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36152 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32252235 / Exposure Start Time: MIE coarse
MIFTIMES=            103206539 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32252236 / Exposure Complete: MIE coarse
MIFTIMEC=            103206539 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32252236 / Readout Start: MIE coarse
MIFREADS=            103206539 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32252460 / Readout Complete: MIE coarse
MIFREADC=            103207257 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 16 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    8 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   57 / Observation number
IHDRCNT =                   25 / Number of headers currently in EDAC RAM
IIMGCNT =                   25 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17729416 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  525 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.45564 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   23 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   23 / CS memory monitor #5
ICSMEM06=                   23 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   23 / CS memory monitor #9
ICSMEM10=                   23 / CS memory monitor #10
ICSMEM11=                   23 / CS memory monitor #11
ICSMEM12=                   23 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                   23 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 17 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                    9 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36151 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32252011 / Exposure Start Time: MIE coarse
MIFTIMES=            103205820 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32252011 / Exposure Complete: MIE coarse
MIFTIMEC=            103205821 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32252011 / Readout Start: MIE coarse
MIFREADS=            103205821 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32252235 / Readout Complete: MIE coarse
MIFREADC=            103206538 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 18 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                    9 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   56 / Observation number
IHDRCNT =                   24 / Number of headers currently in EDAC RAM
IIMGCNT =                   24 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17691328 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  504 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.43618 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    8 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    8 / CS memory monitor #5
ICSMEM06=                    8 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    8 / CS memory monitor #9
ICSMEM10=                    8 / CS memory monitor #10
ICSMEM11=                    8 / CS memory monitor #11
ICSMEM12=                    8 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29380 / Major frame count
IMINFCNT=                    8 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 19 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   10 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36150 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32251787 / Exposure Start Time: MIE coarse
MIFTIMES=            103205102 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32251787 / Exposure Complete: MIE coarse
MIFTIMEC=            103205103 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32251787 / Readout Start: MIE coarse
MIFREADS=            103205103 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32252011 / Readout Complete: MIE coarse
MIFREADC=            103205820 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 20 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   10 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   55 / Observation number
IHDRCNT =                   23 / Number of headers currently in EDAC RAM
IIMGCNT =                   23 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17653240 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  483 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.23923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.43618 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  114 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  114 / CS memory monitor #5
ICSMEM06=                  114 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  114 / CS memory monitor #9
ICSMEM10=                  114 / CS memory monitor #10
ICSMEM11=                  114 / CS memory monitor #11
ICSMEM12=                  114 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                  114 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 21 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   11 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36149 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32251562 / Exposure Start Time: MIE coarse
MIFTIMES=            103204384 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32251562 / Exposure Complete: MIE coarse
MIFTIMEC=            103204385 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32251562 / Readout Start: MIE coarse
MIFREADS=            103204385 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32251787 / Readout Complete: MIE coarse
MIFREADC=            103205102 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 22 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   11 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   54 / Observation number
IHDRCNT =                   22 / Number of headers currently in EDAC RAM
IIMGCNT =                   22 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17615152 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  462 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.43618 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  100 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  100 / CS memory monitor #5
ICSMEM06=                  100 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  100 / CS memory monitor #9
ICSMEM10=                  100 / CS memory monitor #10
ICSMEM11=                  100 / CS memory monitor #11
ICSMEM12=                  100 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                  100 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 23 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   12 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36148 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32251338 / Exposure Start Time: MIE coarse
MIFTIMES=            103203666 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32251338 / Exposure Complete: MIE coarse
MIFTIMEC=            103203666 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32251338 / Readout Start: MIE coarse
MIFREADS=            103203666 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32251562 / Readout Complete: MIE coarse
MIFREADC=            103204384 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 24 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   12 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   53 / Observation number
IHDRCNT =                   21 / Number of headers currently in EDAC RAM
IIMGCNT =                   21 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17577064 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  441 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.42645 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   85 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   85 / CS memory monitor #5
ICSMEM06=                   85 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   85 / CS memory monitor #9
ICSMEM10=                   85 / CS memory monitor #10
ICSMEM11=                   85 / CS memory monitor #11
ICSMEM12=                   85 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                   85 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 25 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   13 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36147 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32251113 / Exposure Start Time: MIE coarse
MIFTIMES=            103202948 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32251113 / Exposure Complete: MIE coarse
MIFTIMEC=            103202948 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32251113 / Readout Start: MIE coarse
MIFREADS=            103202948 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32251338 / Readout Complete: MIE coarse
MIFREADC=            103203666 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 26 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   13 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   52 / Observation number
IHDRCNT =                   20 / Number of headers currently in EDAC RAM
IIMGCNT =                   20 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17538976 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  420 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.21977 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   71 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   71 / CS memory monitor #5
ICSMEM06=                   71 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   71 / CS memory monitor #9
ICSMEM10=                   71 / CS memory monitor #10
ICSMEM11=                   71 / CS memory monitor #11
ICSMEM12=                   71 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                   71 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 27 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   14 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36146 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32250889 / Exposure Start Time: MIE coarse
MIFTIMES=            103202230 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32250889 / Exposure Complete: MIE coarse
MIFTIMEC=            103202230 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32250889 / Readout Start: MIE coarse
MIFREADS=            103202230 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32251113 / Readout Complete: MIE coarse
MIFREADC=            103202948 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 28 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   14 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   51 / Observation number
IHDRCNT =                   19 / Number of headers currently in EDAC RAM
IIMGCNT =                   19 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17500888 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  399 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5129 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5213 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.21004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 29 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   15 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36145 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32250885 / Exposure Start Time: MIE coarse
MIFTIMES=            103202218 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32250886 / Exposure Complete: MIE coarse
MIFTIMEC=            103202219 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32250886 / Readout Start: MIE coarse
MIFREADS=            103202219 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32250889 / Readout Complete: MIE coarse
MIFREADC=            103202230 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 30 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   15 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   50 / Observation number
IHDRCNT =                   18 / Number of headers currently in EDAC RAM
IIMGCNT =                   18 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17462800 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  378 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                40219 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5129 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5213 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.54622 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.21004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  230 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 31 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   16 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36144 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32250699 / Exposure Start Time: MIE coarse
MIFTIMES=            103201622 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32250699 / Exposure Complete: MIE coarse
MIFTIMEC=            103201622 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32250699 / Readout Start: MIE coarse
MIFREADS=            103201622 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32250885 / Readout Complete: MIE coarse
MIFREADC=            103202218 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 32 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   16 / extension version number
ROOTNAME= 'ibh719gmq                         ' / rootname of the observation set
EXPNAME = 'ibh719gmq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   49 / Observation number
IHDRCNT =                   17 / Number of headers currently in EDAC RAM
IIMGCNT =                   17 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             17424712 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  357 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3264 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =             0.002442 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5129 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5213 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  232 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  229 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  194 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29379 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 33 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   17 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36175 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32257525 / Exposure Start Time: MIE coarse
MIFTIMES=            103223465 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32257525 / Exposure Complete: MIE coarse
MIFTIMEC=            103223466 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32257525 / Readout Start: MIE coarse
MIFREADS=            103223466 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32257750 / Readout Complete: MIE coarse
MIFREADC=            103224184 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 34 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   17 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   80 / Observation number
IHDRCNT =                   48 / Number of headers currently in EDAC RAM
IIMGCNT =                   48 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18605440 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1008 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40219 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2478 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.38518 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.53348 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    1 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    1 / CS memory monitor #5
ICSMEM06=                    1 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    1 / CS memory monitor #9
ICSMEM10=                    1 / CS memory monitor #10
ICSMEM11=                    1 / CS memory monitor #11
ICSMEM12=                    1 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                    1 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 35 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   18 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36174 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32257301 / Exposure Start Time: MIE coarse
MIFTIMES=            103222747 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32257301 / Exposure Complete: MIE coarse
MIFTIMEC=            103222748 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32257301 / Readout Start: MIE coarse
MIFREADS=            103222748 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32257525 / Readout Complete: MIE coarse
MIFREADC=            103223465 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 36 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   18 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   79 / Observation number
IHDRCNT =                   47 / Number of headers currently in EDAC RAM
IIMGCNT =                   47 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18567352 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  987 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40218 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2673 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.42896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.53348 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  107 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  107 / CS memory monitor #5
ICSMEM06=                  107 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  107 / CS memory monitor #9
ICSMEM10=                  107 / CS memory monitor #10
ICSMEM11=                  107 / CS memory monitor #11
ICSMEM12=                  107 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                  107 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 37 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   19 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36173 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32257076 / Exposure Start Time: MIE coarse
MIFTIMES=            103222029 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32257076 / Exposure Complete: MIE coarse
MIFTIMEC=            103222030 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32257076 / Readout Start: MIE coarse
MIFREADS=            103222030 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32257301 / Readout Complete: MIE coarse
MIFREADC=            103222747 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 38 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   19 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   78 / Observation number
IHDRCNT =                   46 / Number of headers currently in EDAC RAM
IIMGCNT =                   46 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18529264 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  966 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40217 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2673 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.39491 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   92 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   92 / CS memory monitor #5
ICSMEM06=                   92 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   92 / CS memory monitor #9
ICSMEM10=                   92 / CS memory monitor #10
ICSMEM11=                   92 / CS memory monitor #11
ICSMEM12=                   92 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                   92 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 39 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   20 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36172 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32256852 / Exposure Start Time: MIE coarse
MIFTIMES=            103221311 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32256852 / Exposure Complete: MIE coarse
MIFTIMEC=            103221311 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32256852 / Readout Start: MIE coarse
MIFREADS=            103221311 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32257076 / Readout Complete: MIE coarse
MIFREADC=            103222029 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 40 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   20 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   77 / Observation number
IHDRCNT =                   45 / Number of headers currently in EDAC RAM
IIMGCNT =                   45 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18491176 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  945 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40216 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.38518 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.53348 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 41 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   21 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36171 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32256627 / Exposure Start Time: MIE coarse
MIFTIMES=            103220593 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32256628 / Exposure Complete: MIE coarse
MIFTIMEC=            103220593 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32256628 / Readout Start: MIE coarse
MIFREADS=            103220593 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32256852 / Readout Complete: MIE coarse
MIFREADC=            103221311 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 42 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   21 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   76 / Observation number
IHDRCNT =                   44 / Number of headers currently in EDAC RAM
IIMGCNT =                   44 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18453088 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  924 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40218 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2673 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.39977 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 43 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   22 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36170 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32256403 / Exposure Start Time: MIE coarse
MIFTIMES=            103219875 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32256403 / Exposure Complete: MIE coarse
MIFTIMEC=            103219875 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32256403 / Readout Start: MIE coarse
MIFREADS=            103219875 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32256627 / Readout Complete: MIE coarse
MIFREADC=            103220593 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 44 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   22 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   75 / Observation number
IHDRCNT =                   43 / Number of headers currently in EDAC RAM
IIMGCNT =                   43 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18415000 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  903 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40221 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.35599 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   49 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   49 / CS memory monitor #5
ICSMEM06=                   49 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   49 / CS memory monitor #9
ICSMEM10=                   49 / CS memory monitor #10
ICSMEM11=                   49 / CS memory monitor #11
ICSMEM12=                   49 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                   49 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 45 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   23 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36169 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32256179 / Exposure Start Time: MIE coarse
MIFTIMES=            103219157 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32256179 / Exposure Complete: MIE coarse
MIFTIMEC=            103219157 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32256179 / Readout Start: MIE coarse
MIFREADS=            103219157 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32256403 / Readout Complete: MIE coarse
MIFREADC=            103219875 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 46 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   23 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   74 / Observation number
IHDRCNT =                   42 / Number of headers currently in EDAC RAM
IIMGCNT =                   42 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18376912 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  882 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40219 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3064 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.37545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   35 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   35 / CS memory monitor #5
ICSMEM06=                   35 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   35 / CS memory monitor #9
ICSMEM10=                   35 / CS memory monitor #10
ICSMEM11=                   35 / CS memory monitor #11
ICSMEM12=                   35 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                   35 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 47 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   24 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36168 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32255954 / Exposure Start Time: MIE coarse
MIFTIMES=            103218439 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32255954 / Exposure Complete: MIE coarse
MIFTIMEC=            103218439 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32255954 / Readout Start: MIE coarse
MIFREADS=            103218439 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32256179 / Readout Complete: MIE coarse
MIFREADC=            103219157 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 48 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   24 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   73 / Observation number
IHDRCNT =                   41 / Number of headers currently in EDAC RAM
IIMGCNT =                   41 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18338824 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  861 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40217 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3064 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.37058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   21 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   21 / CS memory monitor #5
ICSMEM06=                   21 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   21 / CS memory monitor #9
ICSMEM10=                   21 / CS memory monitor #10
ICSMEM11=                   21 / CS memory monitor #11
ICSMEM12=                   21 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                   21 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 49 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   25 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36167 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32255730 / Exposure Start Time: MIE coarse
MIFTIMES=            103217720 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32255730 / Exposure Complete: MIE coarse
MIFTIMEC=            103217721 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32255730 / Readout Start: MIE coarse
MIFREADS=            103217721 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32255954 / Readout Complete: MIE coarse
MIFREADC=            103218438 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 50 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   25 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   72 / Observation number
IHDRCNT =                   40 / Number of headers currently in EDAC RAM
IIMGCNT =                   40 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18300736 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  840 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40216 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3064 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.38518 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    6 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    6 / CS memory monitor #5
ICSMEM06=                    6 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    6 / CS memory monitor #9
ICSMEM10=                    6 / CS memory monitor #10
ICSMEM11=                    6 / CS memory monitor #11
ICSMEM12=                    6 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29382 / Major frame count
IMINFCNT=                    6 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 51 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   26 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36166 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32255505 / Exposure Start Time: MIE coarse
MIFTIMES=            103217002 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32255505 / Exposure Complete: MIE coarse
MIFTIMEC=            103217003 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32255505 / Readout Start: MIE coarse
MIFREADS=            103217003 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32255730 / Readout Complete: MIE coarse
MIFREADC=            103217720 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 52 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   26 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   71 / Observation number
IHDRCNT =                   39 / Number of headers currently in EDAC RAM
IIMGCNT =                   39 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18262648 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  819 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40218 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3259 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.36085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  112 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  112 / CS memory monitor #5
ICSMEM06=                  112 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  112 / CS memory monitor #9
ICSMEM10=                  112 / CS memory monitor #10
ICSMEM11=                  112 / CS memory monitor #11
ICSMEM12=                  112 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                  112 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 53 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   27 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36165 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32255281 / Exposure Start Time: MIE coarse
MIFTIMES=            103216284 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32255281 / Exposure Complete: MIE coarse
MIFTIMEC=            103216285 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32255281 / Readout Start: MIE coarse
MIFREADS=            103216285 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32255505 / Readout Complete: MIE coarse
MIFREADC=            103217002 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 54 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   27 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   70 / Observation number
IHDRCNT =                   38 / Number of headers currently in EDAC RAM
IIMGCNT =                   38 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18224560 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  798 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40220 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3259 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.34626 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   98 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   98 / CS memory monitor #5
ICSMEM06=                   98 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   98 / CS memory monitor #9
ICSMEM10=                   98 / CS memory monitor #10
ICSMEM11=                   98 / CS memory monitor #11
ICSMEM12=                   98 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                   98 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 55 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   28 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36164 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32255057 / Exposure Start Time: MIE coarse
MIFTIMES=            103215566 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32255057 / Exposure Complete: MIE coarse
MIFTIMEC=            103215566 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32255057 / Readout Start: MIE coarse
MIFREADS=            103215566 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32255281 / Readout Complete: MIE coarse
MIFREADC=            103216284 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 56 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   28 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   69 / Observation number
IHDRCNT =                   37 / Number of headers currently in EDAC RAM
IIMGCNT =                   37 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18186472 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  777 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40219 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3259 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.35112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   83 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   83 / CS memory monitor #5
ICSMEM06=                   83 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   83 / CS memory monitor #9
ICSMEM10=                   83 / CS memory monitor #10
ICSMEM11=                   83 / CS memory monitor #11
ICSMEM12=                   83 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                   83 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 57 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   29 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36163 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32254832 / Exposure Start Time: MIE coarse
MIFTIMES=            103214848 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32254832 / Exposure Complete: MIE coarse
MIFTIMEC=            103214848 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32254832 / Readout Start: MIE coarse
MIFREADS=            103214848 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32255057 / Readout Complete: MIE coarse
MIFREADC=            103215566 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 58 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   29 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   68 / Observation number
IHDRCNT =                   36 / Number of headers currently in EDAC RAM
IIMGCNT =                   36 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18148384 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  756 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40217 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3454 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.33166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   69 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   69 / CS memory monitor #5
ICSMEM06=                   69 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   69 / CS memory monitor #9
ICSMEM10=                   69 / CS memory monitor #10
ICSMEM11=                   69 / CS memory monitor #11
ICSMEM12=                   69 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                   69 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 59 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   30 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36162 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32254608 / Exposure Start Time: MIE coarse
MIFTIMES=            103214130 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32254608 / Exposure Complete: MIE coarse
MIFTIMEC=            103214130 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32254608 / Readout Start: MIE coarse
MIFREADS=            103214130 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32254832 / Readout Complete: MIE coarse
MIFREADC=            103214848 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 60 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   30 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   67 / Observation number
IHDRCNT =                   35 / Number of headers currently in EDAC RAM
IIMGCNT =                   35 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18110296 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  735 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40219 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4822 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.32193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 61 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   31 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36161 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32254604 / Exposure Start Time: MIE coarse
MIFTIMES=            103214118 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32254604 / Exposure Complete: MIE coarse
MIFTIMEC=            103214119 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32254604 / Readout Start: MIE coarse
MIFREADS=            103214119 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32254608 / Readout Complete: MIE coarse
MIFREADC=            103214130 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 62 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   31 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   66 / Observation number
IHDRCNT =                   34 / Number of headers currently in EDAC RAM
IIMGCNT =                   34 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18072208 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  714 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                40183 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4822 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.32193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  232 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 63 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   32 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36160 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32254418 / Exposure Start Time: MIE coarse
MIFTIMES=            103213522 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32254418 / Exposure Complete: MIE coarse
MIFTIMEC=            103213522 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32254418 / Readout Start: MIE coarse
MIFREADS=            103213522 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32254604 / Readout Complete: MIE coarse
MIFREADC=            103214118 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 64 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   32 / extension version number
ROOTNAME= 'ibh719gnq                         ' / rootname of the observation set
EXPNAME = 'ibh719gnq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   65 / Observation number
IHDRCNT =                   33 / Number of headers currently in EDAC RAM
IIMGCNT =                   33 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18034120 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  693 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3265 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4822 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.30734 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.4751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  234 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  231 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  200 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29381 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 65 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   33 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36191 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32261244 / Exposure Start Time: MIE coarse
MIFTIMES=            103235365 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32261244 / Exposure Complete: MIE coarse
MIFTIMEC=            103235366 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32261244 / Readout Start: MIE coarse
MIFREADS=            103235366 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32261468 / Readout Complete: MIE coarse
MIFREADC=            103236083 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 66 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   33 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   96 / Observation number
IHDRCNT =                   64 / Number of headers currently in EDAC RAM
IIMGCNT =                   64 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19214848 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1344 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1305 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.52139 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  119 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  119 / CS memory monitor #5
ICSMEM06=                  119 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  119 / CS memory monitor #9
ICSMEM10=                  119 / CS memory monitor #10
ICSMEM11=                  119 / CS memory monitor #11
ICSMEM12=                  119 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                  119 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 67 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   34 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36190 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32261019 / Exposure Start Time: MIE coarse
MIFTIMES=            103234647 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32261020 / Exposure Complete: MIE coarse
MIFTIMEC=            103234648 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32261020 / Readout Start: MIE coarse
MIFREADS=            103234648 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32261244 / Readout Complete: MIE coarse
MIFREADC=            103235365 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 68 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   34 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   95 / Observation number
IHDRCNT =                   63 / Number of headers currently in EDAC RAM
IIMGCNT =                   63 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19176760 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1323 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1305 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.50193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  105 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  105 / CS memory monitor #5
ICSMEM06=                  105 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  105 / CS memory monitor #9
ICSMEM10=                  105 / CS memory monitor #10
ICSMEM11=                  105 / CS memory monitor #11
ICSMEM12=                  105 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                  105 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 69 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   35 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36189 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32260795 / Exposure Start Time: MIE coarse
MIFTIMES=            103233929 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32260795 / Exposure Complete: MIE coarse
MIFTIMEC=            103233930 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32260795 / Readout Start: MIE coarse
MIFREADS=            103233930 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32261019 / Readout Complete: MIE coarse
MIFREADC=            103234647 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 70 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   35 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   94 / Observation number
IHDRCNT =                   62 / Number of headers currently in EDAC RAM
IIMGCNT =                   62 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19138672 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1302 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.48734 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   90 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   90 / CS memory monitor #5
ICSMEM06=                   90 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   90 / CS memory monitor #9
ICSMEM10=                   90 / CS memory monitor #10
ICSMEM11=                   90 / CS memory monitor #11
ICSMEM12=                   90 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                   90 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 71 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   36 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36188 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32260571 / Exposure Start Time: MIE coarse
MIFTIMES=            103233211 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32260571 / Exposure Complete: MIE coarse
MIFTIMEC=            103233211 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32260571 / Readout Start: MIE coarse
MIFREADS=            103233211 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32260795 / Readout Complete: MIE coarse
MIFREADC=            103233929 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 72 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   36 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   93 / Observation number
IHDRCNT =                   61 / Number of headers currently in EDAC RAM
IIMGCNT =                   61 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19100584 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1281 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.51166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 73 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   37 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36187 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32260346 / Exposure Start Time: MIE coarse
MIFTIMES=            103232493 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32260346 / Exposure Complete: MIE coarse
MIFTIMEC=            103232493 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32260346 / Readout Start: MIE coarse
MIFREADS=            103232493 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32260571 / Readout Complete: MIE coarse
MIFREADC=            103233211 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 74 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   37 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   92 / Observation number
IHDRCNT =                   60 / Number of headers currently in EDAC RAM
IIMGCNT =                   60 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19062496 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1260 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.48734 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 75 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   38 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36186 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32260122 / Exposure Start Time: MIE coarse
MIFTIMES=            103231775 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32260122 / Exposure Complete: MIE coarse
MIFTIMEC=            103231775 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32260122 / Readout Start: MIE coarse
MIFREADS=            103231775 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32260346 / Readout Complete: MIE coarse
MIFREADC=            103232493 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 76 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   38 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   91 / Observation number
IHDRCNT =                   59 / Number of headers currently in EDAC RAM
IIMGCNT =                   59 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19024408 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1239 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.47275 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   47 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   47 / CS memory monitor #5
ICSMEM06=                   47 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   47 / CS memory monitor #9
ICSMEM10=                   47 / CS memory monitor #10
ICSMEM11=                   47 / CS memory monitor #11
ICSMEM12=                   47 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                   47 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 77 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   39 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36185 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32259897 / Exposure Start Time: MIE coarse
MIFTIMES=            103231057 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32259897 / Exposure Complete: MIE coarse
MIFTIMEC=            103231057 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32259897 / Readout Start: MIE coarse
MIFREADS=            103231057 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32260122 / Readout Complete: MIE coarse
MIFREADC=            103231775 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 78 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   39 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   90 / Observation number
IHDRCNT =                   58 / Number of headers currently in EDAC RAM
IIMGCNT =                   58 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18986320 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1218 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.48248 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.48483 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   33 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   33 / CS memory monitor #5
ICSMEM06=                   33 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   33 / CS memory monitor #9
ICSMEM10=                   33 / CS memory monitor #10
ICSMEM11=                   33 / CS memory monitor #11
ICSMEM12=                   33 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                   33 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 79 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   40 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36184 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32259673 / Exposure Start Time: MIE coarse
MIFTIMES=            103230338 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32259673 / Exposure Complete: MIE coarse
MIFTIMEC=            103230339 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32259673 / Readout Start: MIE coarse
MIFREADS=            103230339 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32259897 / Readout Complete: MIE coarse
MIFREADC=            103231056 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 80 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   40 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   89 / Observation number
IHDRCNT =                   57 / Number of headers currently in EDAC RAM
IIMGCNT =                   57 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18948232 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1197 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.45815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   19 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   19 / CS memory monitor #5
ICSMEM06=                   19 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   19 / CS memory monitor #9
ICSMEM10=                   19 / CS memory monitor #10
ICSMEM11=                   19 / CS memory monitor #11
ICSMEM12=                   19 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                   19 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 81 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   41 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36183 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32259449 / Exposure Start Time: MIE coarse
MIFTIMES=            103229620 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32259449 / Exposure Complete: MIE coarse
MIFTIMEC=            103229621 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32259449 / Readout Start: MIE coarse
MIFREADS=            103229621 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32259673 / Readout Complete: MIE coarse
MIFREADC=            103230338 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 82 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   41 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   88 / Observation number
IHDRCNT =                   56 / Number of headers currently in EDAC RAM
IIMGCNT =                   56 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18910144 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1176 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1892 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.45329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    4 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    4 / CS memory monitor #5
ICSMEM06=                    4 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    4 / CS memory monitor #9
ICSMEM10=                    4 / CS memory monitor #10
ICSMEM11=                    4 / CS memory monitor #11
ICSMEM12=                    4 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29384 / Major frame count
IMINFCNT=                    4 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 83 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   42 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36182 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32259224 / Exposure Start Time: MIE coarse
MIFTIMES=            103228902 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32259224 / Exposure Complete: MIE coarse
MIFTIMEC=            103228903 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32259224 / Readout Start: MIE coarse
MIFREADS=            103228903 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32259448 / Readout Complete: MIE coarse
MIFREADC=            103229620 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 84 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   42 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   87 / Observation number
IHDRCNT =                   55 / Number of headers currently in EDAC RAM
IIMGCNT =                   55 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18872056 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1155 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1892 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.43869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  110 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  110 / CS memory monitor #5
ICSMEM06=                  110 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  110 / CS memory monitor #9
ICSMEM10=                  110 / CS memory monitor #10
ICSMEM11=                  110 / CS memory monitor #11
ICSMEM12=                  110 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                  110 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 85 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   43 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36181 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32259000 / Exposure Start Time: MIE coarse
MIFTIMES=            103228184 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32259000 / Exposure Complete: MIE coarse
MIFTIMEC=            103228184 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32259000 / Readout Start: MIE coarse
MIFREADS=            103228184 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32259224 / Readout Complete: MIE coarse
MIFREADC=            103228902 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 86 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   43 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   86 / Observation number
IHDRCNT =                   54 / Number of headers currently in EDAC RAM
IIMGCNT =                   54 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18833968 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1134 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.1844 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.43383 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   96 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   96 / CS memory monitor #5
ICSMEM06=                   96 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   96 / CS memory monitor #9
ICSMEM10=                   96 / CS memory monitor #10
ICSMEM11=                   96 / CS memory monitor #11
ICSMEM12=                   96 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                   96 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 87 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   44 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36180 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32258775 / Exposure Start Time: MIE coarse
MIFTIMES=            103227466 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32258775 / Exposure Complete: MIE coarse
MIFTIMEC=            103227466 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32258775 / Readout Start: MIE coarse
MIFREADS=            103227466 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32259000 / Readout Complete: MIE coarse
MIFREADC=            103228184 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 88 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   44 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   85 / Observation number
IHDRCNT =                   53 / Number of headers currently in EDAC RAM
IIMGCNT =                   53 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18795880 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1113 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.43869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.48483 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   81 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   81 / CS memory monitor #5
ICSMEM06=                   81 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   81 / CS memory monitor #9
ICSMEM10=                   81 / CS memory monitor #10
ICSMEM11=                   81 / CS memory monitor #11
ICSMEM12=                   81 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                   81 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 89 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   45 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36179 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32258551 / Exposure Start Time: MIE coarse
MIFTIMES=            103226748 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32258551 / Exposure Complete: MIE coarse
MIFTIMEC=            103226748 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32258551 / Readout Start: MIE coarse
MIFREADS=            103226748 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32258775 / Readout Complete: MIE coarse
MIFREADC=            103227466 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 90 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   45 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   84 / Observation number
IHDRCNT =                   52 / Number of headers currently in EDAC RAM
IIMGCNT =                   52 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18757792 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1092 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.4095 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   67 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   67 / CS memory monitor #5
ICSMEM06=                   67 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   67 / CS memory monitor #9
ICSMEM10=                   67 / CS memory monitor #10
ICSMEM11=                   67 / CS memory monitor #11
ICSMEM12=                   67 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                   67 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 91 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   46 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36178 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32258326 / Exposure Start Time: MIE coarse
MIFTIMES=            103226030 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32258327 / Exposure Complete: MIE coarse
MIFTIMEC=            103226030 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32258327 / Readout Start: MIE coarse
MIFREADS=            103226030 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32258551 / Readout Complete: MIE coarse
MIFREADC=            103226748 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 92 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   46 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   83 / Observation number
IHDRCNT =                   51 / Number of headers currently in EDAC RAM
IIMGCNT =                   51 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18719704 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1071 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.4095 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 93 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   47 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36177 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32258323 / Exposure Start Time: MIE coarse
MIFTIMES=            103226018 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32258323 / Exposure Complete: MIE coarse
MIFTIMEC=            103226019 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32258323 / Readout Start: MIE coarse
MIFREADS=            103226019 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32258326 / Readout Complete: MIE coarse
MIFREADC=            103226029 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                  0.1 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 94 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   47 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   82 / Observation number
IHDRCNT =                   50 / Number of headers currently in EDAC RAM
IIMGCNT =                   50 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18681616 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1050 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                40212 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.42896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  234 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 95 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   48 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36176 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32258136 / Exposure Start Time: MIE coarse
MIFTIMES=            103225422 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32258137 / Exposure Complete: MIE coarse
MIFTIMEC=            103225422 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32258137 / Readout Start: MIE coarse
MIFREADS=            103225422 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32258323 / Readout Complete: MIE coarse
MIFREADC=            103226018 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 96 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   48 / extension version number
ROOTNAME= 'ibh719goq                         ' / rootname of the observation set
EXPNAME = 'ibh719goq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   81 / Observation number
IHDRCNT =                   49 / Number of headers currently in EDAC RAM
IIMGCNT =                   49 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             18643528 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1029 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3266 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              3.57143 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5324 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.41923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.48483 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  236 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  233 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  206 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29383 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 97 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   49 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36207 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32264963 / Exposure Start Time: MIE coarse
MIFTIMES=            103247265 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32264963 / Exposure Complete: MIE coarse
MIFTIMEC=            103247266 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32264963 / Readout Start: MIE coarse
MIFREADS=            103247266 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32265187 / Readout Complete: MIE coarse
MIFREADC=            103247983 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 98 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   49 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  112 / Observation number
IHDRCNT =                   80 / Number of headers currently in EDAC RAM
IIMGCNT =                   80 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19824256 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1680 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0524 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.3778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  117 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  117 / CS memory monitor #5
ICSMEM06=                  117 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  117 / CS memory monitor #9
ICSMEM10=                  117 / CS memory monitor #10
ICSMEM11=                  117 / CS memory monitor #11
ICSMEM12=                  117 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                  117 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 99 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   50 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36206 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32264738 / Exposure Start Time: MIE coarse
MIFTIMES=            103246547 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32264738 / Exposure Complete: MIE coarse
MIFTIMEC=            103246548 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32264738 / Readout Start: MIE coarse
MIFREADS=            103246548 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32264963 / Readout Complete: MIE coarse
MIFREADC=            103247265 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 100 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   50 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  111 / Observation number
IHDRCNT =                   79 / Number of headers currently in EDAC RAM
IIMGCNT =                   79 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19786168 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1659 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0329 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.3778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  103 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  103 / CS memory monitor #5
ICSMEM06=                  103 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  103 / CS memory monitor #9
ICSMEM10=                  103 / CS memory monitor #10
ICSMEM11=                  103 / CS memory monitor #11
ICSMEM12=                  103 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                  103 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 101 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   51 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36205 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32264514 / Exposure Start Time: MIE coarse
MIFTIMES=            103245829 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32264514 / Exposure Complete: MIE coarse
MIFTIMEC=            103245829 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32264514 / Readout Start: MIE coarse
MIFREADS=            103245829 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32264738 / Readout Complete: MIE coarse
MIFREADC=            103246547 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 102 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   51 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  110 / Observation number
IHDRCNT =                   78 / Number of headers currently in EDAC RAM
IIMGCNT =                   78 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19748080 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1638 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0524 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.53112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.43618 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   88 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   88 / CS memory monitor #5
ICSMEM06=                   88 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   88 / CS memory monitor #9
ICSMEM10=                   88 / CS memory monitor #10
ICSMEM11=                   88 / CS memory monitor #11
ICSMEM12=                   88 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                   88 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 103 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   52 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36204 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32264289 / Exposure Start Time: MIE coarse
MIFTIMES=            103245111 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32264289 / Exposure Complete: MIE coarse
MIFTIMEC=            103245111 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32264290 / Readout Start: MIE coarse
MIFREADS=            103245111 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32264514 / Readout Complete: MIE coarse
MIFREADC=            103245829 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 104 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   52 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  109 / Observation number
IHDRCNT =                   77 / Number of headers currently in EDAC RAM
IIMGCNT =                   77 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19709992 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1617 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.61717 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0524 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.55058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 105 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   53 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36203 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32264065 / Exposure Start Time: MIE coarse
MIFTIMES=            103244393 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32264065 / Exposure Complete: MIE coarse
MIFTIMEC=            103244393 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32264065 / Readout Start: MIE coarse
MIFREADS=            103244393 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32264289 / Readout Complete: MIE coarse
MIFREADC=            103245111 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 106 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   53 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  108 / Observation number
IHDRCNT =                   76 / Number of headers currently in EDAC RAM
IIMGCNT =                   76 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19671904 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1596 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0524 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.57491 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 107 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   54 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36202 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32263841 / Exposure Start Time: MIE coarse
MIFTIMES=            103243675 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32263841 / Exposure Complete: MIE coarse
MIFTIMEC=            103243675 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32263841 / Readout Start: MIE coarse
MIFREADS=            103243675 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32264065 / Readout Complete: MIE coarse
MIFREADC=            103244393 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 108 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   54 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  107 / Observation number
IHDRCNT =                   75 / Number of headers currently in EDAC RAM
IIMGCNT =                   75 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19633816 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1575 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.54572 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.44591 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   45 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   45 / CS memory monitor #5
ICSMEM06=                   45 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   45 / CS memory monitor #9
ICSMEM10=                   45 / CS memory monitor #10
ICSMEM11=                   45 / CS memory monitor #11
ICSMEM12=                   45 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                   45 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 109 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   55 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36201 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32263616 / Exposure Start Time: MIE coarse
MIFTIMES=            103242956 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32263616 / Exposure Complete: MIE coarse
MIFTIMEC=            103242957 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32263616 / Readout Start: MIE coarse
MIFREADS=            103242957 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32263841 / Readout Complete: MIE coarse
MIFREADC=            103243675 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 110 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   55 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  106 / Observation number
IHDRCNT =                   74 / Number of headers currently in EDAC RAM
IIMGCNT =                   74 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19595728 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1554 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.54085 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.4751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   31 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   31 / CS memory monitor #5
ICSMEM06=                   31 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   31 / CS memory monitor #9
ICSMEM10=                   31 / CS memory monitor #10
ICSMEM11=                   31 / CS memory monitor #11
ICSMEM12=                   31 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                   31 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 111 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   56 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36200 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32263392 / Exposure Start Time: MIE coarse
MIFTIMES=            103242238 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32263392 / Exposure Complete: MIE coarse
MIFTIMEC=            103242239 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32263392 / Readout Start: MIE coarse
MIFREADS=            103242239 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32263616 / Readout Complete: MIE coarse
MIFREADC=            103242956 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 112 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   56 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  105 / Observation number
IHDRCNT =                   73 / Number of headers currently in EDAC RAM
IIMGCNT =                   73 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19557640 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1533 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.52626 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.50429 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   17 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   17 / CS memory monitor #5
ICSMEM06=                   17 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   17 / CS memory monitor #9
ICSMEM10=                   17 / CS memory monitor #10
ICSMEM11=                   17 / CS memory monitor #11
ICSMEM12=                   17 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                   17 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 113 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   57 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36199 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32263167 / Exposure Start Time: MIE coarse
MIFTIMES=            103241520 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32263167 / Exposure Complete: MIE coarse
MIFTIMEC=            103241521 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32263167 / Readout Start: MIE coarse
MIFREADS=            103241521 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32263392 / Readout Complete: MIE coarse
MIFREADC=            103242238 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 114 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   57 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  104 / Observation number
IHDRCNT =                   72 / Number of headers currently in EDAC RAM
IIMGCNT =                   72 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19519552 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1512 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.55058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    2 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    2 / CS memory monitor #5
ICSMEM06=                    2 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    2 / CS memory monitor #9
ICSMEM10=                    2 / CS memory monitor #10
ICSMEM11=                    2 / CS memory monitor #11
ICSMEM12=                    2 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29386 / Major frame count
IMINFCNT=                    2 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 115 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   58 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36198 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32262943 / Exposure Start Time: MIE coarse
MIFTIMES=            103240802 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32262943 / Exposure Complete: MIE coarse
MIFTIMEC=            103240802 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32262943 / Readout Start: MIE coarse
MIFREADS=            103240802 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32263167 / Readout Complete: MIE coarse
MIFREADC=            103241520 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 116 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   58 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  103 / Observation number
IHDRCNT =                   71 / Number of headers currently in EDAC RAM
IIMGCNT =                   71 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19481464 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1491 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.53599 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  108 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  108 / CS memory monitor #5
ICSMEM06=                  108 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  108 / CS memory monitor #9
ICSMEM10=                  108 / CS memory monitor #10
ICSMEM11=                  108 / CS memory monitor #11
ICSMEM12=                  108 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                  108 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 117 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   59 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36197 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32262718 / Exposure Start Time: MIE coarse
MIFTIMES=            103240084 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32262719 / Exposure Complete: MIE coarse
MIFTIMEC=            103240084 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32262719 / Readout Start: MIE coarse
MIFREADS=            103240084 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32262943 / Readout Complete: MIE coarse
MIFREADC=            103240802 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 118 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   59 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  102 / Observation number
IHDRCNT =                   70 / Number of headers currently in EDAC RAM
IIMGCNT =                   70 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19443376 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1470 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.55545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   94 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   94 / CS memory monitor #5
ICSMEM06=                   94 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   94 / CS memory monitor #9
ICSMEM10=                   94 / CS memory monitor #10
ICSMEM11=                   94 / CS memory monitor #11
ICSMEM12=                   94 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                   94 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 119 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   60 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36196 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32262494 / Exposure Start Time: MIE coarse
MIFTIMES=            103239366 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32262494 / Exposure Complete: MIE coarse
MIFTIMEC=            103239366 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32262494 / Readout Start: MIE coarse
MIFREADS=            103239366 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32262718 / Readout Complete: MIE coarse
MIFREADC=            103240084 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 120 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   60 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  101 / Observation number
IHDRCNT =                   69 / Number of headers currently in EDAC RAM
IIMGCNT =                   69 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19405288 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1449 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5519 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.54085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   79 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   79 / CS memory monitor #5
ICSMEM06=                   79 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   79 / CS memory monitor #9
ICSMEM10=                   79 / CS memory monitor #10
ICSMEM11=                   79 / CS memory monitor #11
ICSMEM12=                   79 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                   79 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 121 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   61 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36195 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32262270 / Exposure Start Time: MIE coarse
MIFTIMES=            103238648 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32262270 / Exposure Complete: MIE coarse
MIFTIMEC=            103238648 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32262270 / Readout Start: MIE coarse
MIFREADS=            103238648 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32262494 / Readout Complete: MIE coarse
MIFREADC=            103239366 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 122 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   61 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  100 / Observation number
IHDRCNT =                   68 / Number of headers currently in EDAC RAM
IIMGCNT =                   68 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19367200 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1428 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.54572 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.53348 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   65 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   65 / CS memory monitor #5
ICSMEM06=                   65 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   65 / CS memory monitor #9
ICSMEM10=                   65 / CS memory monitor #10
ICSMEM11=                   65 / CS memory monitor #11
ICSMEM12=                   65 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                   65 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 123 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   62 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36194 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32262045 / Exposure Start Time: MIE coarse
MIFTIMES=            103237929 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32262045 / Exposure Complete: MIE coarse
MIFTIMEC=            103237930 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32262045 / Readout Start: MIE coarse
MIFREADS=            103237930 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32262270 / Readout Complete: MIE coarse
MIFREADC=            103238648 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 124 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   62 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   99 / Observation number
IHDRCNT =                   67 / Number of headers currently in EDAC RAM
IIMGCNT =                   67 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19329112 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1407 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.61717 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.55545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 125 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   63 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36193 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32262042 / Exposure Start Time: MIE coarse
MIFTIMES=            103237918 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32262042 / Exposure Complete: MIE coarse
MIFTIMEC=            103237919 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32262042 / Readout Start: MIE coarse
MIFREADS=            103237919 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32262045 / Readout Complete: MIE coarse
MIFREADC=            103237929 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                  0.1 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 126 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   63 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   98 / Observation number
IHDRCNT =                   66 / Number of headers currently in EDAC RAM
IIMGCNT =                   66 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19291024 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1386 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                40229 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.61717 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.55545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  236 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 127 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   64 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36192 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32261855 / Exposure Start Time: MIE coarse
MIFTIMES=            103237322 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32261855 / Exposure Complete: MIE coarse
MIFTIMEC=            103237322 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32261855 / Readout Start: MIE coarse
MIFREADS=            103237322 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32262042 / Readout Complete: MIE coarse
MIFREADC=            103237918 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 128 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   64 / extension version number
ROOTNAME= 'ibh719gpq                         ' / rootname of the observation set
EXPNAME = 'ibh719gpq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                   97 / Observation number
IHDRCNT =                   65 / Number of headers currently in EDAC RAM
IIMGCNT =                   65 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19252936 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1365 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3267 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -11.6167 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.52139 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.53348 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  238 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  235 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  212 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29385 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 129 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   65 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36223 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32268681 / Exposure Start Time: MIE coarse
MIFTIMES=            103259165 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32268682 / Exposure Complete: MIE coarse
MIFTIMEC=            103259166 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32268682 / Readout Start: MIE coarse
MIFREADS=            103259166 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32268906 / Readout Complete: MIE coarse
MIFREADC=            103259883 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 130 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   65 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  128 / Observation number
IHDRCNT =                   96 / Number of headers currently in EDAC RAM
IIMGCNT =                   96 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20433664 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2016 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.60896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.35834 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  115 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  115 / CS memory monitor #5
ICSMEM06=                  115 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  115 / CS memory monitor #9
ICSMEM10=                  115 / CS memory monitor #10
ICSMEM11=                  115 / CS memory monitor #11
ICSMEM12=                  115 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                  115 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 131 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   66 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36222 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32268457 / Exposure Start Time: MIE coarse
MIFTIMES=            103258447 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32268457 / Exposure Complete: MIE coarse
MIFTIMEC=            103258447 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32268457 / Readout Start: MIE coarse
MIFREADS=            103258447 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32268681 / Readout Complete: MIE coarse
MIFREADC=            103259165 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 132 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   66 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  127 / Observation number
IHDRCNT =                   95 / Number of headers currently in EDAC RAM
IIMGCNT =                   95 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20395576 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1995 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.53905 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.63329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  101 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  101 / CS memory monitor #5
ICSMEM06=                  101 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  101 / CS memory monitor #9
ICSMEM10=                  101 / CS memory monitor #10
ICSMEM11=                  101 / CS memory monitor #11
ICSMEM12=                  101 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                  101 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 133 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   67 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36221 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32268233 / Exposure Start Time: MIE coarse
MIFTIMES=            103257729 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32268233 / Exposure Complete: MIE coarse
MIFTIMEC=            103257729 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32268233 / Readout Start: MIE coarse
MIFREADS=            103257729 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32268457 / Readout Complete: MIE coarse
MIFREADC=            103258447 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 134 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   67 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  126 / Observation number
IHDRCNT =                   94 / Number of headers currently in EDAC RAM
IIMGCNT =                   94 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20357488 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1974 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.61869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.36807 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   86 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   86 / CS memory monitor #5
ICSMEM06=                   86 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   86 / CS memory monitor #9
ICSMEM10=                   86 / CS memory monitor #10
ICSMEM11=                   86 / CS memory monitor #11
ICSMEM12=                   86 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                   86 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 135 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   68 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36220 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32268008 / Exposure Start Time: MIE coarse
MIFTIMES=            103257011 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32268008 / Exposure Complete: MIE coarse
MIFTIMEC=            103257011 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32268008 / Readout Start: MIE coarse
MIFREADS=            103257011 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32268233 / Readout Complete: MIE coarse
MIFREADC=            103257729 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 136 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   68 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  125 / Observation number
IHDRCNT =                   93 / Number of headers currently in EDAC RAM
IIMGCNT =                   93 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20319400 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1953 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.59923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.36807 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 137 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   69 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36219 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32267784 / Exposure Start Time: MIE coarse
MIFTIMES=            103256293 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32267784 / Exposure Complete: MIE coarse
MIFTIMEC=            103256293 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32267784 / Readout Start: MIE coarse
MIFREADS=            103256293 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32268008 / Readout Complete: MIE coarse
MIFREADC=            103257011 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 138 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   69 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  124 / Observation number
IHDRCNT =                   92 / Number of headers currently in EDAC RAM
IIMGCNT =                   92 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20281312 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1932 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.204 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 139 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   70 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36218 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32267559 / Exposure Start Time: MIE coarse
MIFTIMES=            103255574 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32267559 / Exposure Complete: MIE coarse
MIFTIMEC=            103255575 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32267559 / Readout Start: MIE coarse
MIFREADS=            103255575 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32267784 / Readout Complete: MIE coarse
MIFREADC=            103256293 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 140 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   70 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  123 / Observation number
IHDRCNT =                   91 / Number of headers currently in EDAC RAM
IIMGCNT =                   91 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20243224 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1911 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.59923 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.3778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   43 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   43 / CS memory monitor #5
ICSMEM06=                   43 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   43 / CS memory monitor #9
ICSMEM10=                   43 / CS memory monitor #10
ICSMEM11=                   43 / CS memory monitor #11
ICSMEM12=                   43 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                   43 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 141 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   71 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36217 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32267335 / Exposure Start Time: MIE coarse
MIFTIMES=            103254856 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32267335 / Exposure Complete: MIE coarse
MIFTIMEC=            103254857 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32267335 / Readout Start: MIE coarse
MIFREADS=            103254857 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32267559 / Readout Complete: MIE coarse
MIFREADC=            103255574 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 142 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   71 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  122 / Observation number
IHDRCNT =                   90 / Number of headers currently in EDAC RAM
IIMGCNT =                   90 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20205136 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1890 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   29 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   29 / CS memory monitor #5
ICSMEM06=                   29 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   29 / CS memory monitor #9
ICSMEM10=                   29 / CS memory monitor #10
ICSMEM11=                   29 / CS memory monitor #11
ICSMEM12=                   29 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                   29 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 143 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   72 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36216 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32267110 / Exposure Start Time: MIE coarse
MIFTIMES=            103254138 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32267111 / Exposure Complete: MIE coarse
MIFTIMEC=            103254139 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32267111 / Readout Start: MIE coarse
MIFREADS=            103254139 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32267335 / Readout Complete: MIE coarse
MIFREADC=            103254856 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 144 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   72 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  121 / Observation number
IHDRCNT =                   89 / Number of headers currently in EDAC RAM
IIMGCNT =                   89 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20167048 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1869 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   15 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   15 / CS memory monitor #5
ICSMEM06=                   15 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   15 / CS memory monitor #9
ICSMEM10=                   15 / CS memory monitor #10
ICSMEM11=                   15 / CS memory monitor #11
ICSMEM12=                   15 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                   15 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 145 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   73 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36215 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32266886 / Exposure Start Time: MIE coarse
MIFTIMES=            103253420 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32266886 / Exposure Complete: MIE coarse
MIFTIMEC=            103253421 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32266886 / Readout Start: MIE coarse
MIFREADS=            103253421 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32267110 / Readout Complete: MIE coarse
MIFREADC=            103254138 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 146 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   73 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  120 / Observation number
IHDRCNT =                   88 / Number of headers currently in EDAC RAM
IIMGCNT =                   88 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20128960 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1848 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.3778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    0 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    0 / CS memory monitor #5
ICSMEM06=                    0 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    0 / CS memory monitor #9
ICSMEM10=                    0 / CS memory monitor #10
ICSMEM11=                    0 / CS memory monitor #11
ICSMEM12=                    0 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29388 / Major frame count
IMINFCNT=                    0 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 147 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   74 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36214 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32266662 / Exposure Start Time: MIE coarse
MIFTIMES=            103252702 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32266662 / Exposure Complete: MIE coarse
MIFTIMEC=            103252702 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32266662 / Readout Start: MIE coarse
MIFREADS=            103252702 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32266886 / Readout Complete: MIE coarse
MIFREADC=            103253420 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 148 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   74 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  119 / Observation number
IHDRCNT =                   87 / Number of headers currently in EDAC RAM
IIMGCNT =                   87 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20090872 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1827 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  106 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  106 / CS memory monitor #5
ICSMEM06=                  106 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  106 / CS memory monitor #9
ICSMEM10=                  106 / CS memory monitor #10
ICSMEM11=                  106 / CS memory monitor #11
ICSMEM12=                  106 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                  106 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 149 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   75 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36213 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32266437 / Exposure Start Time: MIE coarse
MIFTIMES=            103251984 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32266437 / Exposure Complete: MIE coarse
MIFTIMEC=            103251984 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32266437 / Readout Start: MIE coarse
MIFREADS=            103251984 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32266662 / Readout Complete: MIE coarse
MIFREADC=            103252702 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 150 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   75 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  118 / Observation number
IHDRCNT =                   86 / Number of headers currently in EDAC RAM
IIMGCNT =                   86 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20052784 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1806 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   92 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   92 / CS memory monitor #5
ICSMEM06=                   92 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   92 / CS memory monitor #9
ICSMEM10=                   92 / CS memory monitor #10
ICSMEM11=                   92 / CS memory monitor #11
ICSMEM12=                   92 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                   92 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 151 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   76 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36212 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32266213 / Exposure Start Time: MIE coarse
MIFTIMES=            103251266 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32266213 / Exposure Complete: MIE coarse
MIFTIMEC=            103251266 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32266213 / Readout Start: MIE coarse
MIFREADS=            103251266 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32266437 / Readout Complete: MIE coarse
MIFREADC=            103251984 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 152 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   76 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  117 / Observation number
IHDRCNT =                   85 / Number of headers currently in EDAC RAM
IIMGCNT =                   85 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20014696 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1785 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.5715 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   77 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   77 / CS memory monitor #5
ICSMEM06=                   77 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   77 / CS memory monitor #9
ICSMEM10=                   77 / CS memory monitor #10
ICSMEM11=                   77 / CS memory monitor #11
ICSMEM12=                   77 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                   77 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 153 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   77 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36211 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32265988 / Exposure Start Time: MIE coarse
MIFTIMES=            103250548 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32265988 / Exposure Complete: MIE coarse
MIFTIMEC=            103250548 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32265988 / Readout Start: MIE coarse
MIFREADS=            103250548 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32266213 / Readout Complete: MIE coarse
MIFREADC=            103251266 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 154 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   77 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  116 / Observation number
IHDRCNT =                   84 / Number of headers currently in EDAC RAM
IIMGCNT =                   84 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19976608 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1764 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.57977 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   63 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   63 / CS memory monitor #5
ICSMEM06=                   63 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   63 / CS memory monitor #9
ICSMEM10=                   63 / CS memory monitor #10
ICSMEM11=                   63 / CS memory monitor #11
ICSMEM12=                   63 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                   63 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 155 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   78 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36210 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32265764 / Exposure Start Time: MIE coarse
MIFTIMES=            103249829 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32265764 / Exposure Complete: MIE coarse
MIFTIMEC=            103249830 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32265764 / Readout Start: MIE coarse
MIFREADS=            103249830 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32265988 / Readout Complete: MIE coarse
MIFREADC=            103250547 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 156 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   78 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  115 / Observation number
IHDRCNT =                   83 / Number of headers currently in EDAC RAM
IIMGCNT =                   83 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19938520 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1743 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 157 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   79 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36209 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32265760 / Exposure Start Time: MIE coarse
MIFTIMES=            103249818 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32265761 / Exposure Complete: MIE coarse
MIFTIMEC=            103249819 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32265761 / Readout Start: MIE coarse
MIFREADS=            103249819 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32265764 / Readout Complete: MIE coarse
MIFREADC=            103249829 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                  0.1 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 158 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   79 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  114 / Observation number
IHDRCNT =                   82 / Number of headers currently in EDAC RAM
IIMGCNT =                   82 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19900432 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1722 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                40210 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.57977 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  238 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 159 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   80 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36208 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32265574 / Exposure Start Time: MIE coarse
MIFTIMES=            103249221 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32265574 / Exposure Complete: MIE coarse
MIFTIMEC=            103249222 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32265574 / Readout Start: MIE coarse
MIFREADS=            103249222 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32265760 / Readout Complete: MIE coarse
MIFREADC=            103249818 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 160 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   80 / extension version number
ROOTNAME= 'ibh719gqq                         ' / rootname of the observation set
EXPNAME = 'ibh719gqq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  113 / Observation number
IHDRCNT =                   81 / Number of headers currently in EDAC RAM
IIMGCNT =                   81 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             19862344 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1701 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3268 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  240 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  237 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  218 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29387 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 161 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   81 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36239 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32272400 / Exposure Start Time: MIE coarse
MIFTIMES=            103271065 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32272400 / Exposure Complete: MIE coarse
MIFTIMEC=            103271066 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32272400 / Readout Start: MIE coarse
MIFREADS=            103271066 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32272625 / Readout Complete: MIE coarse
MIFREADC=            103271783 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 162 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   81 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  144 / Observation number
IHDRCNT =                  112 / Number of headers currently in EDAC RAM
IIMGCNT =                  112 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21043072 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2352 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.61869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.46537 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  113 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  113 / CS memory monitor #5
ICSMEM06=                  113 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  113 / CS memory monitor #9
ICSMEM10=                  113 / CS memory monitor #10
ICSMEM11=                  113 / CS memory monitor #11
ICSMEM12=                  113 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                  113 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 163 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   82 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36238 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32272176 / Exposure Start Time: MIE coarse
MIFTIMES=            103270347 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32272176 / Exposure Complete: MIE coarse
MIFTIMEC=            103270347 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32272176 / Readout Start: MIE coarse
MIFREADS=            103270347 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32272400 / Readout Complete: MIE coarse
MIFREADC=            103271065 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 164 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   82 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  143 / Observation number
IHDRCNT =                  111 / Number of headers currently in EDAC RAM
IIMGCNT =                  111 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21004984 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2331 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.63329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.43618 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   99 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   99 / CS memory monitor #5
ICSMEM06=                   99 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   99 / CS memory monitor #9
ICSMEM10=                   99 / CS memory monitor #10
ICSMEM11=                   99 / CS memory monitor #11
ICSMEM12=                   99 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   99 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 165 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   83 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36237 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32271951 / Exposure Start Time: MIE coarse
MIFTIMES=            103269629 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32271951 / Exposure Complete: MIE coarse
MIFTIMEC=            103269629 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32271951 / Readout Start: MIE coarse
MIFREADS=            103269629 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32272176 / Readout Complete: MIE coarse
MIFREADC=            103270347 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 166 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   83 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  142 / Observation number
IHDRCNT =                  110 / Number of headers currently in EDAC RAM
IIMGCNT =                  110 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20966896 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2310 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.45564 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 167 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   84 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36236 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32271727 / Exposure Start Time: MIE coarse
MIFTIMES=            103268911 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32271727 / Exposure Complete: MIE coarse
MIFTIMEC=            103268911 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32271727 / Readout Start: MIE coarse
MIFREADS=            103268911 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32271951 / Readout Complete: MIE coarse
MIFREADC=            103269629 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 168 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   84 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  141 / Observation number
IHDRCNT =                  109 / Number of headers currently in EDAC RAM
IIMGCNT =                  109 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20928808 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2289 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.44591 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 169 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   85 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36235 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32271502 / Exposure Start Time: MIE coarse
MIFTIMES=            103268193 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32271503 / Exposure Complete: MIE coarse
MIFTIMEC=            103268193 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32271503 / Readout Start: MIE coarse
MIFREADS=            103268193 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32271727 / Readout Complete: MIE coarse
MIFREADC=            103268911 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 170 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   85 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  140 / Observation number
IHDRCNT =                  108 / Number of headers currently in EDAC RAM
IIMGCNT =                  108 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20890720 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2268 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 171 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   86 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36234 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32271278 / Exposure Start Time: MIE coarse
MIFTIMES=            103267474 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32271278 / Exposure Complete: MIE coarse
MIFTIMEC=            103267475 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32271278 / Readout Start: MIE coarse
MIFREADS=            103267475 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32271502 / Readout Complete: MIE coarse
MIFREADC=            103268192 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 172 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   86 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  139 / Observation number
IHDRCNT =                  107 / Number of headers currently in EDAC RAM
IIMGCNT =                  107 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20852632 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2247 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.42645 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   41 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   41 / CS memory monitor #5
ICSMEM06=                   41 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   41 / CS memory monitor #9
ICSMEM10=                   41 / CS memory monitor #10
ICSMEM11=                   41 / CS memory monitor #11
ICSMEM12=                   41 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   41 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 173 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   87 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36233 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32271054 / Exposure Start Time: MIE coarse
MIFTIMES=            103266756 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32271054 / Exposure Complete: MIE coarse
MIFTIMEC=            103266757 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32271054 / Readout Start: MIE coarse
MIFREADS=            103266757 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32271278 / Readout Complete: MIE coarse
MIFREADC=            103267474 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 174 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   87 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  138 / Observation number
IHDRCNT =                  106 / Number of headers currently in EDAC RAM
IIMGCNT =                  106 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20814544 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2226 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.63815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.42645 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   27 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   27 / CS memory monitor #5
ICSMEM06=                   27 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   27 / CS memory monitor #9
ICSMEM10=                   27 / CS memory monitor #10
ICSMEM11=                   27 / CS memory monitor #11
ICSMEM12=                   27 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   27 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 175 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   88 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36232 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32270829 / Exposure Start Time: MIE coarse
MIFTIMES=            103266038 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32270829 / Exposure Complete: MIE coarse
MIFTIMEC=            103266039 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32270829 / Readout Start: MIE coarse
MIFREADS=            103266039 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32271054 / Readout Complete: MIE coarse
MIFREADC=            103266756 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 176 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   88 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  137 / Observation number
IHDRCNT =                  105 / Number of headers currently in EDAC RAM
IIMGCNT =                  105 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20776456 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2205 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.59923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   13 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   13 / CS memory monitor #5
ICSMEM06=                   13 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   13 / CS memory monitor #9
ICSMEM10=                   13 / CS memory monitor #10
ICSMEM11=                   13 / CS memory monitor #11
ICSMEM12=                   13 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29390 / Major frame count
IMINFCNT=                   13 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 177 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   89 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36231 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32270605 / Exposure Start Time: MIE coarse
MIFTIMES=            103265320 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32270605 / Exposure Complete: MIE coarse
MIFTIMEC=            103265320 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32270605 / Readout Start: MIE coarse
MIFREADS=            103265320 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32270829 / Readout Complete: MIE coarse
MIFREADC=            103266038 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 178 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   89 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  136 / Observation number
IHDRCNT =                  104 / Number of headers currently in EDAC RAM
IIMGCNT =                  104 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20738368 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2184 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62356 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  118 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  118 / CS memory monitor #5
ICSMEM06=                  118 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  118 / CS memory monitor #9
ICSMEM10=                  118 / CS memory monitor #10
ICSMEM11=                  118 / CS memory monitor #11
ICSMEM12=                  118 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                  118 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 179 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   90 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36230 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32270380 / Exposure Start Time: MIE coarse
MIFTIMES=            103264602 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32270380 / Exposure Complete: MIE coarse
MIFTIMEC=            103264602 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32270380 / Readout Start: MIE coarse
MIFREADS=            103264602 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32270605 / Readout Complete: MIE coarse
MIFREADC=            103265320 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 180 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   90 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  135 / Observation number
IHDRCNT =                  103 / Number of headers currently in EDAC RAM
IIMGCNT =                  103 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20700280 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2163 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  104 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  104 / CS memory monitor #5
ICSMEM06=                  104 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  104 / CS memory monitor #9
ICSMEM10=                  104 / CS memory monitor #10
ICSMEM11=                  104 / CS memory monitor #11
ICSMEM12=                  104 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                  104 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 181 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   91 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36229 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32270156 / Exposure Start Time: MIE coarse
MIFTIMES=            103263884 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32270156 / Exposure Complete: MIE coarse
MIFTIMEC=            103263884 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32270156 / Readout Start: MIE coarse
MIFREADS=            103263884 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32270380 / Readout Complete: MIE coarse
MIFREADC=            103264602 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 182 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   91 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  134 / Observation number
IHDRCNT =                  102 / Number of headers currently in EDAC RAM
IIMGCNT =                  102 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20662192 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2142 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.64302 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   90 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   90 / CS memory monitor #5
ICSMEM06=                   90 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   90 / CS memory monitor #9
ICSMEM10=                   90 / CS memory monitor #10
ICSMEM11=                   90 / CS memory monitor #11
ICSMEM12=                   90 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                   90 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 183 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   92 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36228 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32269932 / Exposure Start Time: MIE coarse
MIFTIMES=            103263166 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32269932 / Exposure Complete: MIE coarse
MIFTIMEC=            103263166 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32269932 / Readout Start: MIE coarse
MIFREADS=            103263166 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32270156 / Readout Complete: MIE coarse
MIFREADC=            103263884 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 184 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   92 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  133 / Observation number
IHDRCNT =                  101 / Number of headers currently in EDAC RAM
IIMGCNT =                  101 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20624104 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2121 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.63815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   75 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   75 / CS memory monitor #5
ICSMEM06=                   75 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   75 / CS memory monitor #9
ICSMEM10=                   75 / CS memory monitor #10
ICSMEM11=                   75 / CS memory monitor #11
ICSMEM12=                   75 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                   75 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 185 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   93 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36227 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32269707 / Exposure Start Time: MIE coarse
MIFTIMES=            103262447 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32269707 / Exposure Complete: MIE coarse
MIFTIMEC=            103262448 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32269707 / Readout Start: MIE coarse
MIFREADS=            103262448 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32269931 / Readout Complete: MIE coarse
MIFREADC=            103263166 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 186 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   93 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  132 / Observation number
IHDRCNT =                  100 / Number of headers currently in EDAC RAM
IIMGCNT =                  100 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20586016 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2100 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =              18.5206 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   61 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   61 / CS memory monitor #5
ICSMEM06=                   61 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   61 / CS memory monitor #9
ICSMEM10=                   61 / CS memory monitor #10
ICSMEM11=                   61 / CS memory monitor #11
ICSMEM12=                   61 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                   61 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 187 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   94 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36226 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32269483 / Exposure Start Time: MIE coarse
MIFTIMES=            103261729 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32269483 / Exposure Complete: MIE coarse
MIFTIMEC=            103261730 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32269483 / Readout Start: MIE coarse
MIFREADS=            103261730 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32269707 / Readout Complete: MIE coarse
MIFREADC=            103262447 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 188 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   94 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  131 / Observation number
IHDRCNT =                   99 / Number of headers currently in EDAC RAM
IIMGCNT =                   99 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20547928 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2079 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.60896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 189 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   95 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36225 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32269479 / Exposure Start Time: MIE coarse
MIFTIMES=            103261718 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32269479 / Exposure Complete: MIE coarse
MIFTIMEC=            103261718 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32269479 / Readout Start: MIE coarse
MIFREADS=            103261718 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32269483 / Readout Complete: MIE coarse
MIFREADC=            103261729 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 190 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   95 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  130 / Observation number
IHDRCNT =                   98 / Number of headers currently in EDAC RAM
IIMGCNT =                   98 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20509840 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2058 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                40230 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.60896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  240 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 191 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   96 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36224 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32269293 / Exposure Start Time: MIE coarse
MIFTIMES=            103261121 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32269293 / Exposure Complete: MIE coarse
MIFTIMEC=            103261122 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32269293 / Readout Start: MIE coarse
MIFREADS=            103261122 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32269479 / Readout Complete: MIE coarse
MIFREADC=            103261718 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 192 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   96 / extension version number
ROOTNAME= 'ibh719grq                         ' / rootname of the observation set
EXPNAME = 'ibh719grq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  129 / Observation number
IHDRCNT =                   97 / Number of headers currently in EDAC RAM
IIMGCNT =                   97 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             20471752 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2037 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3269 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -31.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -34.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.63329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.36807 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  242 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  239 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  224 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29389 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 193 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   97 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36255 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32276119 / Exposure Start Time: MIE coarse
MIFTIMES=            103282965 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32276119 / Exposure Complete: MIE coarse
MIFTIMEC=            103282965 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32276119 / Readout Start: MIE coarse
MIFREADS=            103282965 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32276343 / Readout Complete: MIE coarse
MIFREADC=            103283683 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 194 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   97 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  160 / Observation number
IHDRCNT =                  128 / Number of headers currently in EDAC RAM
IIMGCNT =                  128 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21652480 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2688 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.63815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.75726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  111 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  111 / CS memory monitor #5
ICSMEM06=                  111 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  111 / CS memory monitor #9
ICSMEM10=                  111 / CS memory monitor #10
ICSMEM11=                  111 / CS memory monitor #11
ICSMEM12=                  111 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                  111 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 195 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   98 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36254 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32275894 / Exposure Start Time: MIE coarse
MIFTIMES=            103282247 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32275895 / Exposure Complete: MIE coarse
MIFTIMEC=            103282247 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32275895 / Readout Start: MIE coarse
MIFREADS=            103282247 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32276119 / Readout Complete: MIE coarse
MIFREADC=            103282965 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 196 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   98 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  159 / Observation number
IHDRCNT =                  127 / Number of headers currently in EDAC RAM
IIMGCNT =                  127 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21614392 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2667 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.73781 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   97 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   97 / CS memory monitor #5
ICSMEM06=                   97 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   97 / CS memory monitor #9
ICSMEM10=                   97 / CS memory monitor #10
ICSMEM11=                   97 / CS memory monitor #11
ICSMEM12=                   97 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   97 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 197 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                   99 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36253 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32275670 / Exposure Start Time: MIE coarse
MIFTIMES=            103281529 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32275670 / Exposure Complete: MIE coarse
MIFTIMEC=            103281529 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32275670 / Readout Start: MIE coarse
MIFREADS=            103281529 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32275894 / Readout Complete: MIE coarse
MIFREADC=            103282247 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 198 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                   99 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  158 / Observation number
IHDRCNT =                  126 / Number of headers currently in EDAC RAM
IIMGCNT =                  126 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21576304 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2646 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.63815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.74753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   82 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   82 / CS memory monitor #5
ICSMEM06=                   82 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   82 / CS memory monitor #9
ICSMEM10=                   82 / CS memory monitor #10
ICSMEM11=                   82 / CS memory monitor #11
ICSMEM12=                   82 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   82 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 199 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  100 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36252 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32275446 / Exposure Start Time: MIE coarse
MIFTIMES=            103280811 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32275446 / Exposure Complete: MIE coarse
MIFTIMEC=            103280811 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32275446 / Readout Start: MIE coarse
MIFREADS=            103280811 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32275670 / Readout Complete: MIE coarse
MIFREADC=            103281529 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 200 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  100 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  157 / Observation number
IHDRCNT =                  125 / Number of headers currently in EDAC RAM
IIMGCNT =                  125 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21538216 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2625 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.63329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.73781 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   68 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   68 / CS memory monitor #5
ICSMEM06=                   68 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   68 / CS memory monitor #9
ICSMEM10=                   68 / CS memory monitor #10
ICSMEM11=                   68 / CS memory monitor #11
ICSMEM12=                   68 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   68 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 201 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  101 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36251 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32275221 / Exposure Start Time: MIE coarse
MIFTIMES=            103280092 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32275221 / Exposure Complete: MIE coarse
MIFTIMEC=            103280093 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32275221 / Readout Start: MIE coarse
MIFREADS=            103280093 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32275446 / Readout Complete: MIE coarse
MIFREADC=            103280811 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 202 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  101 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  156 / Observation number
IHDRCNT =                  124 / Number of headers currently in EDAC RAM
IIMGCNT =                  124 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21500128 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2604 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -30.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.72808 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 203 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  102 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36250 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32274997 / Exposure Start Time: MIE coarse
MIFTIMES=            103279374 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32274997 / Exposure Complete: MIE coarse
MIFTIMEC=            103279375 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32274997 / Readout Start: MIE coarse
MIFREADS=            103279375 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32275221 / Readout Complete: MIE coarse
MIFREADC=            103280092 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 204 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  102 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  155 / Observation number
IHDRCNT =                  123 / Number of headers currently in EDAC RAM
IIMGCNT =                  123 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21462040 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2583 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                  5.9 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.65275 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.72808 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   39 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   39 / CS memory monitor #5
ICSMEM06=                   39 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   39 / CS memory monitor #9
ICSMEM10=                   39 / CS memory monitor #10
ICSMEM11=                   39 / CS memory monitor #11
ICSMEM12=                   39 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   39 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 205 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  103 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36249 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32274772 / Exposure Start Time: MIE coarse
MIFTIMES=            103278656 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32274773 / Exposure Complete: MIE coarse
MIFTIMEC=            103278657 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32274773 / Readout Start: MIE coarse
MIFREADS=            103278657 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32274997 / Readout Complete: MIE coarse
MIFREADC=            103279374 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 206 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  103 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  154 / Observation number
IHDRCNT =                  122 / Number of headers currently in EDAC RAM
IIMGCNT =                  122 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21423952 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2562 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62356 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.69889 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   25 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   25 / CS memory monitor #5
ICSMEM06=                   25 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   25 / CS memory monitor #9
ICSMEM10=                   25 / CS memory monitor #10
ICSMEM11=                   25 / CS memory monitor #11
ICSMEM12=                   25 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   25 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 207 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  104 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36248 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32274548 / Exposure Start Time: MIE coarse
MIFTIMES=            103277938 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32274548 / Exposure Complete: MIE coarse
MIFTIMEC=            103277938 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32274548 / Readout Start: MIE coarse
MIFREADS=            103277938 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32274772 / Readout Complete: MIE coarse
MIFREADC=            103278656 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 208 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  104 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  153 / Observation number
IHDRCNT =                  121 / Number of headers currently in EDAC RAM
IIMGCNT =                  121 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21385864 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2541 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -30.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.61869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.69889 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   11 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   11 / CS memory monitor #5
ICSMEM06=                   11 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   11 / CS memory monitor #9
ICSMEM10=                   11 / CS memory monitor #10
ICSMEM11=                   11 / CS memory monitor #11
ICSMEM12=                   11 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29392 / Major frame count
IMINFCNT=                   11 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 209 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  105 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36247 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32274324 / Exposure Start Time: MIE coarse
MIFTIMES=            103277220 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32274324 / Exposure Complete: MIE coarse
MIFTIMEC=            103277220 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32274324 / Readout Start: MIE coarse
MIFREADS=            103277220 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32274548 / Readout Complete: MIE coarse
MIFREADC=            103277938 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 210 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  105 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  152 / Observation number
IHDRCNT =                  120 / Number of headers currently in EDAC RAM
IIMGCNT =                  120 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21347776 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2520 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -30.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.64788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.69889 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  116 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  116 / CS memory monitor #5
ICSMEM06=                  116 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  116 / CS memory monitor #9
ICSMEM10=                  116 / CS memory monitor #10
ICSMEM11=                  116 / CS memory monitor #11
ICSMEM12=                  116 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                  116 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 211 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  106 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36246 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32274099 / Exposure Start Time: MIE coarse
MIFTIMES=            103276502 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32274099 / Exposure Complete: MIE coarse
MIFTIMEC=            103276502 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32274099 / Readout Start: MIE coarse
MIFREADS=            103276502 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32274323 / Readout Complete: MIE coarse
MIFREADC=            103277220 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 212 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  106 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  151 / Observation number
IHDRCNT =                  119 / Number of headers currently in EDAC RAM
IIMGCNT =                  119 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21309688 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2499 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.63329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.65997 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  102 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  102 / CS memory monitor #5
ICSMEM06=                  102 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  102 / CS memory monitor #9
ICSMEM10=                  102 / CS memory monitor #10
ICSMEM11=                  102 / CS memory monitor #11
ICSMEM12=                  102 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                  102 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 213 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  107 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36245 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32273875 / Exposure Start Time: MIE coarse
MIFTIMES=            103275784 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32273875 / Exposure Complete: MIE coarse
MIFTIMEC=            103275784 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32273875 / Readout Start: MIE coarse
MIFREADS=            103275784 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32274099 / Readout Complete: MIE coarse
MIFREADC=            103276502 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 214 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  107 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  150 / Observation number
IHDRCNT =                  118 / Number of headers currently in EDAC RAM
IIMGCNT =                  118 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21271600 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2478 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.61717 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.61869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.65997 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   88 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   88 / CS memory monitor #5
ICSMEM06=                   88 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   88 / CS memory monitor #9
ICSMEM10=                   88 / CS memory monitor #10
ICSMEM11=                   88 / CS memory monitor #11
ICSMEM12=                   88 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                   88 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 215 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  108 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36244 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32273650 / Exposure Start Time: MIE coarse
MIFTIMES=            103275066 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32273650 / Exposure Complete: MIE coarse
MIFTIMEC=            103275066 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32273650 / Readout Start: MIE coarse
MIFREADS=            103275066 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32273875 / Readout Complete: MIE coarse
MIFREADC=            103275784 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 216 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  108 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  149 / Observation number
IHDRCNT =                  117 / Number of headers currently in EDAC RAM
IIMGCNT =                  117 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21233512 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2457 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40275 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.65275 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.5724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   73 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   73 / CS memory monitor #5
ICSMEM06=                   73 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   73 / CS memory monitor #9
ICSMEM10=                   73 / CS memory monitor #10
ICSMEM11=                   73 / CS memory monitor #11
ICSMEM12=                   73 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                   73 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 217 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  109 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36243 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32273426 / Exposure Start Time: MIE coarse
MIFTIMES=            103274347 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32273426 / Exposure Complete: MIE coarse
MIFTIMEC=            103274348 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32273426 / Readout Start: MIE coarse
MIFREADS=            103274348 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32273650 / Readout Complete: MIE coarse
MIFREADC=            103275065 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 218 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  109 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  148 / Observation number
IHDRCNT =                  116 / Number of headers currently in EDAC RAM
IIMGCNT =                  116 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21195424 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2436 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40274 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -30.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.5724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   59 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   59 / CS memory monitor #5
ICSMEM06=                   59 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   59 / CS memory monitor #9
ICSMEM10=                   59 / CS memory monitor #10
ICSMEM11=                   59 / CS memory monitor #11
ICSMEM12=                   59 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                   59 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 219 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  110 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36242 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32273201 / Exposure Start Time: MIE coarse
MIFTIMES=            103273629 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32273202 / Exposure Complete: MIE coarse
MIFTIMEC=            103273630 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32273202 / Readout Start: MIE coarse
MIFREADS=            103273630 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32273426 / Readout Complete: MIE coarse
MIFREADC=            103274347 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 220 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  110 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  147 / Observation number
IHDRCNT =                  115 / Number of headers currently in EDAC RAM
IIMGCNT =                  115 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21157336 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2415 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.64788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.58213 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 221 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  111 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36241 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32273198 / Exposure Start Time: MIE coarse
MIFTIMES=            103273618 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32273198 / Exposure Complete: MIE coarse
MIFTIMEC=            103273618 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32273198 / Readout Start: MIE coarse
MIFREADS=            103273618 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32273201 / Readout Complete: MIE coarse
MIFREADC=            103273629 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 222 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  111 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  146 / Observation number
IHDRCNT =                  114 / Number of headers currently in EDAC RAM
IIMGCNT =                  114 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21119248 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2394 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                40235 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.60896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.54321 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  242 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 223 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  112 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36240 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32273011 / Exposure Start Time: MIE coarse
MIFTIMES=            103273021 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32273012 / Exposure Complete: MIE coarse
MIFTIMEC=            103273022 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32273012 / Readout Start: MIE coarse
MIFREADS=            103273022 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32273198 / Readout Complete: MIE coarse
MIFREADC=            103273618 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 224 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  112 / extension version number
ROOTNAME= 'ibh719gsq                         ' / rootname of the observation set
EXPNAME = 'ibh719gsq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  145 / Observation number
IHDRCNT =                  113 / Number of headers currently in EDAC RAM
IIMGCNT =                  113 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21081160 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2373 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3270 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2235 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.64788 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.4751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  244 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  241 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  230 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29391 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 225 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  113 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36271 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32279838 / Exposure Start Time: MIE coarse
MIFTIMES=            103294865 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32279838 / Exposure Complete: MIE coarse
MIFTIMEC=            103294865 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32279838 / Readout Start: MIE coarse
MIFREADS=            103294865 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32280062 / Readout Complete: MIE coarse
MIFREADC=            103295583 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 226 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  113 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  176 / Observation number
IHDRCNT =                  144 / Number of headers currently in EDAC RAM
IIMGCNT =                  144 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22261888 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3024 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.53905 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.61869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.68916 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  109 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  109 / CS memory monitor #5
ICSMEM06=                  109 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  109 / CS memory monitor #9
ICSMEM10=                  109 / CS memory monitor #10
ICSMEM11=                  109 / CS memory monitor #11
ICSMEM12=                  109 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                  109 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 227 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  114 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36270 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32279613 / Exposure Start Time: MIE coarse
MIFTIMES=            103294147 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32279613 / Exposure Complete: MIE coarse
MIFTIMEC=            103294147 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32279613 / Readout Start: MIE coarse
MIFREADS=            103294147 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32279838 / Readout Complete: MIE coarse
MIFREADC=            103294865 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 228 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  114 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  175 / Observation number
IHDRCNT =                  143 / Number of headers currently in EDAC RAM
IIMGCNT =                  143 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22223800 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3003 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40267 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.60896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.69889 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   95 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   95 / CS memory monitor #5
ICSMEM06=                   95 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   95 / CS memory monitor #9
ICSMEM10=                   95 / CS memory monitor #10
ICSMEM11=                   95 / CS memory monitor #11
ICSMEM12=                   95 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                   95 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 229 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  115 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36269 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32279389 / Exposure Start Time: MIE coarse
MIFTIMES=            103293429 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32279389 / Exposure Complete: MIE coarse
MIFTIMEC=            103293429 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32279389 / Readout Start: MIE coarse
MIFREADS=            103293429 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32279613 / Readout Complete: MIE coarse
MIFREADC=            103294147 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 230 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  115 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  174 / Observation number
IHDRCNT =                  142 / Number of headers currently in EDAC RAM
IIMGCNT =                  142 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22185712 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2982 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.63815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.73781 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 231 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  116 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36268 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32279164 / Exposure Start Time: MIE coarse
MIFTIMES=            103292711 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32279165 / Exposure Complete: MIE coarse
MIFTIMEC=            103292711 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32279165 / Readout Start: MIE coarse
MIFREADS=            103292711 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32279389 / Readout Complete: MIE coarse
MIFREADC=            103293429 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 232 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  116 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  173 / Observation number
IHDRCNT =                  141 / Number of headers currently in EDAC RAM
IIMGCNT =                  141 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22147624 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2961 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.70862 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 233 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  117 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36267 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32278940 / Exposure Start Time: MIE coarse
MIFTIMES=            103291992 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32278940 / Exposure Complete: MIE coarse
MIFTIMEC=            103291993 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32278940 / Readout Start: MIE coarse
MIFREADS=            103291993 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32279164 / Readout Complete: MIE coarse
MIFREADC=            103292711 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 234 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  117 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  172 / Observation number
IHDRCNT =                  140 / Number of headers currently in EDAC RAM
IIMGCNT =                  140 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22109536 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2940 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.72808 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 235 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  118 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36266 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32278716 / Exposure Start Time: MIE coarse
MIFTIMES=            103291274 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32278716 / Exposure Complete: MIE coarse
MIFTIMEC=            103291275 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32278716 / Readout Start: MIE coarse
MIFREADS=            103291275 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32278940 / Readout Complete: MIE coarse
MIFREADC=            103291992 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 236 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  118 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  171 / Observation number
IHDRCNT =                  139 / Number of headers currently in EDAC RAM
IIMGCNT =                  139 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22071448 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2919 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.59923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.70862 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   37 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   37 / CS memory monitor #5
ICSMEM06=                   37 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   37 / CS memory monitor #9
ICSMEM10=                   37 / CS memory monitor #10
ICSMEM11=                   37 / CS memory monitor #11
ICSMEM12=                   37 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                   37 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 237 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  119 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36265 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32278491 / Exposure Start Time: MIE coarse
MIFTIMES=            103290556 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32278491 / Exposure Complete: MIE coarse
MIFTIMEC=            103290557 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32278491 / Readout Start: MIE coarse
MIFREADS=            103290557 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32278716 / Readout Complete: MIE coarse
MIFREADC=            103291274 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 238 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  119 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  170 / Observation number
IHDRCNT =                  138 / Number of headers currently in EDAC RAM
IIMGCNT =                  138 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22033360 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2898 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.53905 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.62356 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.71835 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   23 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   23 / CS memory monitor #5
ICSMEM06=                   23 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   23 / CS memory monitor #9
ICSMEM10=                   23 / CS memory monitor #10
ICSMEM11=                   23 / CS memory monitor #11
ICSMEM12=                   23 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                   23 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 239 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  120 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36264 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32278267 / Exposure Start Time: MIE coarse
MIFTIMES=            103289838 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32278267 / Exposure Complete: MIE coarse
MIFTIMEC=            103289838 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32278267 / Readout Start: MIE coarse
MIFREADS=            103289838 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32278491 / Readout Complete: MIE coarse
MIFREADC=            103290556 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 240 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  120 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  169 / Observation number
IHDRCNT =                  137 / Number of headers currently in EDAC RAM
IIMGCNT =                  137 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21995272 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2877 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.76556 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.71835 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    9 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    9 / CS memory monitor #5
ICSMEM06=                    9 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    9 / CS memory monitor #9
ICSMEM10=                    9 / CS memory monitor #10
ICSMEM11=                    9 / CS memory monitor #11
ICSMEM12=                    9 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29394 / Major frame count
IMINFCNT=                    9 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 241 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  121 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36263 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32278042 / Exposure Start Time: MIE coarse
MIFTIMES=            103289120 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32278042 / Exposure Complete: MIE coarse
MIFTIMEC=            103289120 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32278042 / Readout Start: MIE coarse
MIFREADS=            103289120 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32278267 / Readout Complete: MIE coarse
MIFREADC=            103289838 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 242 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  121 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  168 / Observation number
IHDRCNT =                  136 / Number of headers currently in EDAC RAM
IIMGCNT =                  136 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21957184 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2856 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.71835 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  114 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  114 / CS memory monitor #5
ICSMEM06=                  114 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  114 / CS memory monitor #9
ICSMEM10=                  114 / CS memory monitor #10
ICSMEM11=                  114 / CS memory monitor #11
ICSMEM12=                  114 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                  114 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 243 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  122 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36262 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32277818 / Exposure Start Time: MIE coarse
MIFTIMES=            103288402 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32277818 / Exposure Complete: MIE coarse
MIFTIMEC=            103288402 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32277818 / Readout Start: MIE coarse
MIFREADS=            103288402 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32278042 / Readout Complete: MIE coarse
MIFREADC=            103289120 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 244 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  122 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  167 / Observation number
IHDRCNT =                  135 / Number of headers currently in EDAC RAM
IIMGCNT =                  135 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21919096 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2835 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.59437 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.71835 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  100 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  100 / CS memory monitor #5
ICSMEM06=                  100 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  100 / CS memory monitor #9
ICSMEM10=                  100 / CS memory monitor #10
ICSMEM11=                  100 / CS memory monitor #11
ICSMEM12=                  100 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                  100 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 245 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  123 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36261 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32277593 / Exposure Start Time: MIE coarse
MIFTIMES=            103287684 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32277594 / Exposure Complete: MIE coarse
MIFTIMEC=            103287684 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32277594 / Readout Start: MIE coarse
MIFREADS=            103287684 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32277818 / Readout Complete: MIE coarse
MIFREADC=            103288402 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 246 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  123 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  166 / Observation number
IHDRCNT =                  134 / Number of headers currently in EDAC RAM
IIMGCNT =                  134 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21881008 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2814 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.60896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.71835 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   86 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   86 / CS memory monitor #5
ICSMEM06=                   86 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   86 / CS memory monitor #9
ICSMEM10=                   86 / CS memory monitor #10
ICSMEM11=                   86 / CS memory monitor #11
ICSMEM12=                   86 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                   86 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 247 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  124 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36260 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32277369 / Exposure Start Time: MIE coarse
MIFTIMES=            103286965 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32277369 / Exposure Complete: MIE coarse
MIFTIMEC=            103286966 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32277369 / Readout Start: MIE coarse
MIFREADS=            103286966 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32277593 / Readout Complete: MIE coarse
MIFREADC=            103287684 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 248 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  124 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  165 / Observation number
IHDRCNT =                  133 / Number of headers currently in EDAC RAM
IIMGCNT =                  133 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21842920 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2793 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40267 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =               17.591 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.62356 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.70862 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   71 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   71 / CS memory monitor #5
ICSMEM06=                   71 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   71 / CS memory monitor #9
ICSMEM10=                   71 / CS memory monitor #10
ICSMEM11=                   71 / CS memory monitor #11
ICSMEM12=                   71 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                   71 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 249 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  125 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36259 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32277145 / Exposure Start Time: MIE coarse
MIFTIMES=            103286247 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32277145 / Exposure Complete: MIE coarse
MIFTIMEC=            103286248 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32277145 / Readout Start: MIE coarse
MIFREADS=            103286248 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32277369 / Readout Complete: MIE coarse
MIFREADC=            103286965 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 250 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  125 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  164 / Observation number
IHDRCNT =                  132 / Number of headers currently in EDAC RAM
IIMGCNT =                  132 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21804832 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2772 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40267 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.62842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.72808 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   57 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   57 / CS memory monitor #5
ICSMEM06=                   57 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   57 / CS memory monitor #9
ICSMEM10=                   57 / CS memory monitor #10
ICSMEM11=                   57 / CS memory monitor #11
ICSMEM12=                   57 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                   57 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 251 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  126 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36258 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32276920 / Exposure Start Time: MIE coarse
MIFTIMES=            103285529 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32276920 / Exposure Complete: MIE coarse
MIFTIMEC=            103285530 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32276920 / Readout Start: MIE coarse
MIFREADS=            103285530 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32277145 / Readout Complete: MIE coarse
MIFREADC=            103286247 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 252 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  126 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  163 / Observation number
IHDRCNT =                  131 / Number of headers currently in EDAC RAM
IIMGCNT =                  131 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21766744 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2751 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.64788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.74753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 253 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  127 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36257 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32276917 / Exposure Start Time: MIE coarse
MIFTIMES=            103285518 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32276917 / Exposure Complete: MIE coarse
MIFTIMEC=            103285518 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32276917 / Readout Start: MIE coarse
MIFREADS=            103285518 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32276920 / Readout Complete: MIE coarse
MIFREADC=            103285529 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 254 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  127 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  162 / Observation number
IHDRCNT =                  130 / Number of headers currently in EDAC RAM
IIMGCNT =                  130 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21728656 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2730 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                40226 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.64788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.74753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  244 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 255 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  128 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36256 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32276730 / Exposure Start Time: MIE coarse
MIFTIMES=            103284921 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32276730 / Exposure Complete: MIE coarse
MIFTIMEC=            103284922 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32276730 / Readout Start: MIE coarse
MIFREADS=            103284922 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32276917 / Readout Complete: MIE coarse
MIFREADC=            103285518 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 256 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  128 / extension version number
ROOTNAME= 'ibh719gtq                         ' / rootname of the observation set
EXPNAME = 'ibh719gtq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  161 / Observation number
IHDRCNT =                  129 / Number of headers currently in EDAC RAM
IIMGCNT =                  129 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             21690568 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2709 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3271 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -32.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.59437 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.74753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  246 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  243 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  236 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29393 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 257 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  129 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36287 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32283556 / Exposure Start Time: MIE coarse
MIFTIMES=            103306765 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32283557 / Exposure Complete: MIE coarse
MIFTIMEC=            103306765 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32283557 / Readout Start: MIE coarse
MIFREADS=            103306765 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32283781 / Readout Complete: MIE coarse
MIFREADC=            103307483 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 258 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  129 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  192 / Observation number
IHDRCNT =                  160 / Number of headers currently in EDAC RAM
IIMGCNT =                  160 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22871296 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3360 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.60159 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  107 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  107 / CS memory monitor #5
ICSMEM06=                  107 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  107 / CS memory monitor #9
ICSMEM10=                  107 / CS memory monitor #10
ICSMEM11=                  107 / CS memory monitor #11
ICSMEM12=                  107 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                  107 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 259 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  130 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36286 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32283332 / Exposure Start Time: MIE coarse
MIFTIMES=            103306047 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32283332 / Exposure Complete: MIE coarse
MIFTIMEC=            103306047 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32283332 / Readout Start: MIE coarse
MIFREADS=            103306047 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32283556 / Readout Complete: MIE coarse
MIFREADC=            103306765 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 260 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  130 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  191 / Observation number
IHDRCNT =                  159 / Number of headers currently in EDAC RAM
IIMGCNT =                  159 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22833208 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3339 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.55545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.61132 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   93 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   93 / CS memory monitor #5
ICSMEM06=                   93 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   93 / CS memory monitor #9
ICSMEM10=                   93 / CS memory monitor #10
ICSMEM11=                   93 / CS memory monitor #11
ICSMEM12=                   93 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                   93 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 261 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  131 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36285 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32283108 / Exposure Start Time: MIE coarse
MIFTIMES=            103305329 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32283108 / Exposure Complete: MIE coarse
MIFTIMEC=            103305329 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32283108 / Readout Start: MIE coarse
MIFREADS=            103305329 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32283332 / Readout Complete: MIE coarse
MIFREADC=            103306047 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 262 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  131 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  190 / Observation number
IHDRCNT =                  158 / Number of headers currently in EDAC RAM
IIMGCNT =                  158 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22795120 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3318 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.59923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.62105 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 263 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  132 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36284 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32282883 / Exposure Start Time: MIE coarse
MIFTIMES=            103304610 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32282883 / Exposure Complete: MIE coarse
MIFTIMEC=            103304611 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32282883 / Readout Start: MIE coarse
MIFREADS=            103304611 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32283108 / Readout Complete: MIE coarse
MIFREADC=            103305329 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 264 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  132 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  189 / Observation number
IHDRCNT =                  157 / Number of headers currently in EDAC RAM
IIMGCNT =                  157 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22757032 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3297 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.58464 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.62105 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 265 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  133 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36283 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32282659 / Exposure Start Time: MIE coarse
MIFTIMES=            103303892 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32282659 / Exposure Complete: MIE coarse
MIFTIMEC=            103303893 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32282659 / Readout Start: MIE coarse
MIFREADS=            103303893 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32282883 / Readout Complete: MIE coarse
MIFREADC=            103304610 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 266 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  133 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  188 / Observation number
IHDRCNT =                  156 / Number of headers currently in EDAC RAM
IIMGCNT =                  156 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22718944 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3276 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =              -7.6953 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.65024 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 267 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  134 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36282 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32282434 / Exposure Start Time: MIE coarse
MIFTIMES=            103303174 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32282434 / Exposure Complete: MIE coarse
MIFTIMEC=            103303175 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32282434 / Readout Start: MIE coarse
MIFREADS=            103303175 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32282659 / Readout Complete: MIE coarse
MIFREADC=            103303892 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 268 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  134 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  187 / Observation number
IHDRCNT =                  155 / Number of headers currently in EDAC RAM
IIMGCNT =                  155 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22680856 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3255 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.58464 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.63078 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   35 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   35 / CS memory monitor #5
ICSMEM06=                   35 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   35 / CS memory monitor #9
ICSMEM10=                   35 / CS memory monitor #10
ICSMEM11=                   35 / CS memory monitor #11
ICSMEM12=                   35 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                   35 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 269 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  135 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36281 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32282210 / Exposure Start Time: MIE coarse
MIFTIMES=            103302456 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32282210 / Exposure Complete: MIE coarse
MIFTIMEC=            103302457 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32282210 / Readout Start: MIE coarse
MIFREADS=            103302457 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32282434 / Readout Complete: MIE coarse
MIFREADC=            103303174 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 270 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  135 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  186 / Observation number
IHDRCNT =                  154 / Number of headers currently in EDAC RAM
IIMGCNT =                  154 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22642768 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3234 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.65997 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   21 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   21 / CS memory monitor #5
ICSMEM06=                   21 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   21 / CS memory monitor #9
ICSMEM10=                   21 / CS memory monitor #10
ICSMEM11=                   21 / CS memory monitor #11
ICSMEM12=                   21 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                   21 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 271 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  136 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36280 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32281985 / Exposure Start Time: MIE coarse
MIFTIMES=            103301738 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32281986 / Exposure Complete: MIE coarse
MIFTIMEC=            103301738 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32281986 / Readout Start: MIE coarse
MIFREADS=            103301738 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32282210 / Readout Complete: MIE coarse
MIFREADC=            103302456 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 272 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  136 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  185 / Observation number
IHDRCNT =                  153 / Number of headers currently in EDAC RAM
IIMGCNT =                  153 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22604680 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3213 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.57977 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.6697 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    7 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    7 / CS memory monitor #5
ICSMEM06=                    7 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    7 / CS memory monitor #9
ICSMEM10=                    7 / CS memory monitor #10
ICSMEM11=                    7 / CS memory monitor #11
ICSMEM12=                    7 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29396 / Major frame count
IMINFCNT=                    7 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 273 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  137 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36279 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32281761 / Exposure Start Time: MIE coarse
MIFTIMES=            103301020 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32281761 / Exposure Complete: MIE coarse
MIFTIMEC=            103301020 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32281761 / Readout Start: MIE coarse
MIFREADS=            103301020 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32281985 / Readout Complete: MIE coarse
MIFREADC=            103301738 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 274 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  137 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  184 / Observation number
IHDRCNT =                  152 / Number of headers currently in EDAC RAM
IIMGCNT =                  152 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22566592 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3192 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.64051 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  112 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  112 / CS memory monitor #5
ICSMEM06=                  112 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  112 / CS memory monitor #9
ICSMEM10=                  112 / CS memory monitor #10
ICSMEM11=                  112 / CS memory monitor #11
ICSMEM12=                  112 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                  112 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 275 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  138 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36278 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32281537 / Exposure Start Time: MIE coarse
MIFTIMES=            103300302 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32281537 / Exposure Complete: MIE coarse
MIFTIMEC=            103300302 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32281537 / Readout Start: MIE coarse
MIFREADS=            103300302 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32281761 / Readout Complete: MIE coarse
MIFREADC=            103301020 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 276 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  138 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  183 / Observation number
IHDRCNT =                  151 / Number of headers currently in EDAC RAM
IIMGCNT =                  151 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22528504 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3171 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.68916 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   98 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   98 / CS memory monitor #5
ICSMEM06=                   98 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   98 / CS memory monitor #9
ICSMEM10=                   98 / CS memory monitor #10
ICSMEM11=                   98 / CS memory monitor #11
ICSMEM12=                   98 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   98 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 277 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  139 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36277 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32281312 / Exposure Start Time: MIE coarse
MIFTIMES=            103299584 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32281312 / Exposure Complete: MIE coarse
MIFTIMEC=            103299584 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32281312 / Readout Start: MIE coarse
MIFREADS=            103299584 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32281537 / Readout Complete: MIE coarse
MIFREADC=            103300302 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 278 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  139 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  182 / Observation number
IHDRCNT =                  150 / Number of headers currently in EDAC RAM
IIMGCNT =                  150 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22490416 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3150 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.67943 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 279 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  140 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36276 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32281088 / Exposure Start Time: MIE coarse
MIFTIMES=            103298865 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32281088 / Exposure Complete: MIE coarse
MIFTIMEC=            103298866 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32281088 / Readout Start: MIE coarse
MIFREADS=            103298866 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32281312 / Readout Complete: MIE coarse
MIFREADC=            103299584 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 280 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  140 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  181 / Observation number
IHDRCNT =                  149 / Number of headers currently in EDAC RAM
IIMGCNT =                  149 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22452328 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3129 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.59923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.69889 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   69 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   69 / CS memory monitor #5
ICSMEM06=                   69 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   69 / CS memory monitor #9
ICSMEM10=                   69 / CS memory monitor #10
ICSMEM11=                   69 / CS memory monitor #11
ICSMEM12=                   69 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   69 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 281 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  141 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36275 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32280863 / Exposure Start Time: MIE coarse
MIFTIMES=            103298147 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32280863 / Exposure Complete: MIE coarse
MIFTIMEC=            103298148 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32280863 / Readout Start: MIE coarse
MIFREADS=            103298148 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32281088 / Readout Complete: MIE coarse
MIFREADC=            103298865 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 282 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  141 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  180 / Observation number
IHDRCNT =                  148 / Number of headers currently in EDAC RAM
IIMGCNT =                  148 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22414240 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3108 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.6041 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.69889 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   55 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   55 / CS memory monitor #5
ICSMEM06=                   55 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   55 / CS memory monitor #9
ICSMEM10=                   55 / CS memory monitor #10
ICSMEM11=                   55 / CS memory monitor #11
ICSMEM12=                   55 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   55 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 283 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  142 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36274 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32280639 / Exposure Start Time: MIE coarse
MIFTIMES=            103297429 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32280639 / Exposure Complete: MIE coarse
MIFTIMEC=            103297430 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32280639 / Readout Start: MIE coarse
MIFREADS=            103297430 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32280863 / Readout Complete: MIE coarse
MIFREADC=            103298147 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 284 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  142 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  179 / Observation number
IHDRCNT =                  147 / Number of headers currently in EDAC RAM
IIMGCNT =                  147 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22376152 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3087 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.72808 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 285 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  143 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36273 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32280635 / Exposure Start Time: MIE coarse
MIFTIMES=            103297418 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32280636 / Exposure Complete: MIE coarse
MIFTIMEC=            103297418 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32280636 / Readout Start: MIE coarse
MIFREADS=            103297418 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32280639 / Readout Complete: MIE coarse
MIFREADC=            103297429 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 286 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  143 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  178 / Observation number
IHDRCNT =                  146 / Number of headers currently in EDAC RAM
IIMGCNT =                  146 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22338064 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3066 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                40206 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.58464 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.70862 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  246 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 287 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  144 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36272 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32280449 / Exposure Start Time: MIE coarse
MIFTIMES=            103296821 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32280449 / Exposure Complete: MIE coarse
MIFTIMEC=            103296822 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32280449 / Readout Start: MIE coarse
MIFREADS=            103296822 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32280635 / Readout Complete: MIE coarse
MIFREADC=            103297418 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 288 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  144 / extension version number
ROOTNAME= 'ibh719guq                         ' / rootname of the observation set
EXPNAME = 'ibh719guq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  177 / Observation number
IHDRCNT =                  145 / Number of headers currently in EDAC RAM
IIMGCNT =                  145 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22299976 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3045 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3272 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -28.5714 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -30.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -35 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =               16.243 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.59437 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.71835 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  248 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  245 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  242 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29395 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 289 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  145 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36303 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32287275 / Exposure Start Time: MIE coarse
MIFTIMES=            103318665 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32287275 / Exposure Complete: MIE coarse
MIFTIMEC=            103318665 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32287275 / Readout Start: MIE coarse
MIFREADS=            103318665 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32287500 / Readout Complete: MIE coarse
MIFREADC=            103319383 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 290 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  145 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  208 / Observation number
IHDRCNT =                  176 / Number of headers currently in EDAC RAM
IIMGCNT =                  176 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23480704 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3696 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.49748 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.53112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.51402 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  105 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  105 / CS memory monitor #5
ICSMEM06=                  105 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  105 / CS memory monitor #9
ICSMEM10=                  105 / CS memory monitor #10
ICSMEM11=                  105 / CS memory monitor #11
ICSMEM12=                  105 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                  105 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 291 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  146 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36302 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32287051 / Exposure Start Time: MIE coarse
MIFTIMES=            103317947 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32287051 / Exposure Complete: MIE coarse
MIFTIMEC=            103317947 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32287051 / Readout Start: MIE coarse
MIFREADS=            103317947 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32287275 / Readout Complete: MIE coarse
MIFREADC=            103318665 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 292 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  146 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  207 / Observation number
IHDRCNT =                  175 / Number of headers currently in EDAC RAM
IIMGCNT =                  175 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23442616 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3675 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               6.5068 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.52375 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   91 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   91 / CS memory monitor #5
ICSMEM06=                   91 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   91 / CS memory monitor #9
ICSMEM10=                   91 / CS memory monitor #10
ICSMEM11=                   91 / CS memory monitor #11
ICSMEM12=                   91 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                   91 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 293 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  147 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36301 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32286826 / Exposure Start Time: MIE coarse
MIFTIMES=            103317229 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32286826 / Exposure Complete: MIE coarse
MIFTIMEC=            103317229 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32286826 / Readout Start: MIE coarse
MIFREADS=            103317229 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32287051 / Readout Complete: MIE coarse
MIFREADC=            103317947 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 294 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  147 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  206 / Observation number
IHDRCNT =                  174 / Number of headers currently in EDAC RAM
IIMGCNT =                  174 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23404528 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3654 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.54572 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.54321 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 295 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  148 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36300 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32286602 / Exposure Start Time: MIE coarse
MIFTIMES=            103316510 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32286602 / Exposure Complete: MIE coarse
MIFTIMEC=            103316511 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32286602 / Readout Start: MIE coarse
MIFREADS=            103316511 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32286826 / Readout Complete: MIE coarse
MIFREADC=            103317229 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 296 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  148 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  205 / Observation number
IHDRCNT =                  173 / Number of headers currently in EDAC RAM
IIMGCNT =                  173 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23366440 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3633 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.53599 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.54321 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 297 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  149 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36299 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32286377 / Exposure Start Time: MIE coarse
MIFTIMES=            103315792 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32286378 / Exposure Complete: MIE coarse
MIFTIMEC=            103315793 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32286378 / Readout Start: MIE coarse
MIFREADS=            103315793 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32286602 / Readout Complete: MIE coarse
MIFREADC=            103316510 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 298 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  149 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  204 / Observation number
IHDRCNT =                  172 / Number of headers currently in EDAC RAM
IIMGCNT =                  172 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23328352 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3612 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.56031 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.54321 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 299 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  150 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36298 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32286153 / Exposure Start Time: MIE coarse
MIFTIMES=            103315074 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32286153 / Exposure Complete: MIE coarse
MIFTIMEC=            103315075 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32286153 / Readout Start: MIE coarse
MIFREADS=            103315075 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32286377 / Readout Complete: MIE coarse
MIFREADC=            103315792 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 300 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  150 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  203 / Observation number
IHDRCNT =                  171 / Number of headers currently in EDAC RAM
IIMGCNT =                  171 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23290264 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3591 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.55058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.56267 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   33 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   33 / CS memory monitor #5
ICSMEM06=                   33 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   33 / CS memory monitor #9
ICSMEM10=                   33 / CS memory monitor #10
ICSMEM11=                   33 / CS memory monitor #11
ICSMEM12=                   33 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                   33 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 301 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  151 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36297 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32285929 / Exposure Start Time: MIE coarse
MIFTIMES=            103314356 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32285929 / Exposure Complete: MIE coarse
MIFTIMEC=            103314356 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32285929 / Readout Start: MIE coarse
MIFREADS=            103314356 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32286153 / Readout Complete: MIE coarse
MIFREADC=            103315074 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 302 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  151 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  202 / Observation number
IHDRCNT =                  170 / Number of headers currently in EDAC RAM
IIMGCNT =                  170 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23252176 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3570 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =                  5.0 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.55058 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.5724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   19 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   19 / CS memory monitor #5
ICSMEM06=                   19 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   19 / CS memory monitor #9
ICSMEM10=                   19 / CS memory monitor #10
ICSMEM11=                   19 / CS memory monitor #11
ICSMEM12=                   19 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                   19 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 303 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  152 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36296 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32285704 / Exposure Start Time: MIE coarse
MIFTIMES=            103313638 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32285704 / Exposure Complete: MIE coarse
MIFTIMEC=            103313638 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32285704 / Readout Start: MIE coarse
MIFREADS=            103313638 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32285929 / Readout Complete: MIE coarse
MIFREADC=            103314356 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 304 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  152 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  201 / Observation number
IHDRCNT =                  169 / Number of headers currently in EDAC RAM
IIMGCNT =                  169 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23214088 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3549 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.61717 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6105 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.56031 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.58213 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    5 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    5 / CS memory monitor #5
ICSMEM06=                    5 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    5 / CS memory monitor #9
ICSMEM10=                    5 / CS memory monitor #10
ICSMEM11=                    5 / CS memory monitor #11
ICSMEM12=                    5 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29398 / Major frame count
IMINFCNT=                    5 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 305 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  153 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36295 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32285480 / Exposure Start Time: MIE coarse
MIFTIMES=            103312920 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32285480 / Exposure Complete: MIE coarse
MIFTIMEC=            103312920 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32285480 / Readout Start: MIE coarse
MIFREADS=            103312920 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32285704 / Readout Complete: MIE coarse
MIFREADC=            103313638 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 306 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  153 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  200 / Observation number
IHDRCNT =                  168 / Number of headers currently in EDAC RAM
IIMGCNT =                  168 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23176000 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3528 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.55545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.59186 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  110 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  110 / CS memory monitor #5
ICSMEM06=                  110 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  110 / CS memory monitor #9
ICSMEM10=                  110 / CS memory monitor #10
ICSMEM11=                  110 / CS memory monitor #11
ICSMEM12=                  110 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                  110 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 307 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  154 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36294 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32285255 / Exposure Start Time: MIE coarse
MIFTIMES=            103312202 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32285255 / Exposure Complete: MIE coarse
MIFTIMEC=            103312202 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32285255 / Readout Start: MIE coarse
MIFREADS=            103312202 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32285480 / Readout Complete: MIE coarse
MIFREADC=            103312920 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 308 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  154 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  199 / Observation number
IHDRCNT =                  167 / Number of headers currently in EDAC RAM
IIMGCNT =                  167 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23137912 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3507 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.54085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.60159 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   96 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   96 / CS memory monitor #5
ICSMEM06=                   96 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   96 / CS memory monitor #9
ICSMEM10=                   96 / CS memory monitor #10
ICSMEM11=                   96 / CS memory monitor #11
ICSMEM12=                   96 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   96 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 309 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  155 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36293 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32285031 / Exposure Start Time: MIE coarse
MIFTIMES=            103311483 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32285031 / Exposure Complete: MIE coarse
MIFTIMEC=            103311484 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32285031 / Readout Start: MIE coarse
MIFREADS=            103311484 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32285255 / Readout Complete: MIE coarse
MIFREADC=            103312201 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 310 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  155 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  198 / Observation number
IHDRCNT =                  166 / Number of headers currently in EDAC RAM
IIMGCNT =                  166 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23099824 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3486 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.60159 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   82 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   82 / CS memory monitor #5
ICSMEM06=                   82 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   82 / CS memory monitor #9
ICSMEM10=                   82 / CS memory monitor #10
ICSMEM11=                   82 / CS memory monitor #11
ICSMEM12=                   82 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   82 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 311 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  156 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36292 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32284807 / Exposure Start Time: MIE coarse
MIFTIMES=            103310765 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32284807 / Exposure Complete: MIE coarse
MIFTIMEC=            103310766 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32284807 / Readout Start: MIE coarse
MIFREADS=            103310766 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32285031 / Readout Complete: MIE coarse
MIFREADC=            103311483 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 312 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  156 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  197 / Observation number
IHDRCNT =                  165 / Number of headers currently in EDAC RAM
IIMGCNT =                  165 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23061736 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3465 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.54572 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.61132 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   67 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   67 / CS memory monitor #5
ICSMEM06=                   67 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   67 / CS memory monitor #9
ICSMEM10=                   67 / CS memory monitor #10
ICSMEM11=                   67 / CS memory monitor #11
ICSMEM12=                   67 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   67 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 313 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  157 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36291 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32284582 / Exposure Start Time: MIE coarse
MIFTIMES=            103310047 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32284582 / Exposure Complete: MIE coarse
MIFTIMEC=            103310048 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32284582 / Readout Start: MIE coarse
MIFREADS=            103310048 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32284806 / Readout Complete: MIE coarse
MIFREADC=            103310765 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 314 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  157 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  196 / Observation number
IHDRCNT =                  164 / Number of headers currently in EDAC RAM
IIMGCNT =                  164 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23023648 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3444 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.5895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.60159 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   53 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   53 / CS memory monitor #5
ICSMEM06=                   53 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   53 / CS memory monitor #9
ICSMEM10=                   53 / CS memory monitor #10
ICSMEM11=                   53 / CS memory monitor #11
ICSMEM12=                   53 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   53 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 315 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  158 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36290 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32284358 / Exposure Start Time: MIE coarse
MIFTIMES=            103309329 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32284358 / Exposure Complete: MIE coarse
MIFTIMEC=            103309329 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32284358 / Readout Start: MIE coarse
MIFREADS=            103309329 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32284582 / Readout Complete: MIE coarse
MIFREADC=            103310047 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 316 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  158 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  195 / Observation number
IHDRCNT =                  163 / Number of headers currently in EDAC RAM
IIMGCNT =                  163 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22985560 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3423 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.63078 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 317 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  159 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36289 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32284354 / Exposure Start Time: MIE coarse
MIFTIMES=            103309318 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32284354 / Exposure Complete: MIE coarse
MIFTIMEC=            103309318 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32284354 / Readout Start: MIE coarse
MIFREADS=            103309318 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32284358 / Readout Complete: MIE coarse
MIFREADC=            103309329 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 318 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  159 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  194 / Observation number
IHDRCNT =                  162 / Number of headers currently in EDAC RAM
IIMGCNT =                  162 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22947472 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3402 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                40216 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.57004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.63078 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  248 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 319 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  160 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36288 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32284168 / Exposure Start Time: MIE coarse
MIFTIMES=            103308721 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32284168 / Exposure Complete: MIE coarse
MIFTIMEC=            103308721 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32284168 / Readout Start: MIE coarse
MIFREADS=            103308721 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32284354 / Readout Complete: MIE coarse
MIFREADC=            103309318 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 320 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  160 / extension version number
ROOTNAME= 'ibh719gvq                         ' / rootname of the observation set
EXPNAME = 'ibh719gvq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  193 / Observation number
IHDRCNT =                  161 / Number of headers currently in EDAC RAM
IIMGCNT =                  161 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             22909384 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3381 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3273 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.55545 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.61132 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  250 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  247 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  248 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29397 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 321 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  161 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36319 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32290994 / Exposure Start Time: MIE coarse
MIFTIMES=            103330565 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32290994 / Exposure Complete: MIE coarse
MIFTIMEC=            103330565 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32290994 / Readout Start: MIE coarse
MIFREADS=            103330565 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32291218 / Readout Complete: MIE coarse
MIFREADC=            103331283 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 322 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  161 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  224 / Observation number
IHDRCNT =                  192 / Number of headers currently in EDAC RAM
IIMGCNT =                  192 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24090112 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4032 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.44356 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.21239 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  103 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  103 / CS memory monitor #5
ICSMEM06=                  103 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  103 / CS memory monitor #9
ICSMEM10=                  103 / CS memory monitor #10
ICSMEM11=                  103 / CS memory monitor #11
ICSMEM12=                  103 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                  103 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 323 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  162 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36318 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32290769 / Exposure Start Time: MIE coarse
MIFTIMES=            103329847 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32290770 / Exposure Complete: MIE coarse
MIFTIMEC=            103329847 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32290770 / Readout Start: MIE coarse
MIFREADS=            103329847 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32290994 / Readout Complete: MIE coarse
MIFREADC=            103330565 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 324 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  162 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  223 / Observation number
IHDRCNT =                  191 / Number of headers currently in EDAC RAM
IIMGCNT =                  191 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24052024 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4011 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.42896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.21239 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   89 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   89 / CS memory monitor #5
ICSMEM06=                   89 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   89 / CS memory monitor #9
ICSMEM10=                   89 / CS memory monitor #10
ICSMEM11=                   89 / CS memory monitor #11
ICSMEM12=                   89 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                   89 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 325 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  163 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36317 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32290545 / Exposure Start Time: MIE coarse
MIFTIMES=            103329128 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32290545 / Exposure Complete: MIE coarse
MIFTIMEC=            103329129 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32290545 / Readout Start: MIE coarse
MIFREADS=            103329129 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32290769 / Readout Complete: MIE coarse
MIFREADC=            103329847 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 326 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  163 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  222 / Observation number
IHDRCNT =                  190 / Number of headers currently in EDAC RAM
IIMGCNT =                  190 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24013936 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3990 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.45329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.22212 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 327 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  164 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36316 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32290321 / Exposure Start Time: MIE coarse
MIFTIMES=            103328410 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32290321 / Exposure Complete: MIE coarse
MIFTIMEC=            103328411 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32290321 / Readout Start: MIE coarse
MIFREADS=            103328411 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32290545 / Readout Complete: MIE coarse
MIFREADC=            103329128 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 328 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  164 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  221 / Observation number
IHDRCNT =                  189 / Number of headers currently in EDAC RAM
IIMGCNT =                  189 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23975848 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3969 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40274 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.47761 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.27077 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 329 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  165 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36315 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32290096 / Exposure Start Time: MIE coarse
MIFTIMES=            103327692 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32290096 / Exposure Complete: MIE coarse
MIFTIMEC=            103327693 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32290096 / Readout Start: MIE coarse
MIFREADS=            103327693 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32290321 / Readout Complete: MIE coarse
MIFREADC=            103328410 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 330 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  165 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  220 / Observation number
IHDRCNT =                  188 / Number of headers currently in EDAC RAM
IIMGCNT =                  188 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23937760 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3948 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40277 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.51653 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.26104 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 331 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  166 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36314 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32289872 / Exposure Start Time: MIE coarse
MIFTIMES=            103326974 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32289872 / Exposure Complete: MIE coarse
MIFTIMEC=            103326974 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32289872 / Readout Start: MIE coarse
MIFREADS=            103326974 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32290096 / Readout Complete: MIE coarse
MIFREADC=            103327692 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 332 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  166 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  219 / Observation number
IHDRCNT =                  187 / Number of headers currently in EDAC RAM
IIMGCNT =                  187 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23899672 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3927 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.51166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.32915 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   31 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   31 / CS memory monitor #5
ICSMEM06=                   31 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   31 / CS memory monitor #9
ICSMEM10=                   31 / CS memory monitor #10
ICSMEM11=                   31 / CS memory monitor #11
ICSMEM12=                   31 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                   31 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 333 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  167 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36313 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32289648 / Exposure Start Time: MIE coarse
MIFTIMES=            103326256 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32289648 / Exposure Complete: MIE coarse
MIFTIMEC=            103326257 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32289648 / Readout Start: MIE coarse
MIFREADS=            103326257 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32289872 / Readout Complete: MIE coarse
MIFREADC=            103326974 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 334 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  167 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  218 / Observation number
IHDRCNT =                  186 / Number of headers currently in EDAC RAM
IIMGCNT =                  186 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23861584 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3906 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.47275 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.34861 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   17 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   17 / CS memory monitor #5
ICSMEM06=                   17 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   17 / CS memory monitor #9
ICSMEM10=                   17 / CS memory monitor #10
ICSMEM11=                   17 / CS memory monitor #11
ICSMEM12=                   17 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                   17 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 335 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  168 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36312 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32289423 / Exposure Start Time: MIE coarse
MIFTIMES=            103325538 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32289423 / Exposure Complete: MIE coarse
MIFTIMEC=            103325538 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32289423 / Readout Start: MIE coarse
MIFREADS=            103325538 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32289647 / Readout Complete: MIE coarse
MIFREADC=            103326256 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 336 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  168 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  217 / Observation number
IHDRCNT =                  185 / Number of headers currently in EDAC RAM
IIMGCNT =                  185 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23823496 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3885 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.52139 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    3 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    3 / CS memory monitor #5
ICSMEM06=                    3 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    3 / CS memory monitor #9
ICSMEM10=                    3 / CS memory monitor #10
ICSMEM11=                    3 / CS memory monitor #11
ICSMEM12=                    3 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29400 / Major frame count
IMINFCNT=                    3 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 337 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  169 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36311 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32289199 / Exposure Start Time: MIE coarse
MIFTIMES=            103324820 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32289199 / Exposure Complete: MIE coarse
MIFTIMEC=            103324820 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32289199 / Readout Start: MIE coarse
MIFREADS=            103324820 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32289423 / Readout Complete: MIE coarse
MIFREADC=            103325538 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 338 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  169 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  216 / Observation number
IHDRCNT =                  184 / Number of headers currently in EDAC RAM
IIMGCNT =                  184 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23785408 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3864 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.46788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  108 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  108 / CS memory monitor #5
ICSMEM06=                  108 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  108 / CS memory monitor #9
ICSMEM10=                  108 / CS memory monitor #10
ICSMEM11=                  108 / CS memory monitor #11
ICSMEM12=                  108 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                  108 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 339 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  170 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36310 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32288974 / Exposure Start Time: MIE coarse
MIFTIMES=            103324101 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32288974 / Exposure Complete: MIE coarse
MIFTIMEC=            103324102 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32288974 / Readout Start: MIE coarse
MIFREADS=            103324102 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32289198 / Readout Complete: MIE coarse
MIFREADC=            103324820 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 340 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  170 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  215 / Observation number
IHDRCNT =                  183 / Number of headers currently in EDAC RAM
IIMGCNT =                  183 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23747320 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3843 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40277 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.50193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   94 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   94 / CS memory monitor #5
ICSMEM06=                   94 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   94 / CS memory monitor #9
ICSMEM10=                   94 / CS memory monitor #10
ICSMEM11=                   94 / CS memory monitor #11
ICSMEM12=                   94 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   94 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 341 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  171 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36309 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32288750 / Exposure Start Time: MIE coarse
MIFTIMES=            103323383 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32288750 / Exposure Complete: MIE coarse
MIFTIMEC=            103323384 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32288750 / Readout Start: MIE coarse
MIFREADS=            103323384 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32288974 / Readout Complete: MIE coarse
MIFREADC=            103324101 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 342 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  171 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  214 / Observation number
IHDRCNT =                  182 / Number of headers currently in EDAC RAM
IIMGCNT =                  182 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23709232 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3822 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.47275 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.41672 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 343 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  172 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36308 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32288525 / Exposure Start Time: MIE coarse
MIFTIMES=            103322665 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32288525 / Exposure Complete: MIE coarse
MIFTIMEC=            103322666 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32288525 / Readout Start: MIE coarse
MIFREADS=            103322666 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32288750 / Readout Complete: MIE coarse
MIFREADC=            103323383 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 344 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  172 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  213 / Observation number
IHDRCNT =                  181 / Number of headers currently in EDAC RAM
IIMGCNT =                  181 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23671144 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3801 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40276 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.50193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.40699 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   65 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   65 / CS memory monitor #5
ICSMEM06=                   65 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   65 / CS memory monitor #9
ICSMEM10=                   65 / CS memory monitor #10
ICSMEM11=                   65 / CS memory monitor #11
ICSMEM12=                   65 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   65 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 345 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  173 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36307 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32288301 / Exposure Start Time: MIE coarse
MIFTIMES=            103321947 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32288301 / Exposure Complete: MIE coarse
MIFTIMEC=            103321947 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32288301 / Readout Start: MIE coarse
MIFREADS=            103321948 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32288525 / Readout Complete: MIE coarse
MIFREADC=            103322665 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 346 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  173 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  212 / Observation number
IHDRCNT =                  180 / Number of headers currently in EDAC RAM
IIMGCNT =                  180 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23633056 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3780 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.51166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.45564 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   51 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   51 / CS memory monitor #5
ICSMEM06=                   51 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   51 / CS memory monitor #9
ICSMEM10=                   51 / CS memory monitor #10
ICSMEM11=                   51 / CS memory monitor #11
ICSMEM12=                   51 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   51 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 347 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  174 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36306 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32288076 / Exposure Start Time: MIE coarse
MIFTIMES=            103321229 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32288077 / Exposure Complete: MIE coarse
MIFTIMEC=            103321229 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32288077 / Readout Start: MIE coarse
MIFREADS=            103321229 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32288301 / Readout Complete: MIE coarse
MIFREADC=            103321947 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 348 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  174 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  211 / Observation number
IHDRCNT =                  179 / Number of headers currently in EDAC RAM
IIMGCNT =                  179 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23594968 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3759 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40278 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.49221 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.49456 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 349 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  175 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36305 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32288073 / Exposure Start Time: MIE coarse
MIFTIMES=            103321218 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32288073 / Exposure Complete: MIE coarse
MIFTIMEC=            103321218 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32288073 / Readout Start: MIE coarse
MIFREADS=            103321218 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32288076 / Readout Complete: MIE coarse
MIFREADC=            103321229 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 350 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  175 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  210 / Observation number
IHDRCNT =                  178 / Number of headers currently in EDAC RAM
IIMGCNT =                  178 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23556880 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3738 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                40234 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              5.83333 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.52139 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.46537 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  250 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 351 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  176 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36304 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32287886 / Exposure Start Time: MIE coarse
MIFTIMES=            103320621 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32287887 / Exposure Complete: MIE coarse
MIFTIMEC=            103320621 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32287887 / Readout Start: MIE coarse
MIFREADS=            103320621 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32288073 / Readout Complete: MIE coarse
MIFREADC=            103321218 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 352 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  176 / extension version number
ROOTNAME= 'ibh719gwq                         ' / rootname of the observation set
EXPNAME = 'ibh719gwq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  209 / Observation number
IHDRCNT =                  177 / Number of headers currently in EDAC RAM
IIMGCNT =                  177 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             23518792 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3717 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3274 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.53599 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.46537 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  252 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  249 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  254 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29399 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 353 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  177 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36335 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32294713 / Exposure Start Time: MIE coarse
MIFTIMES=            103342465 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32294713 / Exposure Complete: MIE coarse
MIFTIMEC=            103342465 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32294713 / Readout Start: MIE coarse
MIFREADS=            103342465 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32294937 / Readout Complete: MIE coarse
MIFREADC=            103343183 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 354 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  177 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  240 / Observation number
IHDRCNT =                   16 / Number of headers currently in EDAC RAM
IIMGCNT =                   16 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24699520 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  336 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.35599 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  101 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  101 / CS memory monitor #5
ICSMEM06=                  101 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  101 / CS memory monitor #9
ICSMEM10=                  101 / CS memory monitor #10
ICSMEM11=                  101 / CS memory monitor #11
ICSMEM12=                  101 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                  101 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 355 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  178 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36334 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32294488 / Exposure Start Time: MIE coarse
MIFTIMES=            103341747 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32294488 / Exposure Complete: MIE coarse
MIFTIMEC=            103341747 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32294488 / Readout Start: MIE coarse
MIFREADS=            103341747 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32294713 / Readout Complete: MIE coarse
MIFREADC=            103342465 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 356 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  178 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  239 / Observation number
IHDRCNT =                   15 / Number of headers currently in EDAC RAM
IIMGCNT =                   15 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24661432 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  315 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.38031 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   87 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   87 / CS memory monitor #5
ICSMEM06=                   87 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   87 / CS memory monitor #9
ICSMEM10=                   87 / CS memory monitor #10
ICSMEM11=                   87 / CS memory monitor #11
ICSMEM12=                   87 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                   87 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 357 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  179 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36333 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32294264 / Exposure Start Time: MIE coarse
MIFTIMES=            103341029 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32294264 / Exposure Complete: MIE coarse
MIFTIMEC=            103341029 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32294264 / Readout Start: MIE coarse
MIFREADS=            103341029 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32294488 / Readout Complete: MIE coarse
MIFREADC=            103341746 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 358 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  179 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  182 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  238 / Observation number
IHDRCNT =                  206 / Number of headers currently in EDAC RAM
IIMGCNT =                  206 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24623344 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4326 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.37058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.06644 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 359 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  180 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36332 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32294039 / Exposure Start Time: MIE coarse
MIFTIMES=            103340310 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32294039 / Exposure Complete: MIE coarse
MIFTIMEC=            103340311 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32294040 / Readout Start: MIE coarse
MIFREADS=            103340311 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32294264 / Readout Complete: MIE coarse
MIFREADC=            103341029 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 360 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  180 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  163 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  237 / Observation number
IHDRCNT =                  205 / Number of headers currently in EDAC RAM
IIMGCNT =                  205 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24585256 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4305 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.39004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.07822 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 361 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  181 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36331 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32293815 / Exposure Start Time: MIE coarse
MIFTIMES=            103339592 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32293815 / Exposure Complete: MIE coarse
MIFTIMEC=            103339593 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32293815 / Readout Start: MIE coarse
MIFREADS=            103339593 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32294039 / Readout Complete: MIE coarse
MIFREADC=            103340310 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 362 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  181 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  143 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  236 / Observation number
IHDRCNT =                  204 / Number of headers currently in EDAC RAM
IIMGCNT =                  204 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24547168 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4284 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.39004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.06644 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 363 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  182 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36330 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32293591 / Exposure Start Time: MIE coarse
MIFTIMES=            103338874 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32293591 / Exposure Complete: MIE coarse
MIFTIMEC=            103338874 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32293591 / Readout Start: MIE coarse
MIFREADS=            103338875 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32293815 / Readout Complete: MIE coarse
MIFREADC=            103339592 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 364 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  182 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  123 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  235 / Observation number
IHDRCNT =                  203 / Number of headers currently in EDAC RAM
IIMGCNT =                  203 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24509080 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4263 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.40464 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   29 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   29 / CS memory monitor #5
ICSMEM06=                   29 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   29 / CS memory monitor #9
ICSMEM10=                   29 / CS memory monitor #10
ICSMEM11=                   29 / CS memory monitor #11
ICSMEM12=                   29 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                   29 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 365 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  183 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36329 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32293366 / Exposure Start Time: MIE coarse
MIFTIMES=            103338156 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32293366 / Exposure Complete: MIE coarse
MIFTIMEC=            103338156 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32293366 / Readout Start: MIE coarse
MIFREADS=            103338156 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32293591 / Readout Complete: MIE coarse
MIFREADC=            103338874 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 366 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  183 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  104 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  234 / Observation number
IHDRCNT =                  202 / Number of headers currently in EDAC RAM
IIMGCNT =                  202 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24470992 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4242 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               6.4095 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.06644 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   15 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   15 / CS memory monitor #5
ICSMEM06=                   15 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   15 / CS memory monitor #9
ICSMEM10=                   15 / CS memory monitor #10
ICSMEM11=                   15 / CS memory monitor #11
ICSMEM12=                   15 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                   15 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 367 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  184 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36328 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32293142 / Exposure Start Time: MIE coarse
MIFTIMES=            103337438 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32293142 / Exposure Complete: MIE coarse
MIFTIMEC=            103337438 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32293142 / Readout Start: MIE coarse
MIFREADS=            103337438 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32293366 / Readout Complete: MIE coarse
MIFREADC=            103338156 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 368 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  184 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   84 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  233 / Observation number
IHDRCNT =                  201 / Number of headers currently in EDAC RAM
IIMGCNT =                  201 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24432904 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4221 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40236 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.4095 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    1 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    1 / CS memory monitor #5
ICSMEM06=                    1 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    1 / CS memory monitor #9
ICSMEM10=                    1 / CS memory monitor #10
ICSMEM11=                    1 / CS memory monitor #11
ICSMEM12=                    1 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29402 / Major frame count
IMINFCNT=                    1 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 369 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  185 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36327 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32292917 / Exposure Start Time: MIE coarse
MIFTIMES=            103336720 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32292917 / Exposure Complete: MIE coarse
MIFTIMEC=            103336720 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32292917 / Readout Start: MIE coarse
MIFREADS=            103336720 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32293142 / Readout Complete: MIE coarse
MIFREADC=            103337438 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 370 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  185 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   64 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  232 / Observation number
IHDRCNT =                  200 / Number of headers currently in EDAC RAM
IIMGCNT =                  200 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24394816 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4200 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.43383 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  106 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  106 / CS memory monitor #5
ICSMEM06=                  106 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  106 / CS memory monitor #9
ICSMEM10=                  106 / CS memory monitor #10
ICSMEM11=                  106 / CS memory monitor #11
ICSMEM12=                  106 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                  106 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 371 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  186 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36326 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32292693 / Exposure Start Time: MIE coarse
MIFTIMES=            103336001 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32292693 / Exposure Complete: MIE coarse
MIFTIMEC=            103336002 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32292693 / Readout Start: MIE coarse
MIFREADS=            103336002 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32292917 / Readout Complete: MIE coarse
MIFREADC=            103336720 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 372 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  186 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   45 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  231 / Observation number
IHDRCNT =                  199 / Number of headers currently in EDAC RAM
IIMGCNT =                  199 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24356728 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4179 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.43383 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.06644 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   92 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   92 / CS memory monitor #5
ICSMEM06=                   92 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   92 / CS memory monitor #9
ICSMEM10=                   92 / CS memory monitor #10
ICSMEM11=                   92 / CS memory monitor #11
ICSMEM12=                   92 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   92 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 373 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  187 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36325 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32292468 / Exposure Start Time: MIE coarse
MIFTIMES=            103335283 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32292469 / Exposure Complete: MIE coarse
MIFTIMEC=            103335284 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32292469 / Readout Start: MIE coarse
MIFREADS=            103335284 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32292693 / Readout Complete: MIE coarse
MIFREADC=            103336001 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 374 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  187 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   25 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  230 / Observation number
IHDRCNT =                  198 / Number of headers currently in EDAC RAM
IIMGCNT =                  198 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24318640 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4158 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.4241 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.07617 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 375 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  188 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36324 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32292244 / Exposure Start Time: MIE coarse
MIFTIMES=            103334565 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32292244 / Exposure Complete: MIE coarse
MIFTIMEC=            103334566 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32292244 / Readout Start: MIE coarse
MIFREADS=            103334566 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32292468 / Readout Complete: MIE coarse
MIFREADC=            103335283 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 376 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  188 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                    6 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  229 / Observation number
IHDRCNT =                  197 / Number of headers currently in EDAC RAM
IIMGCNT =                  197 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24280552 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4137 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.45329 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.07617 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   63 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   63 / CS memory monitor #5
ICSMEM06=                   63 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   63 / CS memory monitor #9
ICSMEM10=                   63 / CS memory monitor #10
ICSMEM11=                   63 / CS memory monitor #11
ICSMEM12=                   63 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    0 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  254 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    5 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   63 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 377 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  189 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36323 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32292020 / Exposure Start Time: MIE coarse
MIFTIMES=            103333847 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32292020 / Exposure Complete: MIE coarse
MIFTIMEC=            103333847 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32292020 / Readout Start: MIE coarse
MIFREADS=            103333847 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32292244 / Readout Complete: MIE coarse
MIFREADC=            103334565 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 378 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  189 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  228 / Observation number
IHDRCNT =                  196 / Number of headers currently in EDAC RAM
IIMGCNT =                  196 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24242464 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4116 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2626 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.41923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.07617 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   49 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   49 / CS memory monitor #5
ICSMEM06=                   49 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   49 / CS memory monitor #9
ICSMEM10=                   49 / CS memory monitor #10
ICSMEM11=                   49 / CS memory monitor #11
ICSMEM12=                   49 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  255 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  253 / Number of normal MAR's processed by the FSW
ILASTNRM=                   69 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    4 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   49 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 379 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  190 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36322 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32291795 / Exposure Start Time: MIE coarse
MIFTIMES=            103333129 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32291795 / Exposure Complete: MIE coarse
MIFTIMEC=            103333129 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32291795 / Readout Start: MIE coarse
MIFREADS=            103333129 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32292020 / Readout Complete: MIE coarse
MIFREADC=            103333847 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 380 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  190 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  227 / Observation number
IHDRCNT =                  195 / Number of headers currently in EDAC RAM
IIMGCNT =                  195 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24204376 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4095 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.43383 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  254 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  252 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    4 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 381 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  191 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36321 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32291792 / Exposure Start Time: MIE coarse
MIFTIMES=            103333118 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32291792 / Exposure Complete: MIE coarse
MIFTIMEC=            103333118 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32291792 / Readout Start: MIE coarse
MIFREADS=            103333118 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32291795 / Readout Complete: MIE coarse
MIFREADC=            103333129 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 382 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  191 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  226 / Observation number
IHDRCNT =                  194 / Number of headers currently in EDAC RAM
IIMGCNT =                  194 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24166288 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4074 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                40204 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.43383 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  254 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  252 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    4 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 383 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  192 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36320 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32291605 / Exposure Start Time: MIE coarse
MIFTIMES=            103332521 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32291605 / Exposure Complete: MIE coarse
MIFTIMEC=            103332521 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32291605 / Readout Start: MIE coarse
MIFREADS=            103332521 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32291792 / Readout Complete: MIE coarse
MIFREADC=            103333118 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 384 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  192 / extension version number
ROOTNAME= 'ibh719gxq                         ' / rootname of the observation set
EXPNAME = 'ibh719gxq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                    1 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                325.5 / Time allowed to complete dump before timeout
IOBSNUM =                  225 / Observation number
IHDRCNT =                  193 / Number of headers currently in EDAC RAM
IIMGCNT =                  193 / # of images currently stored in CS Buffer memor
IIMGEXTP=             16777216 / Pointer to Image Buffer space of next image
IIMGINSP=             24128200 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4053 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3275 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -29.2857 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -31.6667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -30.8333 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =              18.5206 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.45815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                  254 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  251 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                    4 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29401 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 385 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  193 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36351 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32298431 / Exposure Start Time: MIE coarse
MIFTIMES=            103354365 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32298432 / Exposure Complete: MIE coarse
MIFTIMEC=            103354365 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32298432 / Readout Start: MIE coarse
MIFREADS=            103354365 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32298656 / Readout Complete: MIE coarse
MIFREADC=            103355083 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 386 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  193 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    0 / Observation number
IHDRCNT =                   32 / Number of headers currently in EDAC RAM
IIMGCNT =                   32 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25308928 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  672 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   99 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   99 / CS memory monitor #5
ICSMEM06=                   99 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   99 / CS memory monitor #9
ICSMEM10=                   99 / CS memory monitor #10
ICSMEM11=                   99 / CS memory monitor #11
ICSMEM12=                   99 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   99 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 387 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  194 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36350 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32298207 / Exposure Start Time: MIE coarse
MIFTIMES=            103353646 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32298207 / Exposure Complete: MIE coarse
MIFTIMEC=            103353647 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32298207 / Readout Start: MIE coarse
MIFREADS=            103353647 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32298431 / Readout Complete: MIE coarse
MIFREADC=            103354365 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 388 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  194 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  255 / Observation number
IHDRCNT =                   31 / Number of headers currently in EDAC RAM
IIMGCNT =                   31 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25270840 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  651 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   85 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   85 / CS memory monitor #5
ICSMEM06=                   85 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   85 / CS memory monitor #9
ICSMEM10=                   85 / CS memory monitor #10
ICSMEM11=                   85 / CS memory monitor #11
ICSMEM12=                   85 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   85 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 389 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  195 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36349 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32297983 / Exposure Start Time: MIE coarse
MIFTIMES=            103352928 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32297983 / Exposure Complete: MIE coarse
MIFTIMEC=            103352929 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32297983 / Readout Start: MIE coarse
MIFREADS=            103352929 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32298207 / Readout Complete: MIE coarse
MIFREADC=            103353646 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 390 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  195 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  254 / Observation number
IHDRCNT =                   30 / Number of headers currently in EDAC RAM
IIMGCNT =                   30 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25232752 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  630 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.42195 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.27328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 391 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  196 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36348 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32297758 / Exposure Start Time: MIE coarse
MIFTIMES=            103352210 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32297758 / Exposure Complete: MIE coarse
MIFTIMEC=            103352211 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32297758 / Readout Start: MIE coarse
MIFREADS=            103352211 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32297983 / Readout Complete: MIE coarse
MIFREADC=            103352928 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 392 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  196 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  253 / Observation number
IHDRCNT =                   29 / Number of headers currently in EDAC RAM
IIMGCNT =                   29 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25194664 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  609 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 393 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  197 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36347 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32297534 / Exposure Start Time: MIE coarse
MIFTIMES=            103351492 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32297534 / Exposure Complete: MIE coarse
MIFTIMEC=            103351492 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32297534 / Readout Start: MIE coarse
MIFREADS=            103351492 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32297758 / Readout Complete: MIE coarse
MIFREADC=            103352210 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 394 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  197 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  252 / Observation number
IHDRCNT =                   28 / Number of headers currently in EDAC RAM
IIMGCNT =                   28 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25156576 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  588 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.27328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 395 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  198 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36346 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32297309 / Exposure Start Time: MIE coarse
MIFTIMES=            103350774 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32297309 / Exposure Complete: MIE coarse
MIFTIMEC=            103350774 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32297309 / Readout Start: MIE coarse
MIFREADS=            103350774 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32297534 / Readout Complete: MIE coarse
MIFREADC=            103351492 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 396 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  198 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  251 / Observation number
IHDRCNT =                   27 / Number of headers currently in EDAC RAM
IIMGCNT =                   27 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25118488 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  567 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.30247 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   27 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   27 / CS memory monitor #5
ICSMEM06=                   27 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   27 / CS memory monitor #9
ICSMEM10=                   27 / CS memory monitor #10
ICSMEM11=                   27 / CS memory monitor #11
ICSMEM12=                   27 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   27 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 397 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  199 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36345 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32297085 / Exposure Start Time: MIE coarse
MIFTIMES=            103350056 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32297085 / Exposure Complete: MIE coarse
MIFTIMEC=            103350057 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32297085 / Readout Start: MIE coarse
MIFREADS=            103350057 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32297309 / Readout Complete: MIE coarse
MIFREADC=            103350774 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 398 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  199 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  250 / Observation number
IHDRCNT =                   26 / Number of headers currently in EDAC RAM
IIMGCNT =                   26 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25080400 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  546 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.61717 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.28788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   13 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   13 / CS memory monitor #5
ICSMEM06=                   13 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   13 / CS memory monitor #9
ICSMEM10=                   13 / CS memory monitor #10
ICSMEM11=                   13 / CS memory monitor #11
ICSMEM12=                   13 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29404 / Major frame count
IMINFCNT=                   13 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 399 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  200 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36344 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32296860 / Exposure Start Time: MIE coarse
MIFTIMES=            103349338 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32296861 / Exposure Complete: MIE coarse
MIFTIMEC=            103349338 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32296861 / Readout Start: MIE coarse
MIFREADS=            103349338 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32297085 / Readout Complete: MIE coarse
MIFREADC=            103350056 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 400 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  200 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  249 / Observation number
IHDRCNT =                   25 / Number of headers currently in EDAC RAM
IIMGCNT =                   25 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25042312 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  525 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.31707 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  119 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  119 / CS memory monitor #5
ICSMEM06=                  119 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  119 / CS memory monitor #9
ICSMEM10=                  119 / CS memory monitor #10
ICSMEM11=                  119 / CS memory monitor #11
ICSMEM12=                  119 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                  119 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 401 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  201 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36343 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32296636 / Exposure Start Time: MIE coarse
MIFTIMES=            103348619 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32296636 / Exposure Complete: MIE coarse
MIFTIMEC=            103348620 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32296636 / Readout Start: MIE coarse
MIFREADS=            103348620 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32296860 / Readout Complete: MIE coarse
MIFREADC=            103349338 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 402 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  201 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  248 / Observation number
IHDRCNT =                   24 / Number of headers currently in EDAC RAM
IIMGCNT =                   24 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25004224 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  504 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.31707 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  104 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  104 / CS memory monitor #5
ICSMEM06=                  104 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  104 / CS memory monitor #9
ICSMEM10=                  104 / CS memory monitor #10
ICSMEM11=                  104 / CS memory monitor #11
ICSMEM12=                  104 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                  104 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 403 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  202 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36342 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32296412 / Exposure Start Time: MIE coarse
MIFTIMES=            103347901 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32296412 / Exposure Complete: MIE coarse
MIFTIMEC=            103347902 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32296412 / Readout Start: MIE coarse
MIFREADS=            103347902 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32296636 / Readout Complete: MIE coarse
MIFREADC=            103348619 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 404 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  202 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  247 / Observation number
IHDRCNT =                   23 / Number of headers currently in EDAC RAM
IIMGCNT =                   23 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24966136 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  483 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.04698 / IR FPA six-stage TEC voltage
IRCETECV=               6.3268 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.02752 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   90 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   90 / CS memory monitor #5
ICSMEM06=                   90 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   90 / CS memory monitor #9
ICSMEM10=                   90 / CS memory monitor #10
ICSMEM11=                   90 / CS memory monitor #11
ICSMEM12=                   90 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   90 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 405 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  203 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36341 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32296187 / Exposure Start Time: MIE coarse
MIFTIMES=            103347183 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32296187 / Exposure Complete: MIE coarse
MIFTIMEC=            103347184 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32296187 / Readout Start: MIE coarse
MIFREADS=            103347184 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32296412 / Readout Complete: MIE coarse
MIFREADC=            103347901 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 406 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  203 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  246 / Observation number
IHDRCNT =                   22 / Number of headers currently in EDAC RAM
IIMGCNT =                   22 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24928048 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  462 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.33166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 407 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  204 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36340 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32295963 / Exposure Start Time: MIE coarse
MIFTIMES=            103346465 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32295963 / Exposure Complete: MIE coarse
MIFTIMEC=            103346465 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32295963 / Readout Start: MIE coarse
MIFREADS=            103346465 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32296187 / Readout Complete: MIE coarse
MIFREADC=            103347183 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 408 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  204 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  245 / Observation number
IHDRCNT =                   21 / Number of headers currently in EDAC RAM
IIMGCNT =                   21 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24889960 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  441 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.35112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   61 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   61 / CS memory monitor #5
ICSMEM06=                   61 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   61 / CS memory monitor #9
ICSMEM10=                   61 / CS memory monitor #10
ICSMEM11=                   61 / CS memory monitor #11
ICSMEM12=                   61 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   61 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 409 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  205 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36339 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32295738 / Exposure Start Time: MIE coarse
MIFTIMES=            103345747 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32295738 / Exposure Complete: MIE coarse
MIFTIMEC=            103345747 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32295738 / Readout Start: MIE coarse
MIFREADS=            103345747 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32295963 / Readout Complete: MIE coarse
MIFREADC=            103346465 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 410 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  205 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  244 / Observation number
IHDRCNT =                   20 / Number of headers currently in EDAC RAM
IIMGCNT =                   20 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24851872 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  420 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.33166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   47 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   47 / CS memory monitor #5
ICSMEM06=                   47 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   47 / CS memory monitor #9
ICSMEM10=                   47 / CS memory monitor #10
ICSMEM11=                   47 / CS memory monitor #11
ICSMEM12=                   47 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   47 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 411 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  206 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36338 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32295514 / Exposure Start Time: MIE coarse
MIFTIMES=            103345029 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32295514 / Exposure Complete: MIE coarse
MIFTIMEC=            103345029 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32295514 / Readout Start: MIE coarse
MIFREADS=            103345029 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32295738 / Readout Complete: MIE coarse
MIFREADC=            103345747 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 412 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  206 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  243 / Observation number
IHDRCNT =                   19 / Number of headers currently in EDAC RAM
IIMGCNT =                   19 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24813784 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  399 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.36085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 413 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  207 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36337 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32295510 / Exposure Start Time: MIE coarse
MIFTIMES=            103345018 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32295511 / Exposure Complete: MIE coarse
MIFTIMEC=            103345018 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32295511 / Readout Start: MIE coarse
MIFREADS=            103345018 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32295514 / Readout Complete: MIE coarse
MIFREADC=            103345029 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 414 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  207 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  242 / Observation number
IHDRCNT =                   18 / Number of headers currently in EDAC RAM
IIMGCNT =                   18 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24775696 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  378 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                40204 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.32193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    0 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 415 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  208 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36336 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32295324 / Exposure Start Time: MIE coarse
MIFTIMES=            103344421 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32295324 / Exposure Complete: MIE coarse
MIFTIMEC=            103344421 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32295324 / Readout Start: MIE coarse
MIFREADS=            103344421 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32295510 / Readout Complete: MIE coarse
MIFREADC=            103345017 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 416 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  208 / extension version number
ROOTNAME= 'ibh719gzq                         ' / rootname of the observation set
EXPNAME = 'ibh719gzq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  241 / Observation number
IHDRCNT =                   17 / Number of headers currently in EDAC RAM
IIMGCNT =                   17 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             24737608 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  357 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3276 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -31.6667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.33166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    2 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                  255 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   11 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29403 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 417 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  209 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36367 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32302150 / Exposure Start Time: MIE coarse
MIFTIMES=            103366265 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32302150 / Exposure Complete: MIE coarse
MIFTIMEC=            103366265 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32302150 / Readout Start: MIE coarse
MIFREADS=            103366265 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32302375 / Readout Complete: MIE coarse
MIFREADC=            103366983 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 418 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  209 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   16 / Observation number
IHDRCNT =                   48 / Number of headers currently in EDAC RAM
IIMGCNT =                   48 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25918336 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1008 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7398 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.16139 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   97 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   97 / CS memory monitor #5
ICSMEM06=                   97 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   97 / CS memory monitor #9
ICSMEM10=                   97 / CS memory monitor #10
ICSMEM11=                   97 / CS memory monitor #11
ICSMEM12=                   97 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   97 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 419 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  210 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36366 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32301926 / Exposure Start Time: MIE coarse
MIFTIMES=            103365546 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32301926 / Exposure Complete: MIE coarse
MIFTIMEC=            103365547 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32301926 / Readout Start: MIE coarse
MIFREADS=            103365547 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32302150 / Readout Complete: MIE coarse
MIFREADC=            103366264 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 420 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  210 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   15 / Observation number
IHDRCNT =                   47 / Number of headers currently in EDAC RAM
IIMGCNT =                   47 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25880248 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  987 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.17112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   83 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   83 / CS memory monitor #5
ICSMEM06=                   83 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   83 / CS memory monitor #9
ICSMEM10=                   83 / CS memory monitor #10
ICSMEM11=                   83 / CS memory monitor #11
ICSMEM12=                   83 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   83 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 421 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  211 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36365 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32301701 / Exposure Start Time: MIE coarse
MIFTIMES=            103364829 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32301702 / Exposure Complete: MIE coarse
MIFTIMEC=            103364829 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32301702 / Readout Start: MIE coarse
MIFREADS=            103364829 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32301926 / Readout Complete: MIE coarse
MIFREADC=            103365546 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 422 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  211 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   14 / Observation number
IHDRCNT =                   46 / Number of headers currently in EDAC RAM
IIMGCNT =                   46 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25842160 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  966 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.14679 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   68 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   68 / CS memory monitor #5
ICSMEM06=                   68 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   68 / CS memory monitor #9
ICSMEM10=                   68 / CS memory monitor #10
ICSMEM11=                   68 / CS memory monitor #11
ICSMEM12=                   68 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   68 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 423 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  212 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36364 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32301477 / Exposure Start Time: MIE coarse
MIFTIMES=            103364110 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32301477 / Exposure Complete: MIE coarse
MIFTIMEC=            103364111 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32301477 / Readout Start: MIE coarse
MIFREADS=            103364111 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32301701 / Readout Complete: MIE coarse
MIFREADC=            103364828 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 424 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  212 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   13 / Observation number
IHDRCNT =                   45 / Number of headers currently in EDAC RAM
IIMGCNT =                   45 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25804072 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  945 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.18085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 425 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  213 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36363 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32301252 / Exposure Start Time: MIE coarse
MIFTIMES=            103363392 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32301253 / Exposure Complete: MIE coarse
MIFTIMEC=            103363392 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32301253 / Readout Start: MIE coarse
MIFREADS=            103363392 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32301477 / Readout Complete: MIE coarse
MIFREADC=            103364110 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 426 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  213 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   12 / Observation number
IHDRCNT =                   44 / Number of headers currently in EDAC RAM
IIMGCNT =                   44 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25765984 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  924 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.18571 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 427 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  214 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36362 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32301028 / Exposure Start Time: MIE coarse
MIFTIMES=            103362674 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32301028 / Exposure Complete: MIE coarse
MIFTIMEC=            103362674 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32301028 / Readout Start: MIE coarse
MIFREADS=            103362674 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32301252 / Readout Complete: MIE coarse
MIFREADC=            103363392 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 428 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  214 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   11 / Observation number
IHDRCNT =                   43 / Number of headers currently in EDAC RAM
IIMGCNT =                   43 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25727896 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  903 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.17598 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   25 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   25 / CS memory monitor #5
ICSMEM06=                   25 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   25 / CS memory monitor #9
ICSMEM10=                   25 / CS memory monitor #10
ICSMEM11=                   25 / CS memory monitor #11
ICSMEM12=                   25 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   25 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 429 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  215 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36361 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32300804 / Exposure Start Time: MIE coarse
MIFTIMES=            103361956 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32300804 / Exposure Complete: MIE coarse
MIFTIMEC=            103361956 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32300804 / Readout Start: MIE coarse
MIFREADS=            103361956 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32301028 / Readout Complete: MIE coarse
MIFREADC=            103362674 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 430 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  215 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   10 / Observation number
IHDRCNT =                   42 / Number of headers currently in EDAC RAM
IIMGCNT =                   42 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25689808 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  882 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   11 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   11 / CS memory monitor #5
ICSMEM06=                   11 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   11 / CS memory monitor #9
ICSMEM10=                   11 / CS memory monitor #10
ICSMEM11=                   11 / CS memory monitor #11
ICSMEM12=                   11 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29406 / Major frame count
IMINFCNT=                   11 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 431 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  216 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36360 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32300579 / Exposure Start Time: MIE coarse
MIFTIMES=            103361238 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32300579 / Exposure Complete: MIE coarse
MIFTIMEC=            103361238 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32300579 / Readout Start: MIE coarse
MIFREADS=            103361238 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32300804 / Readout Complete: MIE coarse
MIFREADC=            103361956 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 432 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  216 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    9 / Observation number
IHDRCNT =                   41 / Number of headers currently in EDAC RAM
IIMGCNT =                   41 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25651720 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  861 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.18085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  117 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  117 / CS memory monitor #5
ICSMEM06=                  117 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  117 / CS memory monitor #9
ICSMEM10=                  117 / CS memory monitor #10
ICSMEM11=                  117 / CS memory monitor #11
ICSMEM12=                  117 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                  117 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 433 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  217 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36359 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32300355 / Exposure Start Time: MIE coarse
MIFTIMES=            103360519 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32300355 / Exposure Complete: MIE coarse
MIFTIMEC=            103360520 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32300355 / Readout Start: MIE coarse
MIFREADS=            103360520 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32300579 / Readout Complete: MIE coarse
MIFREADC=            103361237 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 434 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  217 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    8 / Observation number
IHDRCNT =                   40 / Number of headers currently in EDAC RAM
IIMGCNT =                   40 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25613632 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  840 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.19544 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  102 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  102 / CS memory monitor #5
ICSMEM06=                  102 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  102 / CS memory monitor #9
ICSMEM10=                  102 / CS memory monitor #10
ICSMEM11=                  102 / CS memory monitor #11
ICSMEM12=                  102 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                  102 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 435 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  218 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36358 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32300130 / Exposure Start Time: MIE coarse
MIFTIMES=            103359801 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32300130 / Exposure Complete: MIE coarse
MIFTIMEC=            103359802 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32300130 / Readout Start: MIE coarse
MIFREADS=            103359802 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32300355 / Readout Complete: MIE coarse
MIFREADC=            103360519 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 436 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  218 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    7 / Observation number
IHDRCNT =                   39 / Number of headers currently in EDAC RAM
IIMGCNT =                   39 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25575544 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  819 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.57811 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.18571 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   88 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   88 / CS memory monitor #5
ICSMEM06=                   88 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   88 / CS memory monitor #9
ICSMEM10=                   88 / CS memory monitor #10
ICSMEM11=                   88 / CS memory monitor #11
ICSMEM12=                   88 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   88 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 437 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  219 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36357 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32299906 / Exposure Start Time: MIE coarse
MIFTIMES=            103359083 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32299906 / Exposure Complete: MIE coarse
MIFTIMEC=            103359084 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32299906 / Readout Start: MIE coarse
MIFREADS=            103359084 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32300130 / Readout Complete: MIE coarse
MIFREADC=            103359801 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 438 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  219 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    6 / Observation number
IHDRCNT =                   38 / Number of headers currently in EDAC RAM
IIMGCNT =                   38 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25537456 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  798 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.19544 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 439 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  220 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36356 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32299682 / Exposure Start Time: MIE coarse
MIFTIMES=            103358365 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32299682 / Exposure Complete: MIE coarse
MIFTIMEC=            103358365 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32299682 / Readout Start: MIE coarse
MIFREADS=            103358365 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32299906 / Readout Complete: MIE coarse
MIFREADC=            103359083 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 440 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  220 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    5 / Observation number
IHDRCNT =                   37 / Number of headers currently in EDAC RAM
IIMGCNT =                   37 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25499368 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  777 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.22463 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   59 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   59 / CS memory monitor #5
ICSMEM06=                   59 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   59 / CS memory monitor #9
ICSMEM10=                   59 / CS memory monitor #10
ICSMEM11=                   59 / CS memory monitor #11
ICSMEM12=                   59 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   59 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 441 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  221 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36355 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32299457 / Exposure Start Time: MIE coarse
MIFTIMES=            103357647 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32299457 / Exposure Complete: MIE coarse
MIFTIMEC=            103357647 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32299457 / Readout Start: MIE coarse
MIFREADS=            103357647 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32299681 / Readout Complete: MIE coarse
MIFREADC=            103358365 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 442 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  221 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    4 / Observation number
IHDRCNT =                   36 / Number of headers currently in EDAC RAM
IIMGCNT =                   36 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25461280 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  756 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   45 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   45 / CS memory monitor #5
ICSMEM06=                   45 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   45 / CS memory monitor #9
ICSMEM10=                   45 / CS memory monitor #10
ICSMEM11=                   45 / CS memory monitor #11
ICSMEM12=                   45 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   45 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 443 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  222 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36354 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32299233 / Exposure Start Time: MIE coarse
MIFTIMES=            103356929 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32299233 / Exposure Complete: MIE coarse
MIFTIMEC=            103356929 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32299233 / Readout Start: MIE coarse
MIFREADS=            103356929 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32299457 / Readout Complete: MIE coarse
MIFREADC=            103357647 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 444 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  222 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    3 / Observation number
IHDRCNT =                   35 / Number of headers currently in EDAC RAM
IIMGCNT =                   35 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25423192 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  735 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 445 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  223 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36353 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32299229 / Exposure Start Time: MIE coarse
MIFTIMES=            103356917 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32299229 / Exposure Complete: MIE coarse
MIFTIMEC=            103356918 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32299229 / Readout Start: MIE coarse
MIFREADS=            103356918 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32299233 / Readout Complete: MIE coarse
MIFREADC=            103356929 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 446 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  223 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    2 / Observation number
IHDRCNT =                   34 / Number of headers currently in EDAC RAM
IIMGCNT =                   34 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25385104 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  714 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                40216 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    2 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 447 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  224 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36352 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32299043 / Exposure Start Time: MIE coarse
MIFTIMES=            103356321 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32299043 / Exposure Complete: MIE coarse
MIFTIMEC=            103356321 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32299043 / Readout Start: MIE coarse
MIFREADS=            103356321 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32299229 / Readout Complete: MIE coarse
MIFREADC=            103356917 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 448 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  224 / extension version number
ROOTNAME= 'ibh719h0q                         ' / rootname of the observation set
EXPNAME = 'ibh719h0q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    1 / Observation number
IHDRCNT =                   33 / Number of headers currently in EDAC RAM
IIMGCNT =                   33 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25347016 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  693 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3277 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.27328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    4 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    1 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   17 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29405 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 449 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  225 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36383 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32305869 / Exposure Start Time: MIE coarse
MIFTIMES=            103378164 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32305869 / Exposure Complete: MIE coarse
MIFTIMEC=            103378165 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32305869 / Readout Start: MIE coarse
MIFREADS=            103378165 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32306093 / Readout Complete: MIE coarse
MIFREADC=            103378883 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 450 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  225 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   32 / Observation number
IHDRCNT =                   64 / Number of headers currently in EDAC RAM
IIMGCNT =                   64 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26527744 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1344 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.03976 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   95 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   95 / CS memory monitor #5
ICSMEM06=                   95 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   95 / CS memory monitor #9
ICSMEM10=                   95 / CS memory monitor #10
ICSMEM11=                   95 / CS memory monitor #11
ICSMEM12=                   95 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                   95 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 451 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  226 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36382 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32305644 / Exposure Start Time: MIE coarse
MIFTIMES=            103377446 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32305645 / Exposure Complete: MIE coarse
MIFTIMEC=            103377447 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32305645 / Readout Start: MIE coarse
MIFREADS=            103377447 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32305869 / Readout Complete: MIE coarse
MIFREADC=            103378164 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 452 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  226 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   31 / Observation number
IHDRCNT =                   63 / Number of headers currently in EDAC RAM
IIMGCNT =                   63 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26489656 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1323 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40273 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.01544 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   81 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   81 / CS memory monitor #5
ICSMEM06=                   81 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   81 / CS memory monitor #9
ICSMEM10=                   81 / CS memory monitor #10
ICSMEM11=                   81 / CS memory monitor #11
ICSMEM12=                   81 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                   81 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 453 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  227 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36381 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32305420 / Exposure Start Time: MIE coarse
MIFTIMES=            103376728 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32305420 / Exposure Complete: MIE coarse
MIFTIMEC=            103376729 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32305420 / Readout Start: MIE coarse
MIFREADS=            103376729 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32305644 / Readout Complete: MIE coarse
MIFREADC=            103377446 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 454 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  227 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   30 / Observation number
IHDRCNT =                   62 / Number of headers currently in EDAC RAM
IIMGCNT =                   62 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26451568 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1302 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40267 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.05922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 455 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  228 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36380 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32305196 / Exposure Start Time: MIE coarse
MIFTIMES=            103376010 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32305196 / Exposure Complete: MIE coarse
MIFTIMEC=            103376010 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32305196 / Readout Start: MIE coarse
MIFREADS=            103376010 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32305420 / Readout Complete: MIE coarse
MIFREADC=            103376728 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 456 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  228 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   29 / Observation number
IHDRCNT =                   61 / Number of headers currently in EDAC RAM
IIMGCNT =                   61 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26413480 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1281 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.05922 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.9886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 457 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  229 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36379 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32304971 / Exposure Start Time: MIE coarse
MIFTIMES=            103375292 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32304971 / Exposure Complete: MIE coarse
MIFTIMEC=            103375292 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32304971 / Readout Start: MIE coarse
MIFREADS=            103375292 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32305196 / Readout Complete: MIE coarse
MIFREADC=            103376010 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 458 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  229 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   28 / Observation number
IHDRCNT =                   60 / Number of headers currently in EDAC RAM
IIMGCNT =                   60 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26375392 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1260 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.06895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 459 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  230 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36378 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32304747 / Exposure Start Time: MIE coarse
MIFTIMES=            103374574 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32304747 / Exposure Complete: MIE coarse
MIFTIMEC=            103374574 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32304747 / Readout Start: MIE coarse
MIFREADS=            103374574 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32304971 / Readout Complete: MIE coarse
MIFREADC=            103375292 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 460 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  230 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   27 / Observation number
IHDRCNT =                   59 / Number of headers currently in EDAC RAM
IIMGCNT =                   59 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26337304 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1239 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =             0.002442 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.07382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   23 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   23 / CS memory monitor #5
ICSMEM06=                   23 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   23 / CS memory monitor #9
ICSMEM10=                   23 / CS memory monitor #10
ICSMEM11=                   23 / CS memory monitor #11
ICSMEM12=                   23 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                   23 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 461 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  231 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36377 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32304523 / Exposure Start Time: MIE coarse
MIFTIMES=            103373856 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32304523 / Exposure Complete: MIE coarse
MIFTIMEC=            103373857 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32304523 / Readout Start: MIE coarse
MIFREADS=            103373857 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32304747 / Readout Complete: MIE coarse
MIFREADC=            103374574 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 462 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  231 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   26 / Observation number
IHDRCNT =                   58 / Number of headers currently in EDAC RAM
IIMGCNT =                   58 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26299216 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1218 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.10301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    9 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    9 / CS memory monitor #5
ICSMEM06=                    9 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    9 / CS memory monitor #9
ICSMEM10=                    9 / CS memory monitor #10
ICSMEM11=                    9 / CS memory monitor #11
ICSMEM12=                    9 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29408 / Major frame count
IMINFCNT=                    9 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 463 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  232 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36376 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32304298 / Exposure Start Time: MIE coarse
MIFTIMES=            103373137 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32304298 / Exposure Complete: MIE coarse
MIFTIMEC=            103373138 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32304298 / Readout Start: MIE coarse
MIFREADS=            103373138 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32304523 / Readout Complete: MIE coarse
MIFREADC=            103373856 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 464 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  232 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   25 / Observation number
IHDRCNT =                   57 / Number of headers currently in EDAC RAM
IIMGCNT =                   57 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26261128 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1197 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.09814 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.02752 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  115 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  115 / CS memory monitor #5
ICSMEM06=                  115 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  115 / CS memory monitor #9
ICSMEM10=                  115 / CS memory monitor #10
ICSMEM11=                  115 / CS memory monitor #11
ICSMEM12=                  115 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                  115 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 465 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  233 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36375 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32304074 / Exposure Start Time: MIE coarse
MIFTIMES=            103372419 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32304074 / Exposure Complete: MIE coarse
MIFTIMEC=            103372420 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32304074 / Readout Start: MIE coarse
MIFREADS=            103372420 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32304298 / Readout Complete: MIE coarse
MIFREADC=            103373137 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 466 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  233 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   24 / Observation number
IHDRCNT =                   56 / Number of headers currently in EDAC RAM
IIMGCNT =                   56 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26223040 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1176 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.08841 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  100 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  100 / CS memory monitor #5
ICSMEM06=                  100 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  100 / CS memory monitor #9
ICSMEM10=                  100 / CS memory monitor #10
ICSMEM11=                  100 / CS memory monitor #11
ICSMEM12=                  100 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                  100 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 467 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  234 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36374 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32303849 / Exposure Start Time: MIE coarse
MIFTIMES=            103371701 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32303849 / Exposure Complete: MIE coarse
MIFTIMEC=            103371702 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32303849 / Readout Start: MIE coarse
MIFREADS=            103371702 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32304073 / Readout Complete: MIE coarse
MIFREADC=            103372419 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 468 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  234 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   23 / Observation number
IHDRCNT =                   55 / Number of headers currently in EDAC RAM
IIMGCNT =                   55 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26184952 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1155 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.1176 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   86 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   86 / CS memory monitor #5
ICSMEM06=                   86 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   86 / CS memory monitor #9
ICSMEM10=                   86 / CS memory monitor #10
ICSMEM11=                   86 / CS memory monitor #11
ICSMEM12=                   86 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   86 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 469 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  235 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36373 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32303625 / Exposure Start Time: MIE coarse
MIFTIMES=            103370983 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32303625 / Exposure Complete: MIE coarse
MIFTIMEC=            103370984 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32303625 / Readout Start: MIE coarse
MIFREADS=            103370984 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32303849 / Readout Complete: MIE coarse
MIFREADC=            103371701 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 470 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  235 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   22 / Observation number
IHDRCNT =                   54 / Number of headers currently in EDAC RAM
IIMGCNT =                   54 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26146864 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1134 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.11274 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 471 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  236 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36372 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32303400 / Exposure Start Time: MIE coarse
MIFTIMES=            103370265 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32303400 / Exposure Complete: MIE coarse
MIFTIMEC=            103370265 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32303400 / Readout Start: MIE coarse
MIFREADS=            103370265 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32303625 / Readout Complete: MIE coarse
MIFREADC=            103370983 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 472 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  236 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   21 / Observation number
IHDRCNT =                   53 / Number of headers currently in EDAC RAM
IIMGCNT =                   53 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26108776 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1113 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.45322 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.10301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   57 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   57 / CS memory monitor #5
ICSMEM06=                   57 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   57 / CS memory monitor #9
ICSMEM10=                   57 / CS memory monitor #10
ICSMEM11=                   57 / CS memory monitor #11
ICSMEM12=                   57 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   57 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 473 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  237 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36371 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32303176 / Exposure Start Time: MIE coarse
MIFTIMES=            103369547 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32303176 / Exposure Complete: MIE coarse
MIFTIMEC=            103369547 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32303176 / Readout Start: MIE coarse
MIFREADS=            103369547 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32303400 / Readout Complete: MIE coarse
MIFREADC=            103370265 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 474 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  237 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   20 / Observation number
IHDRCNT =                   52 / Number of headers currently in EDAC RAM
IIMGCNT =                   52 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26070688 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1092 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.13706 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   43 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   43 / CS memory monitor #5
ICSMEM06=                   43 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   43 / CS memory monitor #9
ICSMEM10=                   43 / CS memory monitor #10
ICSMEM11=                   43 / CS memory monitor #11
ICSMEM12=                   43 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   43 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 475 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  238 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36370 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32302951 / Exposure Start Time: MIE coarse
MIFTIMES=            103368829 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32302952 / Exposure Complete: MIE coarse
MIFTIMEC=            103368829 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32302952 / Readout Start: MIE coarse
MIFREADS=            103368829 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32303176 / Readout Complete: MIE coarse
MIFREADC=            103369547 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 476 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  238 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   19 / Observation number
IHDRCNT =                   51 / Number of headers currently in EDAC RAM
IIMGCNT =                   51 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26032600 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1071 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.11274 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.02752 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 477 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  239 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36369 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32302948 / Exposure Start Time: MIE coarse
MIFTIMES=            103368817 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32302948 / Exposure Complete: MIE coarse
MIFTIMEC=            103368818 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32302948 / Readout Start: MIE coarse
MIFREADS=            103368818 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32302951 / Readout Complete: MIE coarse
MIFREADC=            103368829 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 478 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  239 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   18 / Observation number
IHDRCNT =                   50 / Number of headers currently in EDAC RAM
IIMGCNT =                   50 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25994512 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1050 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                40230 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              16.6667 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.10787 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    4 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 479 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  240 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36368 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32302761 / Exposure Start Time: MIE coarse
MIFTIMES=            103368221 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32302762 / Exposure Complete: MIE coarse
MIFTIMEC=            103368221 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32302762 / Readout Start: MIE coarse
MIFREADS=            103368221 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32302948 / Readout Complete: MIE coarse
MIFREADC=            103368817 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 480 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  240 / extension version number
ROOTNAME= 'ibh719h1q                         ' / rootname of the observation set
EXPNAME = 'ibh719h1q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   17 / Observation number
IHDRCNT =                   49 / Number of headers currently in EDAC RAM
IIMGCNT =                   49 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             25956424 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1029 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3278 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.1322 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    6 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    3 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   23 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29407 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 481 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  241 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36399 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32309588 / Exposure Start Time: MIE coarse
MIFTIMES=            103390064 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32309588 / Exposure Complete: MIE coarse
MIFTIMEC=            103390065 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32309588 / Readout Start: MIE coarse
MIFREADS=            103390065 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32309812 / Readout Complete: MIE coarse
MIFREADC=            103390782 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 482 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  241 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   48 / Observation number
IHDRCNT =                   80 / Number of headers currently in EDAC RAM
IIMGCNT =                   80 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27137152 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1680 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.90841 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   93 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   93 / CS memory monitor #5
ICSMEM06=                   93 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   93 / CS memory monitor #9
ICSMEM10=                   93 / CS memory monitor #10
ICSMEM11=                   93 / CS memory monitor #11
ICSMEM12=                   93 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                   93 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 483 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  242 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36398 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32309363 / Exposure Start Time: MIE coarse
MIFTIMES=            103389346 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32309363 / Exposure Complete: MIE coarse
MIFTIMEC=            103389347 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32309363 / Readout Start: MIE coarse
MIFREADS=            103389347 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32309588 / Readout Complete: MIE coarse
MIFREADC=            103390064 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 484 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  242 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   47 / Observation number
IHDRCNT =                   79 / Number of headers currently in EDAC RAM
IIMGCNT =                   79 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27099064 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1659 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.89868 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.8913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   79 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   79 / CS memory monitor #5
ICSMEM06=                   79 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   79 / CS memory monitor #9
ICSMEM10=                   79 / CS memory monitor #10
ICSMEM11=                   79 / CS memory monitor #11
ICSMEM12=                   79 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                   79 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 485 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  243 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36397 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32309139 / Exposure Start Time: MIE coarse
MIFTIMES=            103388628 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32309139 / Exposure Complete: MIE coarse
MIFTIMEC=            103388629 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32309139 / Readout Start: MIE coarse
MIFREADS=            103388629 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32309363 / Readout Complete: MIE coarse
MIFREADC=            103389346 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 486 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  243 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   46 / Observation number
IHDRCNT =                   78 / Number of headers currently in EDAC RAM
IIMGCNT =                   78 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27060976 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1638 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 487 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  244 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36396 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32308914 / Exposure Start Time: MIE coarse
MIFTIMES=            103387910 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32308914 / Exposure Complete: MIE coarse
MIFTIMEC=            103387910 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32308915 / Readout Start: MIE coarse
MIFREADS=            103387910 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32309139 / Readout Complete: MIE coarse
MIFREADC=            103388628 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 488 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  244 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   45 / Observation number
IHDRCNT =                   77 / Number of headers currently in EDAC RAM
IIMGCNT =                   77 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27022888 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1617 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.95219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 489 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  245 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36395 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32308690 / Exposure Start Time: MIE coarse
MIFTIMES=            103387192 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32308690 / Exposure Complete: MIE coarse
MIFTIMEC=            103387192 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32308690 / Readout Start: MIE coarse
MIFREADS=            103387192 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32308914 / Readout Complete: MIE coarse
MIFREADC=            103387910 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 490 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  245 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   44 / Observation number
IHDRCNT =                   76 / Number of headers currently in EDAC RAM
IIMGCNT =                   76 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26984800 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1596 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.91328 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 491 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  246 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36394 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32308466 / Exposure Start Time: MIE coarse
MIFTIMES=            103386474 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32308466 / Exposure Complete: MIE coarse
MIFTIMEC=            103386474 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32308466 / Readout Start: MIE coarse
MIFREADS=            103386474 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32308690 / Readout Complete: MIE coarse
MIFREADC=            103387192 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 492 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  246 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   43 / Observation number
IHDRCNT =                   75 / Number of headers currently in EDAC RAM
IIMGCNT =                   75 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26946712 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1575 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.95706 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   21 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   21 / CS memory monitor #5
ICSMEM06=                   21 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   21 / CS memory monitor #9
ICSMEM10=                   21 / CS memory monitor #10
ICSMEM11=                   21 / CS memory monitor #11
ICSMEM12=                   21 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                   21 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 493 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  247 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36393 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32308241 / Exposure Start Time: MIE coarse
MIFTIMES=            103385756 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32308241 / Exposure Complete: MIE coarse
MIFTIMEC=            103385756 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32308241 / Readout Start: MIE coarse
MIFREADS=            103385756 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32308466 / Readout Complete: MIE coarse
MIFREADC=            103386474 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 494 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  247 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   42 / Observation number
IHDRCNT =                   74 / Number of headers currently in EDAC RAM
IIMGCNT =                   74 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26908624 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1554 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.96192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.92049 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    7 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    7 / CS memory monitor #5
ICSMEM06=                    7 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    7 / CS memory monitor #9
ICSMEM10=                    7 / CS memory monitor #10
ICSMEM11=                    7 / CS memory monitor #11
ICSMEM12=                    7 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29410 / Major frame count
IMINFCNT=                    7 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 495 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  248 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36392 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32308017 / Exposure Start Time: MIE coarse
MIFTIMES=            103385037 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32308017 / Exposure Complete: MIE coarse
MIFTIMEC=            103385038 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32308017 / Readout Start: MIE coarse
MIFREADS=            103385038 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32308241 / Readout Complete: MIE coarse
MIFREADC=            103385755 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 496 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  248 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   41 / Observation number
IHDRCNT =                   73 / Number of headers currently in EDAC RAM
IIMGCNT =                   73 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26870536 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1533 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.98138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  113 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  113 / CS memory monitor #5
ICSMEM06=                  113 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  113 / CS memory monitor #9
ICSMEM10=                  113 / CS memory monitor #10
ICSMEM11=                  113 / CS memory monitor #11
ICSMEM12=                  113 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                  113 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 497 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  249 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36391 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32307792 / Exposure Start Time: MIE coarse
MIFTIMES=            103384319 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32307792 / Exposure Complete: MIE coarse
MIFTIMEC=            103384320 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32307792 / Readout Start: MIE coarse
MIFREADS=            103384320 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32308017 / Readout Complete: MIE coarse
MIFREADC=            103385037 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 498 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  249 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   40 / Observation number
IHDRCNT =                   72 / Number of headers currently in EDAC RAM
IIMGCNT =                   72 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26832448 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1512 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.98138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   98 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   98 / CS memory monitor #5
ICSMEM06=                   98 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   98 / CS memory monitor #9
ICSMEM10=                   98 / CS memory monitor #10
ICSMEM11=                   98 / CS memory monitor #11
ICSMEM12=                   98 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   98 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 499 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  250 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36390 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32307568 / Exposure Start Time: MIE coarse
MIFTIMES=            103383601 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32307568 / Exposure Complete: MIE coarse
MIFTIMEC=            103383602 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32307568 / Readout Start: MIE coarse
MIFREADS=            103383602 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32307792 / Readout Complete: MIE coarse
MIFREADC=            103384319 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 500 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  250 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   39 / Observation number
IHDRCNT =                   71 / Number of headers currently in EDAC RAM
IIMGCNT =                   71 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26794360 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1491 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.97165 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 501 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  251 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36389 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32307343 / Exposure Start Time: MIE coarse
MIFTIMES=            103382883 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32307344 / Exposure Complete: MIE coarse
MIFTIMEC=            103382883 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32307344 / Readout Start: MIE coarse
MIFREADS=            103382883 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32307568 / Readout Complete: MIE coarse
MIFREADC=            103383601 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 502 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  251 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   38 / Observation number
IHDRCNT =                   70 / Number of headers currently in EDAC RAM
IIMGCNT =                   70 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26756272 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1470 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.99111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 503 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  252 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36388 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32307119 / Exposure Start Time: MIE coarse
MIFTIMES=            103382165 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32307119 / Exposure Complete: MIE coarse
MIFTIMEC=            103382165 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32307119 / Readout Start: MIE coarse
MIFREADS=            103382165 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32307343 / Readout Complete: MIE coarse
MIFREADC=            103382883 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 504 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  252 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   37 / Observation number
IHDRCNT =                   69 / Number of headers currently in EDAC RAM
IIMGCNT =                   69 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26718184 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1449 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.00084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   55 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   55 / CS memory monitor #5
ICSMEM06=                   55 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   55 / CS memory monitor #9
ICSMEM10=                   55 / CS memory monitor #10
ICSMEM11=                   55 / CS memory monitor #11
ICSMEM12=                   55 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   55 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 505 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  253 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36387 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32306895 / Exposure Start Time: MIE coarse
MIFTIMES=            103381447 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32306895 / Exposure Complete: MIE coarse
MIFTIMEC=            103381447 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32306895 / Readout Start: MIE coarse
MIFREADS=            103381447 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32307119 / Readout Complete: MIE coarse
MIFREADC=            103382165 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 506 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  253 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   36 / Observation number
IHDRCNT =                   68 / Number of headers currently in EDAC RAM
IIMGCNT =                   68 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26680096 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1428 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.99111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   41 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   41 / CS memory monitor #5
ICSMEM06=                   41 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   41 / CS memory monitor #9
ICSMEM10=                   41 / CS memory monitor #10
ICSMEM11=                   41 / CS memory monitor #11
ICSMEM12=                   41 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   41 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 507 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  254 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36386 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32306670 / Exposure Start Time: MIE coarse
MIFTIMES=            103380729 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32306670 / Exposure Complete: MIE coarse
MIFTIMEC=            103380729 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32306670 / Readout Start: MIE coarse
MIFREADS=            103380729 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32306895 / Readout Complete: MIE coarse
MIFREADC=            103381447 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 508 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  254 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   35 / Observation number
IHDRCNT =                   67 / Number of headers currently in EDAC RAM
IIMGCNT =                   67 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26642008 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1407 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.99111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 509 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  255 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36385 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32306667 / Exposure Start Time: MIE coarse
MIFTIMES=            103380717 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32306667 / Exposure Complete: MIE coarse
MIFTIMEC=            103380718 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32306667 / Readout Start: MIE coarse
MIFREADS=            103380718 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32306670 / Readout Complete: MIE coarse
MIFREADC=            103380729 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 510 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  255 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   34 / Observation number
IHDRCNT =                   66 / Number of headers currently in EDAC RAM
IIMGCNT =                   66 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26603920 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1386 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                40221 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.99111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    6 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 511 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  256 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36384 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32306480 / Exposure Start Time: MIE coarse
MIFTIMES=            103380121 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32306480 / Exposure Complete: MIE coarse
MIFTIMEC=            103380121 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32306480 / Readout Start: MIE coarse
MIFREADS=            103380121 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32306667 / Readout Complete: MIE coarse
MIFREADC=            103380717 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 512 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  256 / extension version number
ROOTNAME= 'ibh719h2q                         ' / rootname of the observation set
EXPNAME = 'ibh719h2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   33 / Observation number
IHDRCNT =                   65 / Number of headers currently in EDAC RAM
IIMGCNT =                   65 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             26565832 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1365 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3279 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              12.7802 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.00571 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                    8 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    5 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   29 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29409 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 513 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  257 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36415 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32313306 / Exposure Start Time: MIE coarse
MIFTIMES=            103401964 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32313307 / Exposure Complete: MIE coarse
MIFTIMEC=            103401965 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32313307 / Readout Start: MIE coarse
MIFREADS=            103401965 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32313531 / Readout Complete: MIE coarse
MIFREADC=            103402682 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 514 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  257 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   64 / Observation number
IHDRCNT =                   96 / Number of headers currently in EDAC RAM
IIMGCNT =                   96 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27746560 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2016 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.81111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.74535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   91 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   91 / CS memory monitor #5
ICSMEM06=                   91 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   91 / CS memory monitor #9
ICSMEM10=                   91 / CS memory monitor #10
ICSMEM11=                   91 / CS memory monitor #11
ICSMEM12=                   91 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                   91 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 515 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  258 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36414 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32313082 / Exposure Start Time: MIE coarse
MIFTIMES=            103401246 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32313082 / Exposure Complete: MIE coarse
MIFTIMEC=            103401247 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32313082 / Readout Start: MIE coarse
MIFREADS=            103401247 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32313306 / Readout Complete: MIE coarse
MIFREADC=            103401964 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 516 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  258 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   63 / Observation number
IHDRCNT =                   95 / Number of headers currently in EDAC RAM
IIMGCNT =                   95 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27708472 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1995 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.80138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.74535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   77 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   77 / CS memory monitor #5
ICSMEM06=                   77 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   77 / CS memory monitor #9
ICSMEM10=                   77 / CS memory monitor #10
ICSMEM11=                   77 / CS memory monitor #11
ICSMEM12=                   77 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=              15.3127 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                   77 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 517 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  259 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36413 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32312858 / Exposure Start Time: MIE coarse
MIFTIMES=            103400528 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32312858 / Exposure Complete: MIE coarse
MIFTIMEC=            103400528 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32312858 / Readout Start: MIE coarse
MIFREADS=            103400528 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32313082 / Readout Complete: MIE coarse
MIFREADC=            103401246 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 518 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  259 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   62 / Observation number
IHDRCNT =                   94 / Number of headers currently in EDAC RAM
IIMGCNT =                   94 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27670384 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1974 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.83544 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 519 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  260 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36412 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32312633 / Exposure Start Time: MIE coarse
MIFTIMES=            103399810 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32312633 / Exposure Complete: MIE coarse
MIFTIMEC=            103399810 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32312633 / Readout Start: MIE coarse
MIFREADS=            103399810 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32312858 / Readout Complete: MIE coarse
MIFREADC=            103400528 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 520 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  260 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   61 / Observation number
IHDRCNT =                   93 / Number of headers currently in EDAC RAM
IIMGCNT =                   93 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27632296 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1953 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.81598 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 521 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  261 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36411 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32312409 / Exposure Start Time: MIE coarse
MIFTIMES=            103399092 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32312409 / Exposure Complete: MIE coarse
MIFTIMEC=            103399092 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32312409 / Readout Start: MIE coarse
MIFREADS=            103399092 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32312633 / Readout Complete: MIE coarse
MIFREADC=            103399810 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 522 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  261 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   60 / Observation number
IHDRCNT =                   92 / Number of headers currently in EDAC RAM
IIMGCNT =                   92 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27594208 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1932 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.82571 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 523 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  262 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36410 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32312184 / Exposure Start Time: MIE coarse
MIFTIMES=            103398374 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32312184 / Exposure Complete: MIE coarse
MIFTIMEC=            103398374 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32312184 / Readout Start: MIE coarse
MIFREADS=            103398374 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32312409 / Readout Complete: MIE coarse
MIFREADC=            103399092 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 524 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  262 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   59 / Observation number
IHDRCNT =                   91 / Number of headers currently in EDAC RAM
IIMGCNT =                   91 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27556120 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1911 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.81111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   19 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   19 / CS memory monitor #5
ICSMEM06=                   19 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   19 / CS memory monitor #9
ICSMEM10=                   19 / CS memory monitor #10
ICSMEM11=                   19 / CS memory monitor #11
ICSMEM12=                   19 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                   19 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 525 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  263 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36409 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32311960 / Exposure Start Time: MIE coarse
MIFTIMES=            103397656 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32311960 / Exposure Complete: MIE coarse
MIFTIMEC=            103397657 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32311960 / Readout Start: MIE coarse
MIFREADS=            103397657 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32312184 / Readout Complete: MIE coarse
MIFREADC=            103398374 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 526 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  263 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   58 / Observation number
IHDRCNT =                   90 / Number of headers currently in EDAC RAM
IIMGCNT =                   90 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27518032 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1890 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.8403 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.78427 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    5 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    5 / CS memory monitor #5
ICSMEM06=                    5 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    5 / CS memory monitor #9
ICSMEM10=                    5 / CS memory monitor #10
ICSMEM11=                    5 / CS memory monitor #11
ICSMEM12=                    5 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29412 / Major frame count
IMINFCNT=                    5 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 527 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  264 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36408 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32311735 / Exposure Start Time: MIE coarse
MIFTIMES=            103396937 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32311736 / Exposure Complete: MIE coarse
MIFTIMEC=            103396938 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32311736 / Readout Start: MIE coarse
MIFREADS=            103396938 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32311960 / Readout Complete: MIE coarse
MIFREADC=            103397656 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 528 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  264 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   57 / Observation number
IHDRCNT =                   89 / Number of headers currently in EDAC RAM
IIMGCNT =                   89 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27479944 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1869 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               5.8549 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  111 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  111 / CS memory monitor #5
ICSMEM06=                  111 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  111 / CS memory monitor #9
ICSMEM10=                  111 / CS memory monitor #10
ICSMEM11=                  111 / CS memory monitor #11
ICSMEM12=                  111 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=              15.3127 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                  111 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 529 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  265 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36407 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32311511 / Exposure Start Time: MIE coarse
MIFTIMES=            103396219 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32311511 / Exposure Complete: MIE coarse
MIFTIMEC=            103396220 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32311511 / Readout Start: MIE coarse
MIFREADS=            103396220 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32311735 / Readout Complete: MIE coarse
MIFREADC=            103396937 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 530 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  265 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   56 / Observation number
IHDRCNT =                   88 / Number of headers currently in EDAC RAM
IIMGCNT =                   88 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27441856 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1848 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.86463 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.80373 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   96 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   96 / CS memory monitor #5
ICSMEM06=                   96 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   96 / CS memory monitor #9
ICSMEM10=                   96 / CS memory monitor #10
ICSMEM11=                   96 / CS memory monitor #11
ICSMEM12=                   96 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   96 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 531 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  266 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36406 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32311287 / Exposure Start Time: MIE coarse
MIFTIMES=            103395501 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32311287 / Exposure Complete: MIE coarse
MIFTIMEC=            103395501 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32311287 / Readout Start: MIE coarse
MIFREADS=            103395501 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32311511 / Readout Complete: MIE coarse
MIFREADC=            103396219 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 532 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  266 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   55 / Observation number
IHDRCNT =                   87 / Number of headers currently in EDAC RAM
IIMGCNT =                   87 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27403768 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1827 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.86949 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.794 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   82 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   82 / CS memory monitor #5
ICSMEM06=                   82 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   82 / CS memory monitor #9
ICSMEM10=                   82 / CS memory monitor #10
ICSMEM11=                   82 / CS memory monitor #11
ICSMEM12=                   82 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   82 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 533 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  267 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36405 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32311062 / Exposure Start Time: MIE coarse
MIFTIMES=            103394783 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32311062 / Exposure Complete: MIE coarse
MIFTIMEC=            103394783 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32311062 / Readout Start: MIE coarse
MIFREADS=            103394783 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32311287 / Readout Complete: MIE coarse
MIFREADC=            103395501 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 534 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  267 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   54 / Observation number
IHDRCNT =                   86 / Number of headers currently in EDAC RAM
IIMGCNT =                   86 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27365680 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1806 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.85976 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.80373 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   68 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   68 / CS memory monitor #5
ICSMEM06=                   68 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   68 / CS memory monitor #9
ICSMEM10=                   68 / CS memory monitor #10
ICSMEM11=                   68 / CS memory monitor #11
ICSMEM12=                   68 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   68 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 535 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  268 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36404 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32310838 / Exposure Start Time: MIE coarse
MIFTIMES=            103394065 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32310838 / Exposure Complete: MIE coarse
MIFTIMEC=            103394065 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32310838 / Readout Start: MIE coarse
MIFREADS=            103394065 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32311062 / Readout Complete: MIE coarse
MIFREADC=            103394783 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 536 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  268 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   53 / Observation number
IHDRCNT =                   85 / Number of headers currently in EDAC RAM
IIMGCNT =                   85 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27327592 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1785 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.87922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.82319 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   53 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   53 / CS memory monitor #5
ICSMEM06=                   53 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   53 / CS memory monitor #9
ICSMEM10=                   53 / CS memory monitor #10
ICSMEM11=                   53 / CS memory monitor #11
ICSMEM12=                   53 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   53 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 537 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  269 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36403 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32310613 / Exposure Start Time: MIE coarse
MIFTIMES=            103393347 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32310613 / Exposure Complete: MIE coarse
MIFTIMEC=            103393347 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32310613 / Readout Start: MIE coarse
MIFREADS=            103393347 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32310838 / Readout Complete: MIE coarse
MIFREADC=            103394065 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 538 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  269 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   52 / Observation number
IHDRCNT =                   84 / Number of headers currently in EDAC RAM
IIMGCNT =                   84 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27289504 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1764 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.87922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.82319 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   39 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   39 / CS memory monitor #5
ICSMEM06=                   39 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   39 / CS memory monitor #9
ICSMEM10=                   39 / CS memory monitor #10
ICSMEM11=                   39 / CS memory monitor #11
ICSMEM12=                   39 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   39 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 539 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  270 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36402 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32310389 / Exposure Start Time: MIE coarse
MIFTIMES=            103392629 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32310389 / Exposure Complete: MIE coarse
MIFTIMEC=            103392629 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32310389 / Readout Start: MIE coarse
MIFREADS=            103392629 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32310613 / Readout Complete: MIE coarse
MIFREADC=            103393347 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 540 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  270 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   51 / Observation number
IHDRCNT =                   83 / Number of headers currently in EDAC RAM
IIMGCNT =                   83 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27251416 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1743 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.89868 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 541 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  271 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36401 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32310385 / Exposure Start Time: MIE coarse
MIFTIMES=            103392617 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32310386 / Exposure Complete: MIE coarse
MIFTIMEC=            103392618 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32310386 / Readout Start: MIE coarse
MIFREADS=            103392618 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32310389 / Readout Complete: MIE coarse
MIFREADC=            103392629 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 542 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  271 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   50 / Observation number
IHDRCNT =                   82 / Number of headers currently in EDAC RAM
IIMGCNT =                   82 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27213328 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1722 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                40210 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.88409 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.8913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    8 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 543 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  272 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36400 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32310199 / Exposure Start Time: MIE coarse
MIFTIMES=            103392021 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32310199 / Exposure Complete: MIE coarse
MIFTIMEC=            103392021 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32310199 / Readout Start: MIE coarse
MIFREADS=            103392021 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32310385 / Readout Complete: MIE coarse
MIFREADC=            103392617 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 544 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  272 / extension version number
ROOTNAME= 'ibh719h3q                         ' / rootname of the observation set
EXPNAME = 'ibh719h3q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   49 / Observation number
IHDRCNT =                   81 / Number of headers currently in EDAC RAM
IIMGCNT =                   81 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27175240 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1701 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3280 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.88895 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.85238 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   10 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    7 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   35 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29411 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 545 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  273 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36431 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32317025 / Exposure Start Time: MIE coarse
MIFTIMES=            103413864 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32317025 / Exposure Complete: MIE coarse
MIFTIMEC=            103413865 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32317025 / Readout Start: MIE coarse
MIFREADS=            103413865 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32317250 / Readout Complete: MIE coarse
MIFREADC=            103414582 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 546 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  273 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   80 / Observation number
IHDRCNT =                  112 / Number of headers currently in EDAC RAM
IIMGCNT =                  112 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28355968 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2352 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.67489 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   89 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   89 / CS memory monitor #5
ICSMEM06=                   89 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   89 / CS memory monitor #9
ICSMEM10=                   89 / CS memory monitor #10
ICSMEM11=                   89 / CS memory monitor #11
ICSMEM12=                   89 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                   89 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 547 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  274 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36430 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32316801 / Exposure Start Time: MIE coarse
MIFTIMES=            103413146 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32316801 / Exposure Complete: MIE coarse
MIFTIMEC=            103413146 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32316801 / Readout Start: MIE coarse
MIFREADS=            103413146 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32317025 / Readout Complete: MIE coarse
MIFREADC=            103413864 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 548 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  274 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   79 / Observation number
IHDRCNT =                  111 / Number of headers currently in EDAC RAM
IIMGCNT =                  111 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28317880 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2331 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.70895 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   75 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   75 / CS memory monitor #5
ICSMEM06=                   75 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   75 / CS memory monitor #9
ICSMEM10=                   75 / CS memory monitor #10
ICSMEM11=                   75 / CS memory monitor #11
ICSMEM12=                   75 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                   75 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 549 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  275 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36429 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32316576 / Exposure Start Time: MIE coarse
MIFTIMES=            103412428 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32316577 / Exposure Complete: MIE coarse
MIFTIMEC=            103412429 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32316577 / Readout Start: MIE coarse
MIFREADS=            103412429 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32316801 / Readout Complete: MIE coarse
MIFREADC=            103413146 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 550 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  275 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   78 / Observation number
IHDRCNT =                  110 / Number of headers currently in EDAC RAM
IIMGCNT =                  110 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28279792 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2310 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.70895 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.68697 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 551 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  276 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36428 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32316352 / Exposure Start Time: MIE coarse
MIFTIMES=            103411710 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32316352 / Exposure Complete: MIE coarse
MIFTIMEC=            103411710 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32316352 / Readout Start: MIE coarse
MIFREADS=            103411710 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32316576 / Readout Complete: MIE coarse
MIFREADC=            103412428 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 552 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  276 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   77 / Observation number
IHDRCNT =                  109 / Number of headers currently in EDAC RAM
IIMGCNT =                  109 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28241704 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2289 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.70408 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.67724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 553 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  277 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36427 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32316127 / Exposure Start Time: MIE coarse
MIFTIMES=            103410992 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32316128 / Exposure Complete: MIE coarse
MIFTIMEC=            103410992 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32316128 / Readout Start: MIE coarse
MIFREADS=            103410992 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32316352 / Readout Complete: MIE coarse
MIFREADC=            103411710 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 554 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  277 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   76 / Observation number
IHDRCNT =                  108 / Number of headers currently in EDAC RAM
IIMGCNT =                  108 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28203616 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2268 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.72841 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.67724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 555 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  278 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36426 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32315903 / Exposure Start Time: MIE coarse
MIFTIMES=            103410273 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32315903 / Exposure Complete: MIE coarse
MIFTIMEC=            103410274 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32315903 / Readout Start: MIE coarse
MIFREADS=            103410274 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32316127 / Readout Complete: MIE coarse
MIFREADC=            103410992 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 556 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  278 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   75 / Observation number
IHDRCNT =                  107 / Number of headers currently in EDAC RAM
IIMGCNT =                  107 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28165528 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2247 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.69435 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.70643 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   17 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   17 / CS memory monitor #5
ICSMEM06=                   17 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   17 / CS memory monitor #9
ICSMEM10=                   17 / CS memory monitor #10
ICSMEM11=                   17 / CS memory monitor #11
ICSMEM12=                   17 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                   17 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 557 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  279 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36425 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32315679 / Exposure Start Time: MIE coarse
MIFTIMES=            103409555 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32315679 / Exposure Complete: MIE coarse
MIFTIMEC=            103409556 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32315679 / Readout Start: MIE coarse
MIFREADS=            103409556 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32315903 / Readout Complete: MIE coarse
MIFREADC=            103410273 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 558 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  279 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   74 / Observation number
IHDRCNT =                  106 / Number of headers currently in EDAC RAM
IIMGCNT =                  106 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28127440 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2226 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.74787 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.6967 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    3 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    3 / CS memory monitor #5
ICSMEM06=                    3 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    3 / CS memory monitor #9
ICSMEM10=                    3 / CS memory monitor #10
ICSMEM11=                    3 / CS memory monitor #11
ICSMEM12=                    3 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29414 / Major frame count
IMINFCNT=                    3 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 559 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  280 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36424 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32315454 / Exposure Start Time: MIE coarse
MIFTIMES=            103408837 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32315454 / Exposure Complete: MIE coarse
MIFTIMEC=            103408838 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32315454 / Readout Start: MIE coarse
MIFREADS=            103408838 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32315679 / Readout Complete: MIE coarse
MIFREADC=            103409555 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 560 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  280 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   73 / Observation number
IHDRCNT =                  105 / Number of headers currently in EDAC RAM
IIMGCNT =                  105 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28089352 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2205 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.74787 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.71616 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  109 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  109 / CS memory monitor #5
ICSMEM06=                  109 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  109 / CS memory monitor #9
ICSMEM10=                  109 / CS memory monitor #10
ICSMEM11=                  109 / CS memory monitor #11
ICSMEM12=                  109 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                  109 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 561 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  281 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36423 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32315230 / Exposure Start Time: MIE coarse
MIFTIMES=            103408119 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32315230 / Exposure Complete: MIE coarse
MIFTIMEC=            103408120 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32315230 / Readout Start: MIE coarse
MIFREADS=            103408120 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32315454 / Readout Complete: MIE coarse
MIFREADC=            103408837 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 562 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  281 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   72 / Observation number
IHDRCNT =                  104 / Number of headers currently in EDAC RAM
IIMGCNT =                  104 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28051264 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2184 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.76733 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.72589 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   94 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   94 / CS memory monitor #5
ICSMEM06=                   94 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   94 / CS memory monitor #9
ICSMEM10=                   94 / CS memory monitor #10
ICSMEM11=                   94 / CS memory monitor #11
ICSMEM12=                   94 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   94 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 563 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  282 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36422 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32315005 / Exposure Start Time: MIE coarse
MIFTIMES=            103407401 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32315005 / Exposure Complete: MIE coarse
MIFTIMEC=            103407401 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32315005 / Readout Start: MIE coarse
MIFREADS=            103407401 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32315230 / Readout Complete: MIE coarse
MIFREADC=            103408119 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 564 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  282 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   71 / Observation number
IHDRCNT =                  103 / Number of headers currently in EDAC RAM
IIMGCNT =                  103 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28013176 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2163 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.76733 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.71616 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 565 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  283 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36421 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32314781 / Exposure Start Time: MIE coarse
MIFTIMES=            103406683 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32314781 / Exposure Complete: MIE coarse
MIFTIMEC=            103406683 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32314781 / Readout Start: MIE coarse
MIFREADS=            103406683 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32315005 / Readout Complete: MIE coarse
MIFREADC=            103407401 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 566 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  283 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   70 / Observation number
IHDRCNT =                  102 / Number of headers currently in EDAC RAM
IIMGCNT =                  102 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27975088 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2142 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.77219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.73562 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 567 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  284 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36420 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32314557 / Exposure Start Time: MIE coarse
MIFTIMES=            103405965 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32314557 / Exposure Complete: MIE coarse
MIFTIMEC=            103405965 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32314557 / Readout Start: MIE coarse
MIFREADS=            103405965 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32314781 / Readout Complete: MIE coarse
MIFREADC=            103406683 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 568 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  284 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   69 / Observation number
IHDRCNT =                  101 / Number of headers currently in EDAC RAM
IIMGCNT =                  101 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27937000 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2121 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.78192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.72589 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   51 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   51 / CS memory monitor #5
ICSMEM06=                   51 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   51 / CS memory monitor #9
ICSMEM10=                   51 / CS memory monitor #10
ICSMEM11=                   51 / CS memory monitor #11
ICSMEM12=                   51 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   51 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 569 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  285 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36419 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32314332 / Exposure Start Time: MIE coarse
MIFTIMES=            103405247 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32314332 / Exposure Complete: MIE coarse
MIFTIMEC=            103405247 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32314332 / Readout Start: MIE coarse
MIFREADS=            103405247 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32314556 / Readout Complete: MIE coarse
MIFREADC=            103405965 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 570 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  285 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   68 / Observation number
IHDRCNT =                  100 / Number of headers currently in EDAC RAM
IIMGCNT =                  100 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27898912 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2100 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.53905 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.77219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   37 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   37 / CS memory monitor #5
ICSMEM06=                   37 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   37 / CS memory monitor #9
ICSMEM10=                   37 / CS memory monitor #10
ICSMEM11=                   37 / CS memory monitor #11
ICSMEM12=                   37 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   37 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 571 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  286 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36418 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32314108 / Exposure Start Time: MIE coarse
MIFTIMES=            103404528 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32314108 / Exposure Complete: MIE coarse
MIFTIMEC=            103404529 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32314108 / Readout Start: MIE coarse
MIFREADS=            103404529 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32314332 / Readout Complete: MIE coarse
MIFREADC=            103405246 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 572 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  286 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   67 / Observation number
IHDRCNT =                   99 / Number of headers currently in EDAC RAM
IIMGCNT =                   99 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27860824 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2079 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.77219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 573 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  287 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36417 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32314104 / Exposure Start Time: MIE coarse
MIFTIMES=            103404517 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32314104 / Exposure Complete: MIE coarse
MIFTIMEC=            103404518 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32314104 / Readout Start: MIE coarse
MIFREADS=            103404518 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32314108 / Readout Complete: MIE coarse
MIFREADC=            103404528 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                  0.1 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 574 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  287 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   66 / Observation number
IHDRCNT =                   98 / Number of headers currently in EDAC RAM
IIMGCNT =                   98 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27822736 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2058 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                40218 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.77219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   10 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 575 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  288 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36416 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32313918 / Exposure Start Time: MIE coarse
MIFTIMES=            103403920 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32313918 / Exposure Complete: MIE coarse
MIFTIMEC=            103403921 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32313918 / Readout Start: MIE coarse
MIFREADS=            103403921 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32314104 / Readout Complete: MIE coarse
MIFREADC=            103404517 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 576 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  288 / extension version number
ROOTNAME= 'ibh719h4q                         ' / rootname of the observation set
EXPNAME = 'ibh719h4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   65 / Observation number
IHDRCNT =                   97 / Number of headers currently in EDAC RAM
IIMGCNT =                   97 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             27784648 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2037 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3281 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.53905 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.80625 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   10 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   10 / CS memory monitor #5
ICSMEM06=                   10 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   10 / CS memory monitor #9
ICSMEM10=                   10 / CS memory monitor #10
ICSMEM11=                   10 / CS memory monitor #11
ICSMEM12=                   10 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   12 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                    9 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   41 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29413 / Major frame count
IMINFCNT=                   10 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 577 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  289 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36447 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32320744 / Exposure Start Time: MIE coarse
MIFTIMES=            103425764 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32320744 / Exposure Complete: MIE coarse
MIFTIMEC=            103425765 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32320744 / Readout Start: MIE coarse
MIFREADS=            103425765 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32320968 / Readout Complete: MIE coarse
MIFREADC=            103426482 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 578 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  289 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   96 / Observation number
IHDRCNT =                  128 / Number of headers currently in EDAC RAM
IIMGCNT =                  128 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28965376 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2688 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.61717 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.59219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.57995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   87 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   87 / CS memory monitor #5
ICSMEM06=                   87 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   87 / CS memory monitor #9
ICSMEM10=                   87 / CS memory monitor #10
ICSMEM11=                   87 / CS memory monitor #11
ICSMEM12=                   87 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                   87 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 579 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  290 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36446 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32320519 / Exposure Start Time: MIE coarse
MIFTIMES=            103425046 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32320520 / Exposure Complete: MIE coarse
MIFTIMEC=            103425046 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32320520 / Readout Start: MIE coarse
MIFREADS=            103425046 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32320744 / Readout Complete: MIE coarse
MIFREADC=            103425764 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 580 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  290 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   95 / Observation number
IHDRCNT =                  127 / Number of headers currently in EDAC RAM
IIMGCNT =                  127 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28927288 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2667 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.59705 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.58968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   73 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   73 / CS memory monitor #5
ICSMEM06=                   73 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   73 / CS memory monitor #9
ICSMEM10=                   73 / CS memory monitor #10
ICSMEM11=                   73 / CS memory monitor #11
ICSMEM12=                   73 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                   73 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 581 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  291 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36445 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32320295 / Exposure Start Time: MIE coarse
MIFTIMES=            103424328 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32320295 / Exposure Complete: MIE coarse
MIFTIMEC=            103424328 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32320295 / Readout Start: MIE coarse
MIFREADS=            103424328 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32320519 / Readout Complete: MIE coarse
MIFREADC=            103425046 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 582 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  291 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   94 / Observation number
IHDRCNT =                  126 / Number of headers currently in EDAC RAM
IIMGCNT =                  126 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28889200 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2646 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.58246 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.59941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 583 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  292 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36444 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32320071 / Exposure Start Time: MIE coarse
MIFTIMES=            103423610 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32320071 / Exposure Complete: MIE coarse
MIFTIMEC=            103423610 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32320071 / Readout Start: MIE coarse
MIFREADS=            103423610 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32320295 / Readout Complete: MIE coarse
MIFREADC=            103424328 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 584 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  292 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   93 / Observation number
IHDRCNT =                  125 / Number of headers currently in EDAC RAM
IIMGCNT =                  125 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28851112 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2625 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.62138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.58968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 585 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  293 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36443 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32319846 / Exposure Start Time: MIE coarse
MIFTIMES=            103422892 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32319846 / Exposure Complete: MIE coarse
MIFTIMEC=            103422892 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32319846 / Readout Start: MIE coarse
MIFREADS=            103422892 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32320071 / Readout Complete: MIE coarse
MIFREADC=            103423610 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 586 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  293 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   92 / Observation number
IHDRCNT =                  124 / Number of headers currently in EDAC RAM
IIMGCNT =                  124 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28813024 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2604 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.58732 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.59941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 587 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  294 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36442 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32319622 / Exposure Start Time: MIE coarse
MIFTIMES=            103422173 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32319622 / Exposure Complete: MIE coarse
MIFTIMEC=            103422174 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32319622 / Readout Start: MIE coarse
MIFREADS=            103422174 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32319846 / Readout Complete: MIE coarse
MIFREADC=            103422891 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 588 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  294 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   91 / Observation number
IHDRCNT =                  123 / Number of headers currently in EDAC RAM
IIMGCNT =                  123 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28774936 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2583 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.60192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.59941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   15 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   15 / CS memory monitor #5
ICSMEM06=                   15 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   15 / CS memory monitor #9
ICSMEM10=                   15 / CS memory monitor #10
ICSMEM11=                   15 / CS memory monitor #11
ICSMEM12=                   15 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                   15 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 589 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  295 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36441 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32319398 / Exposure Start Time: MIE coarse
MIFTIMES=            103421456 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32319398 / Exposure Complete: MIE coarse
MIFTIMEC=            103421456 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32319398 / Readout Start: MIE coarse
MIFREADS=            103421456 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32319622 / Readout Complete: MIE coarse
MIFREADC=            103422173 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 590 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  295 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   90 / Observation number
IHDRCNT =                  122 / Number of headers currently in EDAC RAM
IIMGCNT =                  122 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28736848 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2562 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.59705 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.61886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    1 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    1 / CS memory monitor #5
ICSMEM06=                    1 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    1 / CS memory monitor #9
ICSMEM10=                    1 / CS memory monitor #10
ICSMEM11=                    1 / CS memory monitor #11
ICSMEM12=                    1 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29416 / Major frame count
IMINFCNT=                    1 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 591 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  296 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36440 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32319173 / Exposure Start Time: MIE coarse
MIFTIMES=            103420737 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32319173 / Exposure Complete: MIE coarse
MIFTIMEC=            103420738 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32319173 / Readout Start: MIE coarse
MIFREADS=            103420738 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32319398 / Readout Complete: MIE coarse
MIFREADC=            103421456 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 592 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  296 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   89 / Observation number
IHDRCNT =                  121 / Number of headers currently in EDAC RAM
IIMGCNT =                  121 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28698760 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2541 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.61165 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.62859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  107 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  107 / CS memory monitor #5
ICSMEM06=                  107 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  107 / CS memory monitor #9
ICSMEM10=                  107 / CS memory monitor #10
ICSMEM11=                  107 / CS memory monitor #11
ICSMEM12=                  107 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                  107 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 593 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  297 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36439 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32318949 / Exposure Start Time: MIE coarse
MIFTIMES=            103420019 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32318949 / Exposure Complete: MIE coarse
MIFTIMEC=            103420019 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32318949 / Readout Start: MIE coarse
MIFREADS=            103420019 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32319173 / Readout Complete: MIE coarse
MIFREADC=            103420737 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 594 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  297 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   88 / Observation number
IHDRCNT =                  120 / Number of headers currently in EDAC RAM
IIMGCNT =                  120 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28660672 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2520 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7203 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.62624 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.62859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   92 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   92 / CS memory monitor #5
ICSMEM06=                   92 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   92 / CS memory monitor #9
ICSMEM10=                   92 / CS memory monitor #10
ICSMEM11=                   92 / CS memory monitor #11
ICSMEM12=                   92 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   92 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 595 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  298 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36438 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32318724 / Exposure Start Time: MIE coarse
MIFTIMES=            103419301 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32318724 / Exposure Complete: MIE coarse
MIFTIMEC=            103419301 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32318724 / Readout Start: MIE coarse
MIFREADS=            103419301 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32318948 / Readout Complete: MIE coarse
MIFREADC=            103420019 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 596 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  298 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   87 / Observation number
IHDRCNT =                  119 / Number of headers currently in EDAC RAM
IIMGCNT =                  119 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28622584 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2499 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.62624 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.62859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 597 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  299 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36437 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32318500 / Exposure Start Time: MIE coarse
MIFTIMES=            103418583 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32318500 / Exposure Complete: MIE coarse
MIFTIMEC=            103418583 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32318500 / Readout Start: MIE coarse
MIFREADS=            103418583 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32318724 / Readout Complete: MIE coarse
MIFREADC=            103419301 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 598 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  299 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   86 / Observation number
IHDRCNT =                  118 / Number of headers currently in EDAC RAM
IIMGCNT =                  118 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28584496 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2478 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.6457 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.63832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 599 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  300 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36436 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32318275 / Exposure Start Time: MIE coarse
MIFTIMES=            103417865 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32318275 / Exposure Complete: MIE coarse
MIFTIMEC=            103417865 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32318275 / Readout Start: MIE coarse
MIFREADS=            103417865 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32318500 / Readout Complete: MIE coarse
MIFREADC=            103418583 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 600 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  300 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   85 / Observation number
IHDRCNT =                  117 / Number of headers currently in EDAC RAM
IIMGCNT =                  117 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28546408 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2457 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.63111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   49 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   49 / CS memory monitor #5
ICSMEM06=                   49 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   49 / CS memory monitor #9
ICSMEM10=                   49 / CS memory monitor #10
ICSMEM11=                   49 / CS memory monitor #11
ICSMEM12=                   49 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   49 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 601 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  301 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36435 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32318051 / Exposure Start Time: MIE coarse
MIFTIMES=            103417146 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32318051 / Exposure Complete: MIE coarse
MIFTIMEC=            103417147 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32318051 / Readout Start: MIE coarse
MIFREADS=            103417147 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32318275 / Readout Complete: MIE coarse
MIFREADC=            103417865 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 602 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  301 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   84 / Observation number
IHDRCNT =                  116 / Number of headers currently in EDAC RAM
IIMGCNT =                  116 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28508320 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2436 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.6457 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.65778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   35 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   35 / CS memory monitor #5
ICSMEM06=                   35 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   35 / CS memory monitor #9
ICSMEM10=                   35 / CS memory monitor #10
ICSMEM11=                   35 / CS memory monitor #11
ICSMEM12=                   35 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   35 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 603 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  302 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36434 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32317827 / Exposure Start Time: MIE coarse
MIFTIMES=            103416429 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32317827 / Exposure Complete: MIE coarse
MIFTIMEC=            103416429 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32317827 / Readout Start: MIE coarse
MIFREADS=            103416429 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32318051 / Readout Complete: MIE coarse
MIFREADC=            103417146 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 604 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  302 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   83 / Observation number
IHDRCNT =                  115 / Number of headers currently in EDAC RAM
IIMGCNT =                  115 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28470232 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2415 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.67003 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 605 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  303 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36433 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32317823 / Exposure Start Time: MIE coarse
MIFTIMES=            103416417 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32317823 / Exposure Complete: MIE coarse
MIFTIMEC=            103416417 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32317823 / Readout Start: MIE coarse
MIFREADS=            103416418 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32317827 / Readout Complete: MIE coarse
MIFREADC=            103416429 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 606 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  303 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   82 / Observation number
IHDRCNT =                  114 / Number of headers currently in EDAC RAM
IIMGCNT =                  114 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28432144 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2394 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                40214 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.68462 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   12 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 607 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  304 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36432 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32317636 / Exposure Start Time: MIE coarse
MIFTIMES=            103415820 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32317637 / Exposure Complete: MIE coarse
MIFTIMEC=            103415821 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32317637 / Readout Start: MIE coarse
MIFREADS=            103415821 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32317823 / Readout Complete: MIE coarse
MIFREADC=            103416417 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 608 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  304 / extension version number
ROOTNAME= 'ibh719h5q                         ' / rootname of the observation set
EXPNAME = 'ibh719h5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   81 / Observation number
IHDRCNT =                  113 / Number of headers currently in EDAC RAM
IIMGCNT =                  113 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             28394056 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2373 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3282 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.69435 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.66751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    8 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    8 / CS memory monitor #5
ICSMEM06=                    8 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    8 / CS memory monitor #9
ICSMEM10=                    8 / CS memory monitor #10
ICSMEM11=                    8 / CS memory monitor #11
ICSMEM12=                    8 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=              15.3127 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   14 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   11 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   47 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29415 / Major frame count
IMINFCNT=                    8 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 609 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  305 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36463 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32324463 / Exposure Start Time: MIE coarse
MIFTIMES=            103437664 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32324463 / Exposure Complete: MIE coarse
MIFTIMEC=            103437664 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32324463 / Readout Start: MIE coarse
MIFREADS=            103437664 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32324687 / Readout Complete: MIE coarse
MIFREADC=            103438382 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 610 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  305 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  112 / Observation number
IHDRCNT =                  144 / Number of headers currently in EDAC RAM
IIMGCNT =                  144 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29574784 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3024 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.44137 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.47292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   85 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   85 / CS memory monitor #5
ICSMEM06=                   85 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   85 / CS memory monitor #9
ICSMEM10=                   85 / CS memory monitor #10
ICSMEM11=                   85 / CS memory monitor #11
ICSMEM12=                   85 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=              15.3127 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29418 / Major frame count
IMINFCNT=                   85 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 611 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  306 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36462 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32324238 / Exposure Start Time: MIE coarse
MIFTIMES=            103436946 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32324238 / Exposure Complete: MIE coarse
MIFTIMEC=            103436946 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32324238 / Readout Start: MIE coarse
MIFREADS=            103436946 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32324463 / Readout Complete: MIE coarse
MIFREADC=            103437664 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 612 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  306 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  111 / Observation number
IHDRCNT =                  143 / Number of headers currently in EDAC RAM
IIMGCNT =                  143 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29536696 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3003 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.4511 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.49238 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   71 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   71 / CS memory monitor #5
ICSMEM06=                   71 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   71 / CS memory monitor #9
ICSMEM10=                   71 / CS memory monitor #10
ICSMEM11=                   71 / CS memory monitor #11
ICSMEM12=                   71 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29418 / Major frame count
IMINFCNT=                   71 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 613 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  307 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36461 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32324014 / Exposure Start Time: MIE coarse
MIFTIMES=            103436228 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32324014 / Exposure Complete: MIE coarse
MIFTIMEC=            103436229 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32324014 / Readout Start: MIE coarse
MIFREADS=            103436229 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32324238 / Readout Complete: MIE coarse
MIFREADC=            103436946 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 614 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  307 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  110 / Observation number
IHDRCNT =                  142 / Number of headers currently in EDAC RAM
IIMGCNT =                  142 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29498608 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2982 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.51435 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.49238 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29418 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 615 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  308 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36460 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32323789 / Exposure Start Time: MIE coarse
MIFTIMES=            103435510 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32323790 / Exposure Complete: MIE coarse
MIFTIMEC=            103435510 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32323790 / Readout Start: MIE coarse
MIFREADS=            103435510 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32324014 / Readout Complete: MIE coarse
MIFREADC=            103436228 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 616 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  308 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  109 / Observation number
IHDRCNT =                  141 / Number of headers currently in EDAC RAM
IIMGCNT =                  141 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29460520 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2961 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.46083 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.50211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29418 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 617 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  309 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36459 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32323565 / Exposure Start Time: MIE coarse
MIFTIMES=            103434791 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32323565 / Exposure Complete: MIE coarse
MIFTIMEC=            103434792 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32323565 / Readout Start: MIE coarse
MIFREADS=            103434792 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32323789 / Readout Complete: MIE coarse
MIFREADC=            103435510 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 618 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  309 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  108 / Observation number
IHDRCNT =                  140 / Number of headers currently in EDAC RAM
IIMGCNT =                  140 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29422432 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2940 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.60931 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.47056 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.50211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29418 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 619 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  310 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36458 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32323341 / Exposure Start Time: MIE coarse
MIFTIMES=            103434073 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32323341 / Exposure Complete: MIE coarse
MIFTIMEC=            103434074 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32323341 / Readout Start: MIE coarse
MIFREADS=            103434074 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32323565 / Readout Complete: MIE coarse
MIFREADC=            103434791 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 620 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  310 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  107 / Observation number
IHDRCNT =                  139 / Number of headers currently in EDAC RAM
IIMGCNT =                  139 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29384344 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2919 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.50948 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.50211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   13 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   13 / CS memory monitor #5
ICSMEM06=                   13 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   13 / CS memory monitor #9
ICSMEM10=                   13 / CS memory monitor #10
ICSMEM11=                   13 / CS memory monitor #11
ICSMEM12=                   13 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29418 / Major frame count
IMINFCNT=                   13 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 621 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  311 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36457 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32323116 / Exposure Start Time: MIE coarse
MIFTIMES=            103433355 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32323116 / Exposure Complete: MIE coarse
MIFTIMEC=            103433356 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32323116 / Readout Start: MIE coarse
MIFREADS=            103433356 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32323341 / Readout Complete: MIE coarse
MIFREADC=            103434073 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 622 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  311 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  106 / Observation number
IHDRCNT =                  138 / Number of headers currently in EDAC RAM
IIMGCNT =                  138 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29346256 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2898 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.61717 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.48516 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.52157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  119 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  119 / CS memory monitor #5
ICSMEM06=                  119 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  119 / CS memory monitor #9
ICSMEM10=                  119 / CS memory monitor #10
ICSMEM11=                  119 / CS memory monitor #11
ICSMEM12=                  119 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                  119 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 623 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  312 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36456 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32322892 / Exposure Start Time: MIE coarse
MIFTIMES=            103432637 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32322892 / Exposure Complete: MIE coarse
MIFTIMEC=            103432638 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32322892 / Readout Start: MIE coarse
MIFREADS=            103432638 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32323116 / Readout Complete: MIE coarse
MIFREADC=            103433355 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 624 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  312 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  105 / Observation number
IHDRCNT =                  137 / Number of headers currently in EDAC RAM
IIMGCNT =                  137 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29308168 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2877 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.52894 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.50211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  105 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  105 / CS memory monitor #5
ICSMEM06=                  105 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  105 / CS memory monitor #9
ICSMEM10=                  105 / CS memory monitor #10
ICSMEM11=                  105 / CS memory monitor #11
ICSMEM12=                  105 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                  105 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 625 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  313 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36455 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32322667 / Exposure Start Time: MIE coarse
MIFTIMES=            103431919 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32322667 / Exposure Complete: MIE coarse
MIFTIMEC=            103431919 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32322667 / Readout Start: MIE coarse
MIFREADS=            103431919 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32322892 / Readout Complete: MIE coarse
MIFREADC=            103432637 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 626 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  313 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  104 / Observation number
IHDRCNT =                  136 / Number of headers currently in EDAC RAM
IIMGCNT =                  136 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29270080 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2856 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.53381 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.52157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   90 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   90 / CS memory monitor #5
ICSMEM06=                   90 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   90 / CS memory monitor #9
ICSMEM10=                   90 / CS memory monitor #10
ICSMEM11=                   90 / CS memory monitor #11
ICSMEM12=                   90 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   90 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 627 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  314 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36454 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32322443 / Exposure Start Time: MIE coarse
MIFTIMES=            103431201 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32322443 / Exposure Complete: MIE coarse
MIFTIMEC=            103431201 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32322443 / Readout Start: MIE coarse
MIFREADS=            103431201 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32322667 / Readout Complete: MIE coarse
MIFREADC=            103431919 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 628 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  314 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  103 / Observation number
IHDRCNT =                  135 / Number of headers currently in EDAC RAM
IIMGCNT =                  135 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29231992 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2835 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.49975 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.54103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 629 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  315 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36453 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32322218 / Exposure Start Time: MIE coarse
MIFTIMES=            103430483 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32322219 / Exposure Complete: MIE coarse
MIFTIMEC=            103430483 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32322219 / Readout Start: MIE coarse
MIFREADS=            103430483 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32322443 / Readout Complete: MIE coarse
MIFREADC=            103431201 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 630 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  315 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  102 / Observation number
IHDRCNT =                  134 / Number of headers currently in EDAC RAM
IIMGCNT =                  134 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29193904 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2814 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.09369 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.54354 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.51184 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 631 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  316 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36452 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32321994 / Exposure Start Time: MIE coarse
MIFTIMES=            103429765 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32321994 / Exposure Complete: MIE coarse
MIFTIMEC=            103429765 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32321994 / Readout Start: MIE coarse
MIFREADS=            103429765 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32322218 / Readout Complete: MIE coarse
MIFREADC=            103430483 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 632 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  316 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  101 / Observation number
IHDRCNT =                  133 / Number of headers currently in EDAC RAM
IIMGCNT =                  133 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29155816 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2793 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               5.5484 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.54103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   47 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   47 / CS memory monitor #5
ICSMEM06=                   47 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   47 / CS memory monitor #9
ICSMEM10=                   47 / CS memory monitor #10
ICSMEM11=                   47 / CS memory monitor #11
ICSMEM12=                   47 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   47 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 633 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  317 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36451 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32321770 / Exposure Start Time: MIE coarse
MIFTIMES=            103429046 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32321770 / Exposure Complete: MIE coarse
MIFTIMEC=            103429047 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32321770 / Readout Start: MIE coarse
MIFREADS=            103429047 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32321994 / Readout Complete: MIE coarse
MIFREADC=            103429764 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 634 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  317 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  100 / Observation number
IHDRCNT =                  132 / Number of headers currently in EDAC RAM
IIMGCNT =                  132 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29117728 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2772 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.55813 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.52157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   33 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   33 / CS memory monitor #5
ICSMEM06=                   33 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   33 / CS memory monitor #9
ICSMEM10=                   33 / CS memory monitor #10
ICSMEM11=                   33 / CS memory monitor #11
ICSMEM12=                   33 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   33 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 635 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  318 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36450 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32321545 / Exposure Start Time: MIE coarse
MIFTIMES=            103428328 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32321545 / Exposure Complete: MIE coarse
MIFTIMEC=            103428329 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32321545 / Readout Start: MIE coarse
MIFREADS=            103428329 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32321770 / Readout Complete: MIE coarse
MIFREADC=            103429046 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 636 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  318 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   99 / Observation number
IHDRCNT =                  131 / Number of headers currently in EDAC RAM
IIMGCNT =                  131 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29079640 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2751 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.58246 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.57022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 637 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  319 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36449 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32321542 / Exposure Start Time: MIE coarse
MIFTIMES=            103428317 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32321542 / Exposure Complete: MIE coarse
MIFTIMEC=            103428317 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32321542 / Readout Start: MIE coarse
MIFREADS=            103428317 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32321545 / Readout Complete: MIE coarse
MIFREADC=            103428328 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 638 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  319 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   98 / Observation number
IHDRCNT =                  130 / Number of headers currently in EDAC RAM
IIMGCNT =                  130 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29041552 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2730 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                40223 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.58246 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.57022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   14 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 639 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  320 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36448 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32321355 / Exposure Start Time: MIE coarse
MIFTIMES=            103427720 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32321355 / Exposure Complete: MIE coarse
MIFTIMEC=            103427721 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32321355 / Readout Start: MIE coarse
MIFREADS=            103427721 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32321542 / Readout Complete: MIE coarse
MIFREADC=            103428317 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 640 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  320 / extension version number
ROOTNAME= 'ibh719h6q                         ' / rootname of the observation set
EXPNAME = 'ibh719h6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   97 / Observation number
IHDRCNT =                  129 / Number of headers currently in EDAC RAM
IIMGCNT =                  129 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29003464 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2709 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3283 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.57273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.52157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    6 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    6 / CS memory monitor #5
ICSMEM06=                    6 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    6 / CS memory monitor #9
ICSMEM10=                    6 / CS memory monitor #10
ICSMEM11=                    6 / CS memory monitor #11
ICSMEM12=                    6 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   16 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   13 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   53 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29417 / Major frame count
IMINFCNT=                    6 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 641 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  321 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36479 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32328181 / Exposure Start Time: MIE coarse
MIFTIMES=            103449564 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32328182 / Exposure Complete: MIE coarse
MIFTIMEC=            103449564 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32328182 / Readout Start: MIE coarse
MIFREADS=            103449564 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32328406 / Readout Complete: MIE coarse
MIFREADC=            103450282 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 642 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  321 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  128 / Observation number
IHDRCNT =                  160 / Number of headers currently in EDAC RAM
IIMGCNT =                  160 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30184192 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3360 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.36353 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.34643 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   83 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   83 / CS memory monitor #5
ICSMEM06=                   83 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   83 / CS memory monitor #9
ICSMEM10=                   83 / CS memory monitor #10
ICSMEM11=                   83 / CS memory monitor #11
ICSMEM12=                   83 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29420 / Major frame count
IMINFCNT=                   83 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 643 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  322 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36478 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32327957 / Exposure Start Time: MIE coarse
MIFTIMES=            103448846 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32327957 / Exposure Complete: MIE coarse
MIFTIMEC=            103448846 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32327957 / Readout Start: MIE coarse
MIFREADS=            103448846 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32328181 / Readout Complete: MIE coarse
MIFREADC=            103449564 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 644 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  322 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  127 / Observation number
IHDRCNT =                  159 / Number of headers currently in EDAC RAM
IIMGCNT =                  159 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30146104 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3339 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.38299 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.32697 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   69 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   69 / CS memory monitor #5
ICSMEM06=                   69 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   69 / CS memory monitor #9
ICSMEM10=                   69 / CS memory monitor #10
ICSMEM11=                   69 / CS memory monitor #11
ICSMEM12=                   69 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29420 / Major frame count
IMINFCNT=                   69 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 645 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  323 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36477 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32327733 / Exposure Start Time: MIE coarse
MIFTIMES=            103448128 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32327733 / Exposure Complete: MIE coarse
MIFTIMEC=            103448128 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32327733 / Readout Start: MIE coarse
MIFREADS=            103448128 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32327957 / Readout Complete: MIE coarse
MIFREADC=            103448846 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 646 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  323 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  126 / Observation number
IHDRCNT =                  158 / Number of headers currently in EDAC RAM
IIMGCNT =                  158 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30108016 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3318 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.39272 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.34643 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29420 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 647 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  324 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36476 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32327508 / Exposure Start Time: MIE coarse
MIFTIMES=            103447410 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32327508 / Exposure Complete: MIE coarse
MIFTIMEC=            103447410 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32327508 / Readout Start: MIE coarse
MIFREADS=            103447410 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32327733 / Readout Complete: MIE coarse
MIFREADC=            103448128 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 648 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  324 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  125 / Observation number
IHDRCNT =                  157 / Number of headers currently in EDAC RAM
IIMGCNT =                  157 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30069928 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3297 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.38299 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.36589 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29420 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 649 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  325 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36475 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32327284 / Exposure Start Time: MIE coarse
MIFTIMES=            103446691 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32327284 / Exposure Complete: MIE coarse
MIFTIMEC=            103446692 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32327284 / Readout Start: MIE coarse
MIFREADS=            103446692 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32327508 / Readout Complete: MIE coarse
MIFREADC=            103447410 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 650 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  325 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  124 / Observation number
IHDRCNT =                  156 / Number of headers currently in EDAC RAM
IIMGCNT =                  156 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30031840 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3276 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.39759 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.34643 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29420 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 651 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  326 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36474 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32327059 / Exposure Start Time: MIE coarse
MIFTIMES=            103445973 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32327059 / Exposure Complete: MIE coarse
MIFTIMEC=            103445974 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32327059 / Readout Start: MIE coarse
MIFREADS=            103445974 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32327284 / Readout Complete: MIE coarse
MIFREADC=            103446691 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 652 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  326 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  123 / Observation number
IHDRCNT =                  155 / Number of headers currently in EDAC RAM
IIMGCNT =                  155 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29993752 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3255 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.41218 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.37562 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   11 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   11 / CS memory monitor #5
ICSMEM06=                   11 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   11 / CS memory monitor #9
ICSMEM10=                   11 / CS memory monitor #10
ICSMEM11=                   11 / CS memory monitor #11
ICSMEM12=                   11 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29420 / Major frame count
IMINFCNT=                   11 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 653 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  327 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36473 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32326835 / Exposure Start Time: MIE coarse
MIFTIMES=            103445256 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32326835 / Exposure Complete: MIE coarse
MIFTIMEC=            103445256 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32326835 / Readout Start: MIE coarse
MIFREADS=            103445256 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32327059 / Readout Complete: MIE coarse
MIFREADC=            103445973 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 654 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  327 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  122 / Observation number
IHDRCNT =                  154 / Number of headers currently in EDAC RAM
IIMGCNT =                  154 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29955664 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3234 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.40245 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.37562 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  117 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  117 / CS memory monitor #5
ICSMEM06=                  117 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  117 / CS memory monitor #9
ICSMEM10=                  117 / CS memory monitor #10
ICSMEM11=                  117 / CS memory monitor #11
ICSMEM12=                  117 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                  117 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 655 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  328 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36472 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32326610 / Exposure Start Time: MIE coarse
MIFTIMES=            103444537 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32326611 / Exposure Complete: MIE coarse
MIFTIMEC=            103444537 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32326611 / Readout Start: MIE coarse
MIFREADS=            103444537 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32326835 / Readout Complete: MIE coarse
MIFREADC=            103445256 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.19 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 656 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  328 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  121 / Observation number
IHDRCNT =                  153 / Number of headers currently in EDAC RAM
IIMGCNT =                  153 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29917576 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3213 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.42678 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.38535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  103 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  103 / CS memory monitor #5
ICSMEM06=                  103 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  103 / CS memory monitor #9
ICSMEM10=                  103 / CS memory monitor #10
ICSMEM11=                  103 / CS memory monitor #11
ICSMEM12=                  103 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                  103 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 657 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  329 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36471 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32326386 / Exposure Start Time: MIE coarse
MIFTIMES=            103443819 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32326386 / Exposure Complete: MIE coarse
MIFTIMEC=            103443819 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32326386 / Readout Start: MIE coarse
MIFREADS=            103443819 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32326610 / Readout Complete: MIE coarse
MIFREADC=            103444537 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 658 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  329 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  120 / Observation number
IHDRCNT =                  152 / Number of headers currently in EDAC RAM
IIMGCNT =                  152 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29879488 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3192 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.39272 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.40481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   88 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   88 / CS memory monitor #5
ICSMEM06=                   88 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   88 / CS memory monitor #9
ICSMEM10=                   88 / CS memory monitor #10
ICSMEM11=                   88 / CS memory monitor #11
ICSMEM12=                   88 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   88 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 659 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  330 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36470 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32326162 / Exposure Start Time: MIE coarse
MIFTIMES=            103443101 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32326162 / Exposure Complete: MIE coarse
MIFTIMEC=            103443101 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32326162 / Readout Start: MIE coarse
MIFREADS=            103443101 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32326386 / Readout Complete: MIE coarse
MIFREADC=            103443819 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 660 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  330 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  119 / Observation number
IHDRCNT =                  151 / Number of headers currently in EDAC RAM
IIMGCNT =                  151 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29841400 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3171 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.40732 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.41454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 661 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  331 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36469 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32325937 / Exposure Start Time: MIE coarse
MIFTIMES=            103442383 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32325937 / Exposure Complete: MIE coarse
MIFTIMEC=            103442383 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32325937 / Readout Start: MIE coarse
MIFREADS=            103442383 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32326162 / Readout Complete: MIE coarse
MIFREADC=            103443101 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 662 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  331 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  118 / Observation number
IHDRCNT =                  150 / Number of headers currently in EDAC RAM
IIMGCNT =                  150 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29803312 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3150 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.43651 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.41454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 663 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  332 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36468 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32325713 / Exposure Start Time: MIE coarse
MIFTIMES=            103441664 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32325713 / Exposure Complete: MIE coarse
MIFTIMEC=            103441665 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32325713 / Readout Start: MIE coarse
MIFREADS=            103441665 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32325937 / Readout Complete: MIE coarse
MIFREADC=            103442383 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 664 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  332 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  117 / Observation number
IHDRCNT =                  149 / Number of headers currently in EDAC RAM
IIMGCNT =                  149 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29765224 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3129 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.42191 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.41454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   45 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   45 / CS memory monitor #5
ICSMEM06=                   45 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   45 / CS memory monitor #9
ICSMEM10=                   45 / CS memory monitor #10
ICSMEM11=                   45 / CS memory monitor #11
ICSMEM12=                   45 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   45 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 665 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  333 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36467 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32325488 / Exposure Start Time: MIE coarse
MIFTIMES=            103440946 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32325488 / Exposure Complete: MIE coarse
MIFTIMEC=            103440947 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32325488 / Readout Start: MIE coarse
MIFREADS=            103440947 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32325713 / Readout Complete: MIE coarse
MIFREADC=            103441664 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 666 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  333 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  116 / Observation number
IHDRCNT =                  148 / Number of headers currently in EDAC RAM
IIMGCNT =                  148 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29727136 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3108 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.42678 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.41454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   31 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   31 / CS memory monitor #5
ICSMEM06=                   31 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   31 / CS memory monitor #9
ICSMEM10=                   31 / CS memory monitor #10
ICSMEM11=                   31 / CS memory monitor #11
ICSMEM12=                   31 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   31 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 667 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  334 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36466 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32325264 / Exposure Start Time: MIE coarse
MIFTIMES=            103440229 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32325264 / Exposure Complete: MIE coarse
MIFTIMEC=            103440229 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32325264 / Readout Start: MIE coarse
MIFREADS=            103440229 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32325488 / Readout Complete: MIE coarse
MIFREADC=            103440946 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 668 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  334 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  115 / Observation number
IHDRCNT =                  147 / Number of headers currently in EDAC RAM
IIMGCNT =                  147 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29689048 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3087 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.42191 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.434 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 669 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  335 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36465 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32325260 / Exposure Start Time: MIE coarse
MIFTIMES=            103440217 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32325261 / Exposure Complete: MIE coarse
MIFTIMEC=            103440217 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32325261 / Readout Start: MIE coarse
MIFREADS=            103440217 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32325264 / Readout Complete: MIE coarse
MIFREADC=            103440228 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 670 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  335 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  114 / Observation number
IHDRCNT =                  146 / Number of headers currently in EDAC RAM
IIMGCNT =                  146 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29650960 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3066 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                40212 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.41705 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.42427 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   16 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 671 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  336 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36464 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32325074 / Exposure Start Time: MIE coarse
MIFTIMES=            103439620 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32325074 / Exposure Complete: MIE coarse
MIFTIMEC=            103439621 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32325074 / Readout Start: MIE coarse
MIFREADS=            103439621 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32325260 / Readout Complete: MIE coarse
MIFREADC=            103440217 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 672 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  336 / extension version number
ROOTNAME= 'ibh719h7q                         ' / rootname of the observation set
EXPNAME = 'ibh719h7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  113 / Observation number
IHDRCNT =                  145 / Number of headers currently in EDAC RAM
IIMGCNT =                  145 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             29612872 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3045 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3284 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.43164 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.434 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    4 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    4 / CS memory monitor #5
ICSMEM06=                    4 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    4 / CS memory monitor #9
ICSMEM10=                    4 / CS memory monitor #10
ICSMEM11=                    4 / CS memory monitor #11
ICSMEM12=                    4 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   18 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   15 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   59 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29419 / Major frame count
IMINFCNT=                    4 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 673 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  337 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36495 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32331900 / Exposure Start Time: MIE coarse
MIFTIMES=            103461464 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32331900 / Exposure Complete: MIE coarse
MIFTIMEC=            103461464 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32331900 / Readout Start: MIE coarse
MIFREADS=            103461464 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32332125 / Readout Complete: MIE coarse
MIFREADC=            103462182 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 674 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  337 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  144 / Observation number
IHDRCNT =                  176 / Number of headers currently in EDAC RAM
IIMGCNT =                  176 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30793600 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3696 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.61717 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.26137 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.12264 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   81 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   81 / CS memory monitor #5
ICSMEM06=                   81 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   81 / CS memory monitor #9
ICSMEM10=                   81 / CS memory monitor #10
ICSMEM11=                   81 / CS memory monitor #11
ICSMEM12=                   81 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29422 / Major frame count
IMINFCNT=                   81 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 675 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  338 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36494 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32331676 / Exposure Start Time: MIE coarse
MIFTIMES=            103460746 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32331676 / Exposure Complete: MIE coarse
MIFTIMEC=            103460746 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32331676 / Readout Start: MIE coarse
MIFREADS=            103460746 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32331900 / Readout Complete: MIE coarse
MIFREADC=            103461464 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 676 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  338 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  143 / Observation number
IHDRCNT =                  175 / Number of headers currently in EDAC RAM
IIMGCNT =                  175 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30755512 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3675 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.26137 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.12264 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   67 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   67 / CS memory monitor #5
ICSMEM06=                   67 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   67 / CS memory monitor #9
ICSMEM10=                   67 / CS memory monitor #10
ICSMEM11=                   67 / CS memory monitor #11
ICSMEM12=                   67 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29422 / Major frame count
IMINFCNT=                   67 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 677 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  339 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36493 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32331451 / Exposure Start Time: MIE coarse
MIFTIMES=            103460028 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32331452 / Exposure Complete: MIE coarse
MIFTIMEC=            103460028 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32331452 / Readout Start: MIE coarse
MIFREADS=            103460028 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32331676 / Readout Complete: MIE coarse
MIFREADC=            103460746 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 678 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  339 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  142 / Observation number
IHDRCNT =                  174 / Number of headers currently in EDAC RAM
IIMGCNT =                  174 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30717424 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3654 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.24678 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.17129 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29422 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 679 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  340 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36492 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32331227 / Exposure Start Time: MIE coarse
MIFTIMES=            103459309 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32331227 / Exposure Complete: MIE coarse
MIFTIMEC=            103459310 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32331227 / Readout Start: MIE coarse
MIFREADS=            103459310 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32331451 / Readout Complete: MIE coarse
MIFREADC=            103460028 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 680 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  340 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  141 / Observation number
IHDRCNT =                  173 / Number of headers currently in EDAC RAM
IIMGCNT =                  173 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30679336 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3633 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.2857 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.12264 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29422 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 681 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  341 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36491 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32331002 / Exposure Start Time: MIE coarse
MIFTIMES=            103458591 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32331003 / Exposure Complete: MIE coarse
MIFTIMEC=            103458592 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32331003 / Readout Start: MIE coarse
MIFREADS=            103458592 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32331227 / Readout Complete: MIE coarse
MIFREADC=            103459309 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 682 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  341 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  140 / Observation number
IHDRCNT =                  172 / Number of headers currently in EDAC RAM
IIMGCNT =                  172 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30641248 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3612 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               5.2711 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.10318 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29422 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 683 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  342 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36490 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32330778 / Exposure Start Time: MIE coarse
MIFTIMES=            103457873 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32330778 / Exposure Complete: MIE coarse
MIFTIMEC=            103457874 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32330778 / Readout Start: MIE coarse
MIFREADS=            103457874 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32331002 / Readout Complete: MIE coarse
MIFREADC=            103458591 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 684 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  342 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  139 / Observation number
IHDRCNT =                  171 / Number of headers currently in EDAC RAM
IIMGCNT =                  171 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30603160 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3591 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.29543 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.11291 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    9 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    9 / CS memory monitor #5
ICSMEM06=                    9 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    9 / CS memory monitor #9
ICSMEM10=                    9 / CS memory monitor #10
ICSMEM11=                    9 / CS memory monitor #11
ICSMEM12=                    9 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29422 / Major frame count
IMINFCNT=                    9 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 685 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  343 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36489 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32330554 / Exposure Start Time: MIE coarse
MIFTIMES=            103457155 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32330554 / Exposure Complete: MIE coarse
MIFTIMEC=            103457156 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32330554 / Readout Start: MIE coarse
MIFREADS=            103457156 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32330778 / Readout Complete: MIE coarse
MIFREADC=            103457873 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 686 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  343 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  138 / Observation number
IHDRCNT =                  170 / Number of headers currently in EDAC RAM
IIMGCNT =                  170 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30565072 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3570 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.29543 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.17129 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  115 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  115 / CS memory monitor #5
ICSMEM06=                  115 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  115 / CS memory monitor #9
ICSMEM10=                  115 / CS memory monitor #10
ICSMEM11=                  115 / CS memory monitor #11
ICSMEM12=                  115 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                  115 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 687 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  344 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36488 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32330329 / Exposure Start Time: MIE coarse
MIFTIMES=            103456437 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32330329 / Exposure Complete: MIE coarse
MIFTIMEC=            103456437 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32330329 / Readout Start: MIE coarse
MIFREADS=            103456437 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32330554 / Readout Complete: MIE coarse
MIFREADC=            103457155 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 688 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  344 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  137 / Observation number
IHDRCNT =                  169 / Number of headers currently in EDAC RAM
IIMGCNT =                  169 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30526984 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3549 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.32462 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.21994 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  101 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  101 / CS memory monitor #5
ICSMEM06=                  101 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  101 / CS memory monitor #9
ICSMEM10=                  101 / CS memory monitor #10
ICSMEM11=                  101 / CS memory monitor #11
ICSMEM12=                  101 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                  101 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 689 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  345 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36487 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32330105 / Exposure Start Time: MIE coarse
MIFTIMES=            103455719 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32330105 / Exposure Complete: MIE coarse
MIFTIMEC=            103455719 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32330105 / Readout Start: MIE coarse
MIFREADS=            103455719 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32330329 / Readout Complete: MIE coarse
MIFREADC=            103456437 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 690 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  345 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  136 / Observation number
IHDRCNT =                  168 / Number of headers currently in EDAC RAM
IIMGCNT =                  168 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30488896 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3528 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.30516 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.22967 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   86 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   86 / CS memory monitor #5
ICSMEM06=                   86 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   86 / CS memory monitor #9
ICSMEM10=                   86 / CS memory monitor #10
ICSMEM11=                   86 / CS memory monitor #11
ICSMEM12=                   86 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   86 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 691 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  346 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36486 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32329880 / Exposure Start Time: MIE coarse
MIFTIMES=            103455001 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32329880 / Exposure Complete: MIE coarse
MIFTIMEC=            103455001 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32329880 / Readout Start: MIE coarse
MIFREADS=            103455001 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32330105 / Readout Complete: MIE coarse
MIFREADC=            103455719 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 692 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  346 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  135 / Observation number
IHDRCNT =                  167 / Number of headers currently in EDAC RAM
IIMGCNT =                  167 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30450808 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3507 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.31489 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.2394 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 693 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  347 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36485 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32329656 / Exposure Start Time: MIE coarse
MIFTIMES=            103454283 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32329656 / Exposure Complete: MIE coarse
MIFTIMEC=            103454283 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32329656 / Readout Start: MIE coarse
MIFREADS=            103454283 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32329880 / Readout Complete: MIE coarse
MIFREADC=            103455001 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 694 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  347 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  134 / Observation number
IHDRCNT =                  166 / Number of headers currently in EDAC RAM
IIMGCNT =                  166 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30412720 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3486 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.34408 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.27832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 695 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  348 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36484 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32329432 / Exposure Start Time: MIE coarse
MIFTIMES=            103453564 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32329432 / Exposure Complete: MIE coarse
MIFTIMEC=            103453565 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32329432 / Readout Start: MIE coarse
MIFREADS=            103453565 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32329656 / Readout Complete: MIE coarse
MIFREADC=            103454283 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 696 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  348 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  133 / Observation number
IHDRCNT =                  165 / Number of headers currently in EDAC RAM
IIMGCNT =                  165 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30374632 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3465 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.32462 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.26859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   43 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   43 / CS memory monitor #5
ICSMEM06=                   43 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   43 / CS memory monitor #9
ICSMEM10=                   43 / CS memory monitor #10
ICSMEM11=                   43 / CS memory monitor #11
ICSMEM12=                   43 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   43 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 697 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  349 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36483 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32329207 / Exposure Start Time: MIE coarse
MIFTIMES=            103452846 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32329207 / Exposure Complete: MIE coarse
MIFTIMEC=            103452847 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32329207 / Readout Start: MIE coarse
MIFREADS=            103452847 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32329431 / Readout Complete: MIE coarse
MIFREADC=            103453564 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 698 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  349 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  132 / Observation number
IHDRCNT =                  164 / Number of headers currently in EDAC RAM
IIMGCNT =                  164 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30336544 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3444 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.33435 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.31724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   29 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   29 / CS memory monitor #5
ICSMEM06=                   29 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   29 / CS memory monitor #9
ICSMEM10=                   29 / CS memory monitor #10
ICSMEM11=                   29 / CS memory monitor #11
ICSMEM12=                   29 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   29 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 699 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  350 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36482 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32328983 / Exposure Start Time: MIE coarse
MIFTIMES=            103452128 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32328983 / Exposure Complete: MIE coarse
MIFTIMEC=            103452129 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32328983 / Readout Start: MIE coarse
MIFREADS=            103452129 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32329207 / Readout Complete: MIE coarse
MIFREADC=            103452846 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 700 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  350 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  131 / Observation number
IHDRCNT =                  163 / Number of headers currently in EDAC RAM
IIMGCNT =                  163 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30298456 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3423 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=              -7.4218 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.32948 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.31724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 701 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  351 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36481 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32328979 / Exposure Start Time: MIE coarse
MIFTIMES=            103452117 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32328979 / Exposure Complete: MIE coarse
MIFTIMEC=            103452117 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32328979 / Readout Start: MIE coarse
MIFREADS=            103452117 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32328983 / Readout Complete: MIE coarse
MIFREADC=            103452128 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 702 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  351 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  130 / Observation number
IHDRCNT =                  162 / Number of headers currently in EDAC RAM
IIMGCNT =                  162 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30260368 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3402 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                40220 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=              -7.4218 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.32948 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.31724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   18 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 703 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  352 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36480 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32328793 / Exposure Start Time: MIE coarse
MIFTIMES=            103451520 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32328793 / Exposure Complete: MIE coarse
MIFTIMEC=            103451521 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32328793 / Readout Start: MIE coarse
MIFREADS=            103451521 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32328979 / Readout Complete: MIE coarse
MIFREADC=            103452117 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 704 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  352 / extension version number
ROOTNAME= 'ibh719h8q                         ' / rootname of the observation set
EXPNAME = 'ibh719h8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  129 / Observation number
IHDRCNT =                  161 / Number of headers currently in EDAC RAM
IIMGCNT =                  161 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30222280 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3381 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3285 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.34894 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.3367 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    2 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    2 / CS memory monitor #5
ICSMEM06=                    2 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    2 / CS memory monitor #9
ICSMEM10=                    2 / CS memory monitor #10
ICSMEM11=                    2 / CS memory monitor #11
ICSMEM12=                    2 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   20 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   17 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   65 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29421 / Major frame count
IMINFCNT=                    2 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 705 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  353 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36511 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32335619 / Exposure Start Time: MIE coarse
MIFTIMES=            103473364 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32335619 / Exposure Complete: MIE coarse
MIFTIMEC=            103473365 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32335619 / Readout Start: MIE coarse
MIFREADS=            103473365 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32335843 / Readout Complete: MIE coarse
MIFREADC=            103474082 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 706 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  353 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  160 / Observation number
IHDRCNT =                  192 / Number of headers currently in EDAC RAM
IIMGCNT =                  192 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31403008 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4032 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -35.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -41 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.13975 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.03507 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   79 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   79 / CS memory monitor #5
ICSMEM06=                   79 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   79 / CS memory monitor #9
ICSMEM10=                   79 / CS memory monitor #10
ICSMEM11=                   79 / CS memory monitor #11
ICSMEM12=                   79 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29424 / Major frame count
IMINFCNT=                   79 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 707 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  354 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36510 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32335395 / Exposure Start Time: MIE coarse
MIFTIMES=            103472646 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32335395 / Exposure Complete: MIE coarse
MIFTIMEC=            103472646 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32335395 / Readout Start: MIE coarse
MIFREADS=            103472646 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32335619 / Readout Complete: MIE coarse
MIFREADC=            103473364 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 708 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  354 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  159 / Observation number
IHDRCNT =                  191 / Number of headers currently in EDAC RAM
IIMGCNT =                  191 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31364920 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4011 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -35.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -41 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              5.16407 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.0448 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   65 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   65 / CS memory monitor #5
ICSMEM06=                   65 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   65 / CS memory monitor #9
ICSMEM10=                   65 / CS memory monitor #10
ICSMEM11=                   65 / CS memory monitor #11
ICSMEM12=                   65 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29424 / Major frame count
IMINFCNT=                   65 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 709 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  355 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36509 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32335170 / Exposure Start Time: MIE coarse
MIFTIMES=            103471928 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32335170 / Exposure Complete: MIE coarse
MIFTIMEC=            103471928 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32335170 / Readout Start: MIE coarse
MIFREADS=            103471928 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32335395 / Readout Complete: MIE coarse
MIFREADC=            103472646 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 710 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  355 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  158 / Observation number
IHDRCNT =                  190 / Number of headers currently in EDAC RAM
IIMGCNT =                  190 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31326832 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3990 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -35.8333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -41 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.14461 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.07399 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29424 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 711 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  356 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36508 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32334946 / Exposure Start Time: MIE coarse
MIFTIMES=            103471210 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32334946 / Exposure Complete: MIE coarse
MIFTIMEC=            103471210 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32334946 / Readout Start: MIE coarse
MIFREADS=            103471210 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32335170 / Readout Complete: MIE coarse
MIFREADC=            103471928 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 712 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  356 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  157 / Observation number
IHDRCNT =                  189 / Number of headers currently in EDAC RAM
IIMGCNT =                  189 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31288744 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3969 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.57811 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               5.1884 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.06426 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29424 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 713 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  357 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36507 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32334721 / Exposure Start Time: MIE coarse
MIFTIMES=            103470492 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32334721 / Exposure Complete: MIE coarse
MIFTIMEC=            103470492 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32334721 / Readout Start: MIE coarse
MIFREADS=            103470492 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32334946 / Readout Complete: MIE coarse
MIFREADC=            103471210 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 714 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  357 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  156 / Observation number
IHDRCNT =                  188 / Number of headers currently in EDAC RAM
IIMGCNT =                  188 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31250656 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3948 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.19326 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.08372 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29424 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 715 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  358 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36506 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32334497 / Exposure Start Time: MIE coarse
MIFTIMES=            103469773 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32334497 / Exposure Complete: MIE coarse
MIFTIMEC=            103469774 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32334497 / Readout Start: MIE coarse
MIFREADS=            103469774 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32334721 / Readout Complete: MIE coarse
MIFREADC=            103470492 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 716 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  358 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  155 / Observation number
IHDRCNT =                  187 / Number of headers currently in EDAC RAM
IIMGCNT =                  187 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31212568 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3927 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.21759 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.10318 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    7 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    7 / CS memory monitor #5
ICSMEM06=                    7 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    7 / CS memory monitor #9
ICSMEM10=                    7 / CS memory monitor #10
ICSMEM11=                    7 / CS memory monitor #11
ICSMEM12=                    7 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29424 / Major frame count
IMINFCNT=                    7 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 717 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  359 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36505 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32334273 / Exposure Start Time: MIE coarse
MIFTIMES=            103469056 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32334273 / Exposure Complete: MIE coarse
MIFTIMEC=            103469056 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32334273 / Readout Start: MIE coarse
MIFREADS=            103469057 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32334497 / Readout Complete: MIE coarse
MIFREADC=            103469773 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.16 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 718 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  359 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  154 / Observation number
IHDRCNT =                  186 / Number of headers currently in EDAC RAM
IIMGCNT =                  186 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31174480 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3906 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.20299 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.10318 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  113 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  113 / CS memory monitor #5
ICSMEM06=                  113 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  113 / CS memory monitor #9
ICSMEM10=                  113 / CS memory monitor #10
ICSMEM11=                  113 / CS memory monitor #11
ICSMEM12=                  113 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                  113 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 719 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  360 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36504 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32334048 / Exposure Start Time: MIE coarse
MIFTIMES=            103468337 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32334048 / Exposure Complete: MIE coarse
MIFTIMEC=            103468338 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32334048 / Readout Start: MIE coarse
MIFREADS=            103468338 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32334273 / Readout Complete: MIE coarse
MIFREADC=            103469056 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 720 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  360 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  153 / Observation number
IHDRCNT =                  185 / Number of headers currently in EDAC RAM
IIMGCNT =                  185 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31136392 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3885 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.20786 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.11291 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   99 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   99 / CS memory monitor #5
ICSMEM06=                   99 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   99 / CS memory monitor #9
ICSMEM10=                   99 / CS memory monitor #10
ICSMEM11=                   99 / CS memory monitor #11
ICSMEM12=                   99 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   99 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 721 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  361 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36503 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32333824 / Exposure Start Time: MIE coarse
MIFTIMES=            103467619 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32333824 / Exposure Complete: MIE coarse
MIFTIMEC=            103467620 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32333824 / Readout Start: MIE coarse
MIFREADS=            103467620 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32334048 / Readout Complete: MIE coarse
MIFREADC=            103468337 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 722 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  361 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  152 / Observation number
IHDRCNT =                  184 / Number of headers currently in EDAC RAM
IIMGCNT =                  184 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31098304 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3864 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.23218 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.11291 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 723 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  362 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36502 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32333599 / Exposure Start Time: MIE coarse
MIFTIMES=            103466901 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32333599 / Exposure Complete: MIE coarse
MIFTIMEC=            103466901 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32333599 / Readout Start: MIE coarse
MIFREADS=            103466901 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32333824 / Readout Complete: MIE coarse
MIFREADC=            103467619 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 724 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  362 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  151 / Observation number
IHDRCNT =                  183 / Number of headers currently in EDAC RAM
IIMGCNT =                  183 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31060216 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3843 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.22245 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.1421 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 725 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  363 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36501 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32333375 / Exposure Start Time: MIE coarse
MIFTIMES=            103466183 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32333375 / Exposure Complete: MIE coarse
MIFTIMEC=            103466183 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32333375 / Readout Start: MIE coarse
MIFREADS=            103466183 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32333599 / Readout Complete: MIE coarse
MIFREADC=            103466901 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 726 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  363 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  150 / Observation number
IHDRCNT =                  182 / Number of headers currently in EDAC RAM
IIMGCNT =                  182 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31022128 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3822 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.21759 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.13237 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 727 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  364 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36500 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32333150 / Exposure Start Time: MIE coarse
MIFTIMES=            103465465 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32333151 / Exposure Complete: MIE coarse
MIFTIMEC=            103465465 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32333151 / Readout Start: MIE coarse
MIFREADS=            103465465 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32333375 / Readout Complete: MIE coarse
MIFREADC=            103466183 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 728 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  364 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  149 / Observation number
IHDRCNT =                  181 / Number of headers currently in EDAC RAM
IIMGCNT =                  181 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30984040 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3801 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.6812 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.23705 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.15183 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   41 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   41 / CS memory monitor #5
ICSMEM06=                   41 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   41 / CS memory monitor #9
ICSMEM10=                   41 / CS memory monitor #10
ICSMEM11=                   41 / CS memory monitor #11
ICSMEM12=                   41 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   41 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 729 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  365 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36499 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32332926 / Exposure Start Time: MIE coarse
MIFTIMES=            103464747 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32332926 / Exposure Complete: MIE coarse
MIFTIMEC=            103464747 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32332926 / Readout Start: MIE coarse
MIFREADS=            103464747 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32333150 / Readout Complete: MIE coarse
MIFREADC=            103465465 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 730 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  365 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  148 / Observation number
IHDRCNT =                  180 / Number of headers currently in EDAC RAM
IIMGCNT =                  180 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30945952 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3780 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7008 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.22732 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.1421 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   27 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   27 / CS memory monitor #5
ICSMEM06=                   27 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   27 / CS memory monitor #9
ICSMEM10=                   27 / CS memory monitor #10
ICSMEM11=                   27 / CS memory monitor #11
ICSMEM12=                   27 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   27 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 731 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  366 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36498 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32332702 / Exposure Start Time: MIE coarse
MIFTIMES=            103464029 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32332702 / Exposure Complete: MIE coarse
MIFTIMEC=            103464029 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32332702 / Readout Start: MIE coarse
MIFREADS=            103464029 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32332926 / Readout Complete: MIE coarse
MIFREADC=            103464746 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 732 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  366 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  147 / Observation number
IHDRCNT =                  179 / Number of headers currently in EDAC RAM
IIMGCNT =                  179 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30907864 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3759 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83248 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.24191 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.15183 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 733 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  367 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36497 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32332698 / Exposure Start Time: MIE coarse
MIFTIMES=            103464017 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32332698 / Exposure Complete: MIE coarse
MIFTIMEC=            103464018 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32332698 / Readout Start: MIE coarse
MIFREADS=            103464018 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32332702 / Readout Complete: MIE coarse
MIFREADC=            103464029 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 734 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  367 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  146 / Observation number
IHDRCNT =                  178 / Number of headers currently in EDAC RAM
IIMGCNT =                  178 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30869776 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3738 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                40208 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83248 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.22732 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.16156 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   20 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 735 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  368 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36496 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32332512 / Exposure Start Time: MIE coarse
MIFTIMES=            103463420 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32332512 / Exposure Complete: MIE coarse
MIFTIMEC=            103463421 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32332512 / Readout Start: MIE coarse
MIFREADS=            103463421 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32332698 / Readout Complete: MIE coarse
MIFREADC=            103464017 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 736 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  368 / extension version number
ROOTNAME= 'ibh719h9q                         ' / rootname of the observation set
EXPNAME = 'ibh719h9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  145 / Observation number
IHDRCNT =                  177 / Number of headers currently in EDAC RAM
IIMGCNT =                  177 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             30831688 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3717 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3286 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10916.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83248 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.1429 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =            -0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                  -35 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -41 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=                    0 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -35.8333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -34.1667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.21759 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.15183 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    0 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    0 / CS memory monitor #5
ICSMEM06=                    0 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    0 / CS memory monitor #9
ICSMEM10=                    0 / CS memory monitor #10
ICSMEM11=                    0 / CS memory monitor #11
ICSMEM12=                    0 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  246 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  246 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   22 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   19 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   71 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29423 / Major frame count
IMINFCNT=                    0 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 737 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  369 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36527 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32426056 / Exposure Start Time: MIE coarse
MIFTIMES=            103762762 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32426057 / Exposure Complete: MIE coarse
MIFTIMEC=            103762762 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32426057 / Readout Start: MIE coarse
MIFREADS=            103762762 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32426281 / Readout Complete: MIE coarse
MIFREADC=            103763480 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 738 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  369 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  176 / Observation number
IHDRCNT =                   16 / Number of headers currently in EDAC RAM
IIMGCNT =                   16 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32012416 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  336 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40268 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4627 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.82571 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.78427 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  107 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  107 / CS memory monitor #5
ICSMEM06=                  107 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  107 / CS memory monitor #9
ICSMEM10=                  107 / CS memory monitor #10
ICSMEM11=                  107 / CS memory monitor #11
ICSMEM12=                  107 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                  107 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 739 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  370 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36526 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32425832 / Exposure Start Time: MIE coarse
MIFTIMES=            103762044 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32425832 / Exposure Complete: MIE coarse
MIFTIMEC=            103762044 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32425832 / Readout Start: MIE coarse
MIFREADS=            103762044 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32426056 / Readout Complete: MIE coarse
MIFREADC=            103762762 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 740 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  370 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  175 / Observation number
IHDRCNT =                   15 / Number of headers currently in EDAC RAM
IIMGCNT =                   15 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             31974328 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  315 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4627 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               5.8403 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.78427 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   93 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   93 / CS memory monitor #5
ICSMEM06=                   93 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   93 / CS memory monitor #9
ICSMEM10=                   93 / CS memory monitor #10
ICSMEM11=                   93 / CS memory monitor #11
ICSMEM12=                   93 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                   93 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 741 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  371 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36525 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32425608 / Exposure Start Time: MIE coarse
MIFTIMES=            103761326 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32425608 / Exposure Complete: MIE coarse
MIFTIMEC=            103761326 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32425608 / Readout Start: MIE coarse
MIFREADS=            103761326 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32425832 / Readout Complete: MIE coarse
MIFREADC=            103762044 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 742 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  371 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  183 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  174 / Observation number
IHDRCNT =                  206 / Number of headers currently in EDAC RAM
IIMGCNT =                  206 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31936240 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4326 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4822 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.81598 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.78427 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 743 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  372 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36524 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32425383 / Exposure Start Time: MIE coarse
MIFTIMES=            103760608 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32425383 / Exposure Complete: MIE coarse
MIFTIMEC=            103760608 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32425383 / Readout Start: MIE coarse
MIFREADS=            103760608 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32425608 / Readout Complete: MIE coarse
MIFREADC=            103761326 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 744 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  372 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  163 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  173 / Observation number
IHDRCNT =                  205 / Number of headers currently in EDAC RAM
IIMGCNT =                  205 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31898152 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4305 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.82084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 745 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  373 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36523 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32425159 / Exposure Start Time: MIE coarse
MIFTIMES=            103759889 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32425159 / Exposure Complete: MIE coarse
MIFTIMEC=            103759890 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32425159 / Readout Start: MIE coarse
MIFREADS=            103759890 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32425383 / Readout Complete: MIE coarse
MIFREADC=            103760608 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 746 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  373 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  143 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  172 / Observation number
IHDRCNT =                  204 / Number of headers currently in EDAC RAM
IIMGCNT =                  204 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31860064 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4284 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4822 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.83057 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 747 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  374 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36522 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32424934 / Exposure Start Time: MIE coarse
MIFTIMES=            103759171 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32424934 / Exposure Complete: MIE coarse
MIFTIMEC=            103759172 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32424934 / Readout Start: MIE coarse
MIFREADS=            103759172 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32425159 / Readout Complete: MIE coarse
MIFREADC=            103759889 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 748 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  374 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  124 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  171 / Observation number
IHDRCNT =                  203 / Number of headers currently in EDAC RAM
IIMGCNT =                  203 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31821976 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4263 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40267 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.1429 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.79652 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   35 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   35 / CS memory monitor #5
ICSMEM06=                   35 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   35 / CS memory monitor #9
ICSMEM10=                   35 / CS memory monitor #10
ICSMEM11=                   35 / CS memory monitor #11
ICSMEM12=                   35 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                   35 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 749 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  375 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36521 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32424710 / Exposure Start Time: MIE coarse
MIFTIMES=            103758453 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32424710 / Exposure Complete: MIE coarse
MIFTIMEC=            103758454 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32424710 / Readout Start: MIE coarse
MIFREADS=            103758454 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32424934 / Readout Complete: MIE coarse
MIFREADC=            103759171 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 750 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  375 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  104 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  170 / Observation number
IHDRCNT =                  202 / Number of headers currently in EDAC RAM
IIMGCNT =                  202 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31783888 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4242 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40271 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.82084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   21 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   21 / CS memory monitor #5
ICSMEM06=                   21 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   21 / CS memory monitor #9
ICSMEM10=                   21 / CS memory monitor #10
ICSMEM11=                   21 / CS memory monitor #11
ICSMEM12=                   21 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                   21 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 751 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  376 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36520 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32424485 / Exposure Start Time: MIE coarse
MIFTIMES=            103757735 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32424486 / Exposure Complete: MIE coarse
MIFTIMEC=            103757736 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32424486 / Readout Start: MIE coarse
MIFREADS=            103757736 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32424710 / Readout Complete: MIE coarse
MIFREADC=            103758453 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 752 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  376 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   84 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  169 / Observation number
IHDRCNT =                  201 / Number of headers currently in EDAC RAM
IIMGCNT =                  201 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31745800 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4221 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.80138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    7 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    7 / CS memory monitor #5
ICSMEM06=                    7 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    7 / CS memory monitor #9
ICSMEM10=                    7 / CS memory monitor #10
ICSMEM11=                    7 / CS memory monitor #11
ICSMEM12=                    7 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29472 / Major frame count
IMINFCNT=                    7 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 753 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  377 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36519 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32424261 / Exposure Start Time: MIE coarse
MIFTIMES=            103757017 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32424261 / Exposure Complete: MIE coarse
MIFTIMEC=            103757018 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32424261 / Readout Start: MIE coarse
MIFREADS=            103757018 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32424485 / Readout Complete: MIE coarse
MIFREADC=            103757735 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 754 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  377 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   65 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  168 / Observation number
IHDRCNT =                  200 / Number of headers currently in EDAC RAM
IIMGCNT =                  200 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31707712 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4200 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.54622 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              5.79652 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  112 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  112 / CS memory monitor #5
ICSMEM06=                  112 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  112 / CS memory monitor #9
ICSMEM10=                  112 / CS memory monitor #10
ICSMEM11=                  112 / CS memory monitor #11
ICSMEM12=                  112 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                  112 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 755 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  378 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36518 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32424037 / Exposure Start Time: MIE coarse
MIFTIMES=            103756299 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32424037 / Exposure Complete: MIE coarse
MIFTIMEC=            103756299 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32424037 / Readout Start: MIE coarse
MIFREADS=            103756299 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32424261 / Readout Complete: MIE coarse
MIFREADC=            103757017 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 756 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  378 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   45 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  167 / Observation number
IHDRCNT =                  199 / Number of headers currently in EDAC RAM
IIMGCNT =                  199 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31669624 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4179 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.57561 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -128.048 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.2821 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.78679 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   98 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   98 / CS memory monitor #5
ICSMEM06=                   98 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   98 / CS memory monitor #9
ICSMEM10=                   98 / CS memory monitor #10
ICSMEM11=                   98 / CS memory monitor #11
ICSMEM12=                   98 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   98 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 757 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  379 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36517 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32423812 / Exposure Start Time: MIE coarse
MIFTIMES=            103755581 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32423812 / Exposure Complete: MIE coarse
MIFTIMEC=            103755581 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32423812 / Readout Start: MIE coarse
MIFREADS=            103755581 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32424037 / Readout Complete: MIE coarse
MIFREADC=            103756299 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 758 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  379 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   25 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  166 / Observation number
IHDRCNT =                  198 / Number of headers currently in EDAC RAM
IIMGCNT =                  198 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31631536 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4158 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4822 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              5.78192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.74535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 759 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  380 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36516 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32423588 / Exposure Start Time: MIE coarse
MIFTIMES=            103754863 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32423588 / Exposure Complete: MIE coarse
MIFTIMEC=            103754863 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32423588 / Readout Start: MIE coarse
MIFREADS=            103754863 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32423812 / Readout Complete: MIE coarse
MIFREADC=            103755581 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 760 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  380 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                    6 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  165 / Observation number
IHDRCNT =                  197 / Number of headers currently in EDAC RAM
IIMGCNT =                  197 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31593448 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4137 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.77219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   69 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   69 / CS memory monitor #5
ICSMEM06=                   69 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   69 / CS memory monitor #9
ICSMEM10=                   69 / CS memory monitor #10
ICSMEM11=                   69 / CS memory monitor #11
ICSMEM12=                   69 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   28 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   26 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   80 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   69 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 761 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  381 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36515 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32423363 / Exposure Start Time: MIE coarse
MIFTIMES=            103754144 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32423363 / Exposure Complete: MIE coarse
MIFTIMEC=            103754145 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32423363 / Readout Start: MIE coarse
MIFREADS=            103754145 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32423588 / Readout Complete: MIE coarse
MIFREADC=            103754863 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 762 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  381 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  164 / Observation number
IHDRCNT =                  196 / Number of headers currently in EDAC RAM
IIMGCNT =                  196 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31555360 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4116 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40272 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5017 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.54622 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.77219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.74535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   55 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   55 / CS memory monitor #5
ICSMEM06=                   55 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   55 / CS memory monitor #9
ICSMEM10=                   55 / CS memory monitor #10
ICSMEM11=                   55 / CS memory monitor #11
ICSMEM12=                   55 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   27 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   25 / Number of normal MAR's processed by the FSW
ILASTNRM=                   69 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   79 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   55 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 763 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  382 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36514 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32423139 / Exposure Start Time: MIE coarse
MIFTIMES=            103753426 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32423139 / Exposure Complete: MIE coarse
MIFTIMEC=            103753427 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32423139 / Readout Start: MIE coarse
MIFREADS=            103753427 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32423363 / Readout Complete: MIE coarse
MIFREADC=            103754144 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 764 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  382 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  163 / Observation number
IHDRCNT =                  195 / Number of headers currently in EDAC RAM
IIMGCNT =                  195 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31517272 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4095 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40270 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.11765 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.6385 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              5.74787 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   26 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   24 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   79 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 765 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  383 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36513 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32423135 / Exposure Start Time: MIE coarse
MIFTIMES=            103753415 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32423136 / Exposure Complete: MIE coarse
MIFTIMEC=            103753415 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32423136 / Readout Start: MIE coarse
MIFREADS=            103753415 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32423139 / Readout Complete: MIE coarse
MIFREADC=            103753426 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 766 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  383 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  162 / Observation number
IHDRCNT =                  194 / Number of headers currently in EDAC RAM
IIMGCNT =                  194 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31479184 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4074 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                40228 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.11765 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.6385 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55109 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              5.74787 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   26 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   24 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   79 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 767 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  384 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36512 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32422949 / Exposure Start Time: MIE coarse
MIFTIMES=            103752818 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32422949 / Exposure Complete: MIE coarse
MIFTIMEC=            103752819 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32422949 / Readout Start: MIE coarse
MIFREADS=            103752819 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32423135 / Readout Complete: MIE coarse
MIFREADC=            103753415 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 768 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  384 / extension version number
ROOTNAME= 'ibh719i2q                         ' / rootname of the observation set
EXPNAME = 'ibh719i2q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  161 / Observation number
IHDRCNT =                  193 / Number of headers currently in EDAC RAM
IIMGCNT =                  193 / # of images currently stored in CS Buffer memor
IIMGEXTP=             24090112 / Pointer to Image Buffer space of next image
IIMGINSP=             31441096 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4053 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3287 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.11765 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.6385 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.73327 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.76481 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   26 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   23 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   79 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29471 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 769 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  385 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36543 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32429775 / Exposure Start Time: MIE coarse
MIFTIMES=            103774662 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32429775 / Exposure Complete: MIE coarse
MIFTIMEC=            103774662 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32429775 / Readout Start: MIE coarse
MIFREADS=            103774662 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32430000 / Readout Complete: MIE coarse
MIFREADC=            103775380 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 770 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  385 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  192 / Observation number
IHDRCNT =                   32 / Number of headers currently in EDAC RAM
IIMGCNT =                   32 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32621824 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  672 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.365 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.87184 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  105 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  105 / CS memory monitor #5
ICSMEM06=                  105 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  105 / CS memory monitor #9
ICSMEM10=                  105 / CS memory monitor #10
ICSMEM11=                  105 / CS memory monitor #11
ICSMEM12=                  105 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                  105 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 771 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  386 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36542 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32429551 / Exposure Start Time: MIE coarse
MIFTIMES=            103773944 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32429551 / Exposure Complete: MIE coarse
MIFTIMEC=            103773944 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32429551 / Readout Start: MIE coarse
MIFREADS=            103773944 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32429775 / Readout Complete: MIE coarse
MIFREADC=            103774662 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 772 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  386 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  191 / Observation number
IHDRCNT =                   31 / Number of headers currently in EDAC RAM
IIMGCNT =                   31 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32583736 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  651 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.365 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.55595 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.94733 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   91 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   91 / CS memory monitor #5
ICSMEM06=                   91 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   91 / CS memory monitor #9
ICSMEM10=                   91 / CS memory monitor #10
ICSMEM11=                   91 / CS memory monitor #11
ICSMEM12=                   91 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                   91 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 773 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  387 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36541 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32429326 / Exposure Start Time: MIE coarse
MIFTIMES=            103773226 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32429326 / Exposure Complete: MIE coarse
MIFTIMEC=            103773226 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32429326 / Readout Start: MIE coarse
MIFREADS=            103773226 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32429551 / Readout Complete: MIE coarse
MIFREADC=            103773944 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 774 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  387 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  190 / Observation number
IHDRCNT =                   30 / Number of headers currently in EDAC RAM
IIMGCNT =                   30 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32545648 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  630 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.365 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               5.9376 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 775 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  388 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36540 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32429102 / Exposure Start Time: MIE coarse
MIFTIMES=            103772508 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32429102 / Exposure Complete: MIE coarse
MIFTIMEC=            103772508 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32429102 / Readout Start: MIE coarse
MIFREADS=            103772508 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32429326 / Readout Complete: MIE coarse
MIFREADC=            103773226 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 776 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  388 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  189 / Observation number
IHDRCNT =                   29 / Number of headers currently in EDAC RAM
IIMGCNT =                   29 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32507560 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  609 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.89868 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.85238 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 777 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  389 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36539 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32428877 / Exposure Start Time: MIE coarse
MIFTIMES=            103771789 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32428878 / Exposure Complete: MIE coarse
MIFTIMEC=            103771790 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32428878 / Readout Start: MIE coarse
MIFREADS=            103771790 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32429102 / Readout Complete: MIE coarse
MIFREADC=            103772507 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 778 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  389 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  188 / Observation number
IHDRCNT =                   28 / Number of headers currently in EDAC RAM
IIMGCNT =                   28 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32469472 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  588 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3845 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 779 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  390 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36538 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32428653 / Exposure Start Time: MIE coarse
MIFTIMES=            103771071 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32428653 / Exposure Complete: MIE coarse
MIFTIMEC=            103771072 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32428653 / Readout Start: MIE coarse
MIFREADS=            103771072 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32428877 / Readout Complete: MIE coarse
MIFREADC=            103771789 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 780 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  390 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  187 / Observation number
IHDRCNT =                   27 / Number of headers currently in EDAC RAM
IIMGCNT =                   27 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32431384 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  567 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.88895 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.85238 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   33 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   33 / CS memory monitor #5
ICSMEM06=                   33 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   33 / CS memory monitor #9
ICSMEM10=                   33 / CS memory monitor #10
ICSMEM11=                   33 / CS memory monitor #11
ICSMEM12=                   33 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                   33 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 781 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  391 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36537 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32428429 / Exposure Start Time: MIE coarse
MIFTIMES=            103770353 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32428429 / Exposure Complete: MIE coarse
MIFTIMEC=            103770354 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32428429 / Readout Start: MIE coarse
MIFREADS=            103770354 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32428653 / Readout Complete: MIE coarse
MIFREADC=            103771071 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 782 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  391 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  186 / Observation number
IHDRCNT =                   26 / Number of headers currently in EDAC RAM
IIMGCNT =                   26 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32393296 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  546 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.92787 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   19 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   19 / CS memory monitor #5
ICSMEM06=                   19 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   19 / CS memory monitor #9
ICSMEM10=                   19 / CS memory monitor #10
ICSMEM11=                   19 / CS memory monitor #11
ICSMEM12=                   19 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                   19 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 783 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  392 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36536 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32428204 / Exposure Start Time: MIE coarse
MIFTIMES=            103769635 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32428204 / Exposure Complete: MIE coarse
MIFTIMEC=            103769635 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32428204 / Readout Start: MIE coarse
MIFREADS=            103769635 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32428429 / Readout Complete: MIE coarse
MIFREADC=            103770353 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 784 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  392 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  185 / Observation number
IHDRCNT =                   25 / Number of headers currently in EDAC RAM
IIMGCNT =                   25 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32355208 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  525 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.90841 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.86211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    5 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    5 / CS memory monitor #5
ICSMEM06=                    5 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    5 / CS memory monitor #9
ICSMEM10=                    5 / CS memory monitor #10
ICSMEM11=                    5 / CS memory monitor #11
ICSMEM12=                    5 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29474 / Major frame count
IMINFCNT=                    5 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 785 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  393 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36535 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32427980 / Exposure Start Time: MIE coarse
MIFTIMES=            103768917 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32427980 / Exposure Complete: MIE coarse
MIFTIMEC=            103768917 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32427980 / Readout Start: MIE coarse
MIFREADS=            103768917 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32428204 / Readout Complete: MIE coarse
MIFREADC=            103769635 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 786 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  393 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  184 / Observation number
IHDRCNT =                   24 / Number of headers currently in EDAC RAM
IIMGCNT =                   24 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32317120 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  504 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.38957 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.1429 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4041 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.91814 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  110 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  110 / CS memory monitor #5
ICSMEM06=                  110 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  110 / CS memory monitor #9
ICSMEM10=                  110 / CS memory monitor #10
ICSMEM11=                  110 / CS memory monitor #11
ICSMEM12=                  110 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                  110 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 787 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  394 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36534 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32427755 / Exposure Start Time: MIE coarse
MIFTIMES=            103768199 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32427755 / Exposure Complete: MIE coarse
MIFTIMEC=            103768199 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32427755 / Readout Start: MIE coarse
MIFREADS=            103768199 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32427980 / Readout Complete: MIE coarse
MIFREADC=            103768917 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 788 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  394 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  183 / Observation number
IHDRCNT =                   23 / Number of headers currently in EDAC RAM
IIMGCNT =                   23 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32279032 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  483 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4236 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.90841 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   96 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   96 / CS memory monitor #5
ICSMEM06=                   96 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   96 / CS memory monitor #9
ICSMEM10=                   96 / CS memory monitor #10
ICSMEM11=                   96 / CS memory monitor #11
ICSMEM12=                   96 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   96 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 789 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  395 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36533 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32427531 / Exposure Start Time: MIE coarse
MIFTIMES=            103767481 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32427531 / Exposure Complete: MIE coarse
MIFTIMEC=            103767481 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32427531 / Readout Start: MIE coarse
MIFREADS=            103767481 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32427755 / Readout Complete: MIE coarse
MIFREADC=            103768199 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 790 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  395 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  182 / Observation number
IHDRCNT =                   22 / Number of headers currently in EDAC RAM
IIMGCNT =                   22 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32240944 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  462 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.09369 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4431 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.89868 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   82 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   82 / CS memory monitor #5
ICSMEM06=                   82 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   82 / CS memory monitor #9
ICSMEM10=                   82 / CS memory monitor #10
ICSMEM11=                   82 / CS memory monitor #11
ICSMEM12=                   82 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   82 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 791 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  396 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36532 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32427307 / Exposure Start Time: MIE coarse
MIFTIMES=            103766762 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32427307 / Exposure Complete: MIE coarse
MIFTIMEC=            103766763 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32427307 / Readout Start: MIE coarse
MIFREADS=            103766763 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32427531 / Readout Complete: MIE coarse
MIFREADC=            103767481 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 792 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  396 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  181 / Observation number
IHDRCNT =                   21 / Number of headers currently in EDAC RAM
IIMGCNT =                   21 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32202856 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  441 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4236 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.90841 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   67 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   67 / CS memory monitor #5
ICSMEM06=                   67 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   67 / CS memory monitor #9
ICSMEM10=                   67 / CS memory monitor #10
ICSMEM11=                   67 / CS memory monitor #11
ICSMEM12=                   67 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   67 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 793 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  397 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36531 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32427082 / Exposure Start Time: MIE coarse
MIFTIMES=            103766044 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32427082 / Exposure Complete: MIE coarse
MIFTIMEC=            103766045 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32427082 / Readout Start: MIE coarse
MIFREADS=            103766045 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32427306 / Readout Complete: MIE coarse
MIFREADC=            103766762 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 794 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  397 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  180 / Observation number
IHDRCNT =                   20 / Number of headers currently in EDAC RAM
IIMGCNT =                   20 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32164768 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  420 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4431 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.88895 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   53 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   53 / CS memory monitor #5
ICSMEM06=                   53 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   53 / CS memory monitor #9
ICSMEM10=                   53 / CS memory monitor #10
ICSMEM11=                   53 / CS memory monitor #11
ICSMEM12=                   53 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   53 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 795 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  398 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36530 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32426858 / Exposure Start Time: MIE coarse
MIFTIMES=            103765326 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32426858 / Exposure Complete: MIE coarse
MIFTIMEC=            103765327 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32426858 / Readout Start: MIE coarse
MIFREADS=            103765327 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32427082 / Readout Complete: MIE coarse
MIFREADC=            103766044 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 796 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  398 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  179 / Observation number
IHDRCNT =                   19 / Number of headers currently in EDAC RAM
IIMGCNT =                   19 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32126680 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  399 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83248 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5994 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.86463 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 797 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  399 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36529 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32426854 / Exposure Start Time: MIE coarse
MIFTIMES=            103765315 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32426854 / Exposure Complete: MIE coarse
MIFTIMEC=            103765315 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32426854 / Readout Start: MIE coarse
MIFREADS=            103765315 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32426858 / Readout Complete: MIE coarse
MIFREADC=            103765326 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 798 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  399 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  178 / Observation number
IHDRCNT =                   18 / Number of headers currently in EDAC RAM
IIMGCNT =                   18 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32088592 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  378 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                40219 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83248 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5994 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.86463 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   28 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 799 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  400 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36528 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32426668 / Exposure Start Time: MIE coarse
MIFTIMES=            103764718 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32426668 / Exposure Complete: MIE coarse
MIFTIMEC=            103764719 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32426668 / Readout Start: MIE coarse
MIFREADS=            103764719 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32426854 / Readout Complete: MIE coarse
MIFREADC=            103765315 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 800 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  400 / extension version number
ROOTNAME= 'ibh719i4q                         ' / rootname of the observation set
EXPNAME = 'ibh719i4q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  177 / Observation number
IHDRCNT =                   17 / Number of headers currently in EDAC RAM
IIMGCNT =                   17 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32050504 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  357 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3288 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83248 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.5994 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.88409 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   30 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   27 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   86 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29473 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 801 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  401 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36559 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32433494 / Exposure Start Time: MIE coarse
MIFTIMES=            103786562 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32433494 / Exposure Complete: MIE coarse
MIFTIMEC=            103786562 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32433494 / Readout Start: MIE coarse
MIFREADS=            103786562 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32433718 / Readout Complete: MIE coarse
MIFREADC=            103787280 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 802 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  401 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  208 / Observation number
IHDRCNT =                   48 / Number of headers currently in EDAC RAM
IIMGCNT =                   48 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33231232 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1008 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2478 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.05436 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  103 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  103 / CS memory monitor #5
ICSMEM06=                  103 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  103 / CS memory monitor #9
ICSMEM10=                  103 / CS memory monitor #10
ICSMEM11=                  103 / CS memory monitor #11
ICSMEM12=                  103 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                  103 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 803 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  402 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36558 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32433269 / Exposure Start Time: MIE coarse
MIFTIMES=            103785844 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32433270 / Exposure Complete: MIE coarse
MIFTIMEC=            103785844 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32433270 / Readout Start: MIE coarse
MIFREADS=            103785844 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32433494 / Readout Complete: MIE coarse
MIFREADC=            103786562 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 804 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  402 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  207 / Observation number
IHDRCNT =                   47 / Number of headers currently in EDAC RAM
IIMGCNT =                   47 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33193144 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  987 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2282 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.04463 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   89 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   89 / CS memory monitor #5
ICSMEM06=                   89 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   89 / CS memory monitor #9
ICSMEM10=                   89 / CS memory monitor #10
ICSMEM11=                   89 / CS memory monitor #11
ICSMEM12=                   89 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                   89 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 805 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  403 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36557 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32433045 / Exposure Start Time: MIE coarse
MIFTIMES=            103785126 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32433045 / Exposure Complete: MIE coarse
MIFTIMEC=            103785126 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32433045 / Readout Start: MIE coarse
MIFREADS=            103785126 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32433269 / Readout Complete: MIE coarse
MIFREADC=            103785844 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 806 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  403 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  206 / Observation number
IHDRCNT =                   46 / Number of headers currently in EDAC RAM
IIMGCNT =                   46 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33155056 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  966 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2478 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.01544 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 807 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  404 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36556 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32432821 / Exposure Start Time: MIE coarse
MIFTIMES=            103784407 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32432821 / Exposure Complete: MIE coarse
MIFTIMEC=            103784408 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32432821 / Readout Start: MIE coarse
MIFREADS=            103784408 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32433045 / Readout Complete: MIE coarse
MIFREADC=            103785126 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 808 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  404 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  205 / Observation number
IHDRCNT =                   45 / Number of headers currently in EDAC RAM
IIMGCNT =                   45 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33116968 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  945 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2673 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.0349 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 809 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  405 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36555 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32432596 / Exposure Start Time: MIE coarse
MIFTIMES=            103783689 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32432596 / Exposure Complete: MIE coarse
MIFTIMEC=            103783690 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32432596 / Readout Start: MIE coarse
MIFREADS=            103783690 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32432821 / Readout Complete: MIE coarse
MIFREADC=            103784407 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 810 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  405 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  204 / Observation number
IHDRCNT =                   44 / Number of headers currently in EDAC RAM
IIMGCNT =                   44 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33078880 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  924 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2673 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.99598 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 811 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  406 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36554 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32432372 / Exposure Start Time: MIE coarse
MIFTIMES=            103782971 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32432372 / Exposure Complete: MIE coarse
MIFTIMEC=            103782972 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32432372 / Readout Start: MIE coarse
MIFREADS=            103782972 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32432596 / Readout Complete: MIE coarse
MIFREADC=            103783689 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 812 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  406 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  203 / Observation number
IHDRCNT =                   43 / Number of headers currently in EDAC RAM
IIMGCNT =                   43 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33040792 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  903 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2673 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.00084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   31 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   31 / CS memory monitor #5
ICSMEM06=                   31 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   31 / CS memory monitor #9
ICSMEM10=                   31 / CS memory monitor #10
ICSMEM11=                   31 / CS memory monitor #11
ICSMEM12=                   31 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                   31 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 813 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  407 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36553 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32432147 / Exposure Start Time: MIE coarse
MIFTIMES=            103782253 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32432148 / Exposure Complete: MIE coarse
MIFTIMEC=            103782254 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32432148 / Readout Start: MIE coarse
MIFREADS=            103782254 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32432372 / Readout Complete: MIE coarse
MIFREADC=            103782971 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 814 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  407 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  202 / Observation number
IHDRCNT =                   42 / Number of headers currently in EDAC RAM
IIMGCNT =                   42 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33002704 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  882 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56082 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.98138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   17 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   17 / CS memory monitor #5
ICSMEM06=                   17 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   17 / CS memory monitor #9
ICSMEM10=                   17 / CS memory monitor #10
ICSMEM11=                   17 / CS memory monitor #11
ICSMEM12=                   17 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                   17 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 815 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  408 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36552 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32431923 / Exposure Start Time: MIE coarse
MIFTIMES=            103781535 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32431923 / Exposure Complete: MIE coarse
MIFTIMEC=            103781535 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32431923 / Readout Start: MIE coarse
MIFREADS=            103781535 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32432147 / Readout Complete: MIE coarse
MIFREADC=            103782253 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 816 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  408 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  201 / Observation number
IHDRCNT =                   41 / Number of headers currently in EDAC RAM
IIMGCNT =                   41 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32964616 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  861 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2868 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.99111 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.92049 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    3 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    3 / CS memory monitor #5
ICSMEM06=                    3 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    3 / CS memory monitor #9
ICSMEM10=                    3 / CS memory monitor #10
ICSMEM11=                    3 / CS memory monitor #11
ICSMEM12=                    3 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29476 / Major frame count
IMINFCNT=                    3 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 817 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  409 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36551 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32431699 / Exposure Start Time: MIE coarse
MIFTIMES=            103780817 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32431699 / Exposure Complete: MIE coarse
MIFTIMEC=            103780817 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32431699 / Readout Start: MIE coarse
MIFREADS=            103780817 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32431923 / Readout Complete: MIE coarse
MIFREADC=            103781535 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 818 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  409 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  200 / Observation number
IHDRCNT =                   40 / Number of headers currently in EDAC RAM
IIMGCNT =                   40 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32926528 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  840 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3064 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.98138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  108 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  108 / CS memory monitor #5
ICSMEM06=                  108 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  108 / CS memory monitor #9
ICSMEM10=                  108 / CS memory monitor #10
ICSMEM11=                  108 / CS memory monitor #11
ICSMEM12=                  108 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                  108 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 819 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  410 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36550 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32431474 / Exposure Start Time: MIE coarse
MIFTIMES=            103780099 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32431474 / Exposure Complete: MIE coarse
MIFTIMEC=            103780099 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32431474 / Readout Start: MIE coarse
MIFREADS=            103780099 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32431699 / Readout Complete: MIE coarse
MIFREADC=            103780817 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 820 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  410 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  199 / Observation number
IHDRCNT =                   39 / Number of headers currently in EDAC RAM
IIMGCNT =                   39 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32888440 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  819 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3064 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.97652 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   94 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   94 / CS memory monitor #5
ICSMEM06=                   94 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   94 / CS memory monitor #9
ICSMEM10=                   94 / CS memory monitor #10
ICSMEM11=                   94 / CS memory monitor #11
ICSMEM12=                   94 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   94 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 821 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  411 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36549 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32431250 / Exposure Start Time: MIE coarse
MIFTIMES=            103779381 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32431250 / Exposure Complete: MIE coarse
MIFTIMEC=            103779381 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32431250 / Readout Start: MIE coarse
MIFREADS=            103779381 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32431474 / Readout Complete: MIE coarse
MIFREADC=            103780099 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 822 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  411 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  198 / Observation number
IHDRCNT =                   38 / Number of headers currently in EDAC RAM
IIMGCNT =                   38 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32850352 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  798 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3064 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.97165 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 823 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  412 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36548 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32431025 / Exposure Start Time: MIE coarse
MIFTIMES=            103778662 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32431025 / Exposure Complete: MIE coarse
MIFTIMEC=            103778663 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32431025 / Readout Start: MIE coarse
MIFREADS=            103778663 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32431250 / Readout Complete: MIE coarse
MIFREADC=            103779381 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 824 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  412 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  197 / Observation number
IHDRCNT =                   37 / Number of headers currently in EDAC RAM
IIMGCNT =                   37 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32812264 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  777 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3259 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              5.94246 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   65 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   65 / CS memory monitor #5
ICSMEM06=                   65 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   65 / CS memory monitor #9
ICSMEM10=                   65 / CS memory monitor #10
ICSMEM11=                   65 / CS memory monitor #11
ICSMEM12=                   65 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   65 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 825 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  413 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36547 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32430801 / Exposure Start Time: MIE coarse
MIFTIMES=            103777944 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32430801 / Exposure Complete: MIE coarse
MIFTIMEC=            103777945 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32430801 / Readout Start: MIE coarse
MIFREADS=            103777945 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32431025 / Readout Complete: MIE coarse
MIFREADC=            103778662 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 826 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  413 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  196 / Observation number
IHDRCNT =                   36 / Number of headers currently in EDAC RAM
IIMGCNT =                   36 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32774176 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  756 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3259 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.95706 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   51 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   51 / CS memory monitor #5
ICSMEM06=                   51 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   51 / CS memory monitor #9
ICSMEM10=                   51 / CS memory monitor #10
ICSMEM11=                   51 / CS memory monitor #11
ICSMEM12=                   51 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   51 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 827 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  414 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36546 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32430576 / Exposure Start Time: MIE coarse
MIFTIMES=            103777226 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32430577 / Exposure Complete: MIE coarse
MIFTIMEC=            103777227 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32430577 / Readout Start: MIE coarse
MIFREADS=            103777227 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32430801 / Readout Complete: MIE coarse
MIFREADC=            103777944 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 828 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  414 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  195 / Observation number
IHDRCNT =                   35 / Number of headers currently in EDAC RAM
IIMGCNT =                   35 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32736088 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  735 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4627 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.97652 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 829 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  415 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36545 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32430573 / Exposure Start Time: MIE coarse
MIFTIMES=            103777215 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32430573 / Exposure Complete: MIE coarse
MIFTIMEC=            103777215 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32430573 / Readout Start: MIE coarse
MIFREADS=            103777215 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32430576 / Readout Complete: MIE coarse
MIFREADC=            103777226 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 830 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  415 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  194 / Observation number
IHDRCNT =                   34 / Number of headers currently in EDAC RAM
IIMGCNT =                   34 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32698000 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  714 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                40213 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4627 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.97652 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   30 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 831 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  416 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36544 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32430386 / Exposure Start Time: MIE coarse
MIFTIMES=            103776618 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32430387 / Exposure Complete: MIE coarse
MIFTIMEC=            103776619 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32430387 / Readout Start: MIE coarse
MIFREADS=            103776619 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32430573 / Readout Complete: MIE coarse
MIFREADC=            103777215 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 832 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  416 / extension version number
ROOTNAME= 'ibh719i5q                         ' / rootname of the observation set
EXPNAME = 'ibh719i5q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  193 / Observation number
IHDRCNT =                   33 / Number of headers currently in EDAC RAM
IIMGCNT =                   33 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             32659912 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  693 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3289 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              17.8865 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3016 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6301 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.4627 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.98138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   32 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   29 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   92 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29475 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 833 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  417 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36575 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32437213 / Exposure Start Time: MIE coarse
MIFTIMES=            103798462 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32437213 / Exposure Complete: MIE coarse
MIFTIMEC=            103798462 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32437213 / Readout Start: MIE coarse
MIFREADS=            103798462 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32437437 / Readout Complete: MIE coarse
MIFREADC=            103799180 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 834 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  417 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  224 / Observation number
IHDRCNT =                   64 / Number of headers currently in EDAC RAM
IIMGCNT =                   64 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33840640 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1344 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.07868 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  101 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  101 / CS memory monitor #5
ICSMEM06=                  101 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  101 / CS memory monitor #9
ICSMEM10=                  101 / CS memory monitor #10
ICSMEM11=                  101 / CS memory monitor #11
ICSMEM12=                  101 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                  101 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 835 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  418 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36574 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32436988 / Exposure Start Time: MIE coarse
MIFTIMES=            103797744 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32436988 / Exposure Complete: MIE coarse
MIFTIMEC=            103797744 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32436988 / Readout Start: MIE coarse
MIFREADS=            103797744 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32437213 / Readout Complete: MIE coarse
MIFREADC=            103798462 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 836 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  418 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  223 / Observation number
IHDRCNT =                   63 / Number of headers currently in EDAC RAM
IIMGCNT =                   63 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33802552 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1323 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1305 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.08355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   87 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   87 / CS memory monitor #5
ICSMEM06=                   87 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   87 / CS memory monitor #9
ICSMEM10=                   87 / CS memory monitor #10
ICSMEM11=                   87 / CS memory monitor #11
ICSMEM12=                   87 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                   87 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 837 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  419 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36573 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32436764 / Exposure Start Time: MIE coarse
MIFTIMES=            103797026 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32436764 / Exposure Complete: MIE coarse
MIFTIMEC=            103797026 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32436764 / Readout Start: MIE coarse
MIFREADS=            103797026 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32436988 / Readout Complete: MIE coarse
MIFREADC=            103797744 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 838 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  419 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  222 / Observation number
IHDRCNT =                   62 / Number of headers currently in EDAC RAM
IIMGCNT =                   62 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33764464 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1302 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.11274 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 839 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  420 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36572 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32436539 / Exposure Start Time: MIE coarse
MIFTIMES=            103796307 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32436540 / Exposure Complete: MIE coarse
MIFTIMEC=            103796308 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32436540 / Readout Start: MIE coarse
MIFREADS=            103796308 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32436764 / Readout Complete: MIE coarse
MIFREADC=            103797026 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 840 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  420 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  221 / Observation number
IHDRCNT =                   61 / Number of headers currently in EDAC RAM
IIMGCNT =                   61 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33726376 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1281 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.06895 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 841 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  421 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36571 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32436315 / Exposure Start Time: MIE coarse
MIFTIMES=            103795589 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32436315 / Exposure Complete: MIE coarse
MIFTIMEC=            103795590 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32436315 / Readout Start: MIE coarse
MIFREADS=            103795590 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32436539 / Readout Complete: MIE coarse
MIFREADC=            103796307 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 842 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  421 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  220 / Observation number
IHDRCNT =                   60 / Number of headers currently in EDAC RAM
IIMGCNT =                   60 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33688288 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1260 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.07382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 843 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  422 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36570 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32436091 / Exposure Start Time: MIE coarse
MIFTIMES=            103794871 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32436091 / Exposure Complete: MIE coarse
MIFTIMEC=            103794872 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32436091 / Readout Start: MIE coarse
MIFREADS=            103794872 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32436315 / Readout Complete: MIE coarse
MIFREADC=            103795589 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 844 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  422 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  219 / Observation number
IHDRCNT =                   59 / Number of headers currently in EDAC RAM
IIMGCNT =                   59 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33650200 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1239 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.09328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.01779 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   29 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   29 / CS memory monitor #5
ICSMEM06=                   29 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   29 / CS memory monitor #9
ICSMEM10=                   29 / CS memory monitor #10
ICSMEM11=                   29 / CS memory monitor #11
ICSMEM12=                   29 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                   29 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 845 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  423 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36569 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32435866 / Exposure Start Time: MIE coarse
MIFTIMES=            103794153 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32435866 / Exposure Complete: MIE coarse
MIFTIMEC=            103794153 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32435866 / Readout Start: MIE coarse
MIFREADS=            103794153 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32436091 / Readout Complete: MIE coarse
MIFREADC=            103794871 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 846 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  423 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  218 / Observation number
IHDRCNT =                   58 / Number of headers currently in EDAC RAM
IIMGCNT =                   58 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33612112 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1218 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.61717 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.05436 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   15 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   15 / CS memory monitor #5
ICSMEM06=                   15 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   15 / CS memory monitor #9
ICSMEM10=                   15 / CS memory monitor #10
ICSMEM11=                   15 / CS memory monitor #11
ICSMEM12=                   15 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                   15 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 847 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  424 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36568 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32435642 / Exposure Start Time: MIE coarse
MIFTIMES=            103793435 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32435642 / Exposure Complete: MIE coarse
MIFTIMEC=            103793435 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32435642 / Readout Start: MIE coarse
MIFREADS=            103793435 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32435866 / Readout Complete: MIE coarse
MIFREADC=            103794153 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 848 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  424 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  217 / Observation number
IHDRCNT =                   57 / Number of headers currently in EDAC RAM
IIMGCNT =                   57 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33574024 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1197 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1696 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.56568 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.08355 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.9886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    1 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    1 / CS memory monitor #5
ICSMEM06=                    1 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    1 / CS memory monitor #9
ICSMEM10=                    1 / CS memory monitor #10
ICSMEM11=                    1 / CS memory monitor #11
ICSMEM12=                    1 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29478 / Major frame count
IMINFCNT=                    1 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 849 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  425 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36567 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32435417 / Exposure Start Time: MIE coarse
MIFTIMES=            103792717 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32435417 / Exposure Complete: MIE coarse
MIFTIMEC=            103792717 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32435417 / Readout Start: MIE coarse
MIFREADS=            103792717 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32435642 / Readout Complete: MIE coarse
MIFREADC=            103793435 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 850 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  425 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  216 / Observation number
IHDRCNT =                   56 / Number of headers currently in EDAC RAM
IIMGCNT =                   56 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33535936 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1176 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1892 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.08355 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  106 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  106 / CS memory monitor #5
ICSMEM06=                  106 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  106 / CS memory monitor #9
ICSMEM10=                  106 / CS memory monitor #10
ICSMEM11=                  106 / CS memory monitor #11
ICSMEM12=                  106 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                  106 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 851 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  426 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36566 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32435193 / Exposure Start Time: MIE coarse
MIFTIMES=            103791999 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32435193 / Exposure Complete: MIE coarse
MIFTIMEC=            103791999 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32435193 / Readout Start: MIE coarse
MIFREADS=            103791999 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32435417 / Readout Complete: MIE coarse
MIFREADC=            103792717 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 852 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  426 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  215 / Observation number
IHDRCNT =                   55 / Number of headers currently in EDAC RAM
IIMGCNT =                   55 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33497848 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1155 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1892 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.08841 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.9886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   92 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   92 / CS memory monitor #5
ICSMEM06=                   92 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   92 / CS memory monitor #9
ICSMEM10=                   92 / CS memory monitor #10
ICSMEM11=                   92 / CS memory monitor #11
ICSMEM12=                   92 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   92 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 853 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  427 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36565 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32434968 / Exposure Start Time: MIE coarse
MIFTIMES=            103791280 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32434969 / Exposure Complete: MIE coarse
MIFTIMEC=            103791281 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32434969 / Readout Start: MIE coarse
MIFREADS=            103791281 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32435193 / Readout Complete: MIE coarse
MIFREADC=            103791999 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 854 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  427 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  214 / Observation number
IHDRCNT =                   54 / Number of headers currently in EDAC RAM
IIMGCNT =                   54 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33459760 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1134 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1892 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.07382 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 855 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  428 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36564 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32434744 / Exposure Start Time: MIE coarse
MIFTIMES=            103790562 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32434744 / Exposure Complete: MIE coarse
MIFTIMEC=            103790563 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32434744 / Readout Start: MIE coarse
MIFREADS=            103790563 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32434968 / Readout Complete: MIE coarse
MIFREADC=            103791280 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 856 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  428 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  213 / Observation number
IHDRCNT =                   53 / Number of headers currently in EDAC RAM
IIMGCNT =                   53 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33421672 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1113 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.05922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.96914 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   63 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   63 / CS memory monitor #5
ICSMEM06=                   63 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   63 / CS memory monitor #9
ICSMEM10=                   63 / CS memory monitor #10
ICSMEM11=                   63 / CS memory monitor #11
ICSMEM12=                   63 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   63 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 857 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  429 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36563 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32434520 / Exposure Start Time: MIE coarse
MIFTIMES=            103789844 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32434520 / Exposure Complete: MIE coarse
MIFTIMEC=            103789845 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32434520 / Readout Start: MIE coarse
MIFREADS=            103789845 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32434744 / Readout Complete: MIE coarse
MIFREADC=            103790562 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 858 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  429 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  212 / Observation number
IHDRCNT =                   52 / Number of headers currently in EDAC RAM
IIMGCNT =                   52 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33383584 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1092 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.07868 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   49 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   49 / CS memory monitor #5
ICSMEM06=                   49 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   49 / CS memory monitor #9
ICSMEM10=                   49 / CS memory monitor #10
ICSMEM11=                   49 / CS memory monitor #11
ICSMEM12=                   49 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   49 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 859 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  430 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36562 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32434295 / Exposure Start Time: MIE coarse
MIFTIMES=            103789126 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32434295 / Exposure Complete: MIE coarse
MIFTIMEC=            103789126 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32434295 / Readout Start: MIE coarse
MIFREADS=            103789126 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32434520 / Readout Complete: MIE coarse
MIFREADC=            103789844 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 860 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  430 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  211 / Observation number
IHDRCNT =                   51 / Number of headers currently in EDAC RAM
IIMGCNT =                   51 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33345496 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1071 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3454 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.05436 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 861 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  431 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36561 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32434292 / Exposure Start Time: MIE coarse
MIFTIMES=            103789115 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32434292 / Exposure Complete: MIE coarse
MIFTIMEC=            103789115 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32434292 / Readout Start: MIE coarse
MIFREADS=            103789115 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32434295 / Readout Complete: MIE coarse
MIFREADC=            103789126 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 862 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  431 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  210 / Observation number
IHDRCNT =                   50 / Number of headers currently in EDAC RAM
IIMGCNT =                   50 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33307408 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1050 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                40212 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3454 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.05436 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   32 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 863 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  432 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36560 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32434105 / Exposure Start Time: MIE coarse
MIFTIMES=            103788518 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32434105 / Exposure Complete: MIE coarse
MIFTIMEC=            103788518 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32434105 / Readout Start: MIE coarse
MIFREADS=            103788518 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32434292 / Readout Complete: MIE coarse
MIFREADC=            103789115 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 864 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  432 / extension version number
ROOTNAME= 'ibh719i6q                         ' / rootname of the observation set
EXPNAME = 'ibh719i6q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  209 / Observation number
IHDRCNT =                   49 / Number of headers currently in EDAC RAM
IIMGCNT =                   49 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33269320 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1029 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3290 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6496 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.3454 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.0349 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   34 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   31 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                   98 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29477 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 865 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  433 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36591 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32440931 / Exposure Start Time: MIE coarse
MIFTIMES=            103810362 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32440932 / Exposure Complete: MIE coarse
MIFTIMEC=            103810362 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32440932 / Readout Start: MIE coarse
MIFREADS=            103810362 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32441156 / Readout Complete: MIE coarse
MIFREADC=            103811080 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 866 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  433 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  240 / Observation number
IHDRCNT =                   80 / Number of headers currently in EDAC RAM
IIMGCNT =                   80 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34450048 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1680 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0524 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.16139 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.31942 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   99 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   99 / CS memory monitor #5
ICSMEM06=                   99 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   99 / CS memory monitor #9
ICSMEM10=                   99 / CS memory monitor #10
ICSMEM11=                   99 / CS memory monitor #11
ICSMEM12=                   99 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   99 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 867 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  434 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36590 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32440707 / Exposure Start Time: MIE coarse
MIFTIMES=            103809644 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32440707 / Exposure Complete: MIE coarse
MIFTIMEC=            103809644 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32440707 / Readout Start: MIE coarse
MIFREADS=            103809644 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32440931 / Readout Complete: MIE coarse
MIFREADC=            103810362 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 868 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  434 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  239 / Observation number
IHDRCNT =                   79 / Number of headers currently in EDAC RAM
IIMGCNT =                   79 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34411960 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1659 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40236 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.19058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29996 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   85 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   85 / CS memory monitor #5
ICSMEM06=                   85 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   85 / CS memory monitor #9
ICSMEM10=                   85 / CS memory monitor #10
ICSMEM11=                   85 / CS memory monitor #11
ICSMEM12=                   85 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   85 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 869 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  435 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36589 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32440483 / Exposure Start Time: MIE coarse
MIFTIMES=            103808925 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32440483 / Exposure Complete: MIE coarse
MIFTIMEC=            103808926 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32440483 / Readout Start: MIE coarse
MIFREADS=            103808926 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32440707 / Readout Complete: MIE coarse
MIFREADC=            103809644 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 870 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  435 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  238 / Observation number
IHDRCNT =                   78 / Number of headers currently in EDAC RAM
IIMGCNT =                   78 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34373872 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1638 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.15166 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.2805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 871 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  436 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36588 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32440258 / Exposure Start Time: MIE coarse
MIFTIMES=            103808207 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32440258 / Exposure Complete: MIE coarse
MIFTIMEC=            103808208 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32440258 / Readout Start: MIE coarse
MIFREADS=            103808208 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32440483 / Readout Complete: MIE coarse
MIFREADC=            103808925 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 872 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  436 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  237 / Observation number
IHDRCNT =                   77 / Number of headers currently in EDAC RAM
IIMGCNT =                   77 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34335784 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1617 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.16139 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.2805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 873 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  437 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36587 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32440034 / Exposure Start Time: MIE coarse
MIFTIMES=            103807489 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32440034 / Exposure Complete: MIE coarse
MIFTIMEC=            103807490 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32440034 / Readout Start: MIE coarse
MIFREADS=            103807490 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32440258 / Readout Complete: MIE coarse
MIFREADC=            103808207 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 874 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  437 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  236 / Observation number
IHDRCNT =                   76 / Number of headers currently in EDAC RAM
IIMGCNT =                   76 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34297696 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1596 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.17598 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 875 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  438 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36586 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32439809 / Exposure Start Time: MIE coarse
MIFTIMES=            103806771 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32439809 / Exposure Complete: MIE coarse
MIFTIMEC=            103806771 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32439809 / Readout Start: MIE coarse
MIFREADS=            103806771 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32440034 / Readout Complete: MIE coarse
MIFREADC=            103807489 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 876 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  438 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  235 / Observation number
IHDRCNT =                   75 / Number of headers currently in EDAC RAM
IIMGCNT =                   75 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34259608 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1575 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.14679 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.19293 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   27 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   27 / CS memory monitor #5
ICSMEM06=                   27 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   27 / CS memory monitor #9
ICSMEM10=                   27 / CS memory monitor #10
ICSMEM11=                   27 / CS memory monitor #11
ICSMEM12=                   27 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   27 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 877 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  439 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36585 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32439585 / Exposure Start Time: MIE coarse
MIFTIMES=            103806053 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32439585 / Exposure Complete: MIE coarse
MIFTIMEC=            103806053 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32439585 / Readout Start: MIE coarse
MIFREADS=            103806053 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32439809 / Readout Complete: MIE coarse
MIFREADC=            103806771 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 878 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  439 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  234 / Observation number
IHDRCNT =                   74 / Number of headers currently in EDAC RAM
IIMGCNT =                   74 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34221520 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1554 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.15166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.19293 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   13 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   13 / CS memory monitor #5
ICSMEM06=                   13 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   13 / CS memory monitor #9
ICSMEM10=                   13 / CS memory monitor #10
ICSMEM11=                   13 / CS memory monitor #11
ICSMEM12=                   13 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29480 / Major frame count
IMINFCNT=                   13 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 879 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  440 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36584 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32439360 / Exposure Start Time: MIE coarse
MIFTIMES=            103805335 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32439361 / Exposure Complete: MIE coarse
MIFTIMEC=            103805335 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32439361 / Readout Start: MIE coarse
MIFREADS=            103805335 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32439585 / Readout Complete: MIE coarse
MIFREADC=            103806053 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 880 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  440 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  233 / Observation number
IHDRCNT =                   73 / Number of headers currently in EDAC RAM
IIMGCNT =                   73 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34183432 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1533 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0719 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.13706 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.15401 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  119 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  119 / CS memory monitor #5
ICSMEM06=                  119 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  119 / CS memory monitor #9
ICSMEM10=                  119 / CS memory monitor #10
ICSMEM11=                  119 / CS memory monitor #11
ICSMEM12=                  119 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                  119 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 881 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  441 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36583 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32439136 / Exposure Start Time: MIE coarse
MIFTIMES=            103804617 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32439136 / Exposure Complete: MIE coarse
MIFTIMEC=            103804617 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32439136 / Readout Start: MIE coarse
MIFREADS=            103804617 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32439360 / Readout Complete: MIE coarse
MIFREADC=            103805335 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 882 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  441 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  232 / Observation number
IHDRCNT =                   72 / Number of headers currently in EDAC RAM
IIMGCNT =                   72 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34145344 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1512 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.111 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.13706 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  104 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  104 / CS memory monitor #5
ICSMEM06=                  104 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  104 / CS memory monitor #9
ICSMEM10=                  104 / CS memory monitor #10
ICSMEM11=                  104 / CS memory monitor #11
ICSMEM12=                  104 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                  104 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 883 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  442 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36582 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32438912 / Exposure Start Time: MIE coarse
MIFTIMES=            103803898 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32438912 / Exposure Complete: MIE coarse
MIFTIMEC=            103803899 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32438912 / Readout Start: MIE coarse
MIFREADS=            103803899 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32439136 / Readout Complete: MIE coarse
MIFREADC=            103804617 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 884 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  442 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  231 / Observation number
IHDRCNT =                   71 / Number of headers currently in EDAC RAM
IIMGCNT =                   71 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34107256 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1491 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.15166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   90 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   90 / CS memory monitor #5
ICSMEM06=                   90 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   90 / CS memory monitor #9
ICSMEM10=                   90 / CS memory monitor #10
ICSMEM11=                   90 / CS memory monitor #11
ICSMEM12=                   90 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   90 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 885 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  443 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36581 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32438687 / Exposure Start Time: MIE coarse
MIFTIMES=            103803180 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32438687 / Exposure Complete: MIE coarse
MIFTIMEC=            103803181 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32438687 / Readout Start: MIE coarse
MIFREADS=            103803181 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32438912 / Readout Complete: MIE coarse
MIFREADC=            103803898 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 886 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  443 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  230 / Observation number
IHDRCNT =                   70 / Number of headers currently in EDAC RAM
IIMGCNT =                   70 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34069168 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1470 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=               6.1176 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 887 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  444 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36580 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32438463 / Exposure Start Time: MIE coarse
MIFTIMES=            103802462 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32438463 / Exposure Complete: MIE coarse
MIFTIMEC=            103802463 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32438463 / Readout Start: MIE coarse
MIFREADS=            103802463 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32438687 / Readout Complete: MIE coarse
MIFREADC=            103803180 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 888 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  444 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  229 / Observation number
IHDRCNT =                   69 / Number of headers currently in EDAC RAM
IIMGCNT =                   69 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34031080 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1449 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.61717 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.111 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.12247 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   61 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   61 / CS memory monitor #5
ICSMEM06=                   61 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   61 / CS memory monitor #9
ICSMEM10=                   61 / CS memory monitor #10
ICSMEM11=                   61 / CS memory monitor #11
ICSMEM12=                   61 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   61 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 889 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  445 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36579 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32438238 / Exposure Start Time: MIE coarse
MIFTIMES=            103801744 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32438238 / Exposure Complete: MIE coarse
MIFTIMEC=            103801745 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32438238 / Readout Start: MIE coarse
MIFREADS=            103801745 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32438463 / Readout Complete: MIE coarse
MIFREADC=            103802462 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 890 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  445 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  228 / Observation number
IHDRCNT =                   68 / Number of headers currently in EDAC RAM
IIMGCNT =                   68 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33992992 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1428 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               23.111 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.12733 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.07617 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   47 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   47 / CS memory monitor #5
ICSMEM06=                   47 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   47 / CS memory monitor #9
ICSMEM10=                   47 / CS memory monitor #10
ICSMEM11=                   47 / CS memory monitor #11
ICSMEM12=                   47 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   47 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 891 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  446 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36578 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32438014 / Exposure Start Time: MIE coarse
MIFTIMES=            103801026 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32438014 / Exposure Complete: MIE coarse
MIFTIMEC=            103801027 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32438014 / Readout Start: MIE coarse
MIFREADS=            103801027 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32438238 / Readout Complete: MIE coarse
MIFREADC=            103801744 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 892 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  446 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  227 / Observation number
IHDRCNT =                   67 / Number of headers currently in EDAC RAM
IIMGCNT =                   67 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33954904 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1407 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2478 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.12247 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 893 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  447 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36577 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32438010 / Exposure Start Time: MIE coarse
MIFTIMES=            103801015 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32438011 / Exposure Complete: MIE coarse
MIFTIMEC=            103801015 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32438011 / Readout Start: MIE coarse
MIFREADS=            103801015 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32438014 / Readout Complete: MIE coarse
MIFREADC=            103801026 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 894 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  447 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  226 / Observation number
IHDRCNT =                   66 / Number of headers currently in EDAC RAM
IIMGCNT =                   66 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33916816 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1386 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                40207 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2478 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.12247 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   34 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 895 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  448 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36576 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32437824 / Exposure Start Time: MIE coarse
MIFTIMES=            103800418 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32437824 / Exposure Complete: MIE coarse
MIFTIMEC=            103800418 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32437824 / Readout Start: MIE coarse
MIFREADS=            103800418 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32438010 / Readout Complete: MIE coarse
MIFREADC=            103801015 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 896 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  448 / extension version number
ROOTNAME= 'ibh719i7q                         ' / rootname of the observation set
EXPNAME = 'ibh719i7q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  225 / Observation number
IHDRCNT =                   65 / Number of headers currently in EDAC RAM
IIMGCNT =                   65 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             33878728 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1365 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3291 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2478 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57055 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.10301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   36 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   33 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  104 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29479 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 897 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  449 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36607 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32444650 / Exposure Start Time: MIE coarse
MIFTIMES=            103822262 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32444650 / Exposure Complete: MIE coarse
MIFTIMEC=            103822262 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32444650 / Readout Start: MIE coarse
MIFREADS=            103822262 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32444875 / Readout Complete: MIE coarse
MIFREADC=            103822980 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 898 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  449 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    0 / Observation number
IHDRCNT =                   96 / Number of headers currently in EDAC RAM
IIMGCNT =                   96 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35059456 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2016 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.23923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29023 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   97 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   97 / CS memory monitor #5
ICSMEM06=                   97 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   97 / CS memory monitor #9
ICSMEM10=                   97 / CS memory monitor #10
ICSMEM11=                   97 / CS memory monitor #11
ICSMEM12=                   97 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   97 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 899 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  450 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36606 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32444426 / Exposure Start Time: MIE coarse
MIFTIMES=            103821544 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32444426 / Exposure Complete: MIE coarse
MIFTIMEC=            103821544 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32444426 / Readout Start: MIE coarse
MIFREADS=            103821544 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32444650 / Readout Complete: MIE coarse
MIFREADC=            103822262 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 900 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  450 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  255 / Observation number
IHDRCNT =                   95 / Number of headers currently in EDAC RAM
IIMGCNT =                   95 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35021368 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1995 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29996 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   83 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   83 / CS memory monitor #5
ICSMEM06=                   83 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   83 / CS memory monitor #9
ICSMEM10=                   83 / CS memory monitor #10
ICSMEM11=                   83 / CS memory monitor #11
ICSMEM12=                   83 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   83 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 901 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  451 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36605 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32444201 / Exposure Start Time: MIE coarse
MIFTIMES=            103820826 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32444202 / Exposure Complete: MIE coarse
MIFTIMEC=            103820826 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32444202 / Readout Start: MIE coarse
MIFREADS=            103820826 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32444426 / Readout Complete: MIE coarse
MIFREADC=            103821544 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 902 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  451 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  254 / Observation number
IHDRCNT =                   94 / Number of headers currently in EDAC RAM
IIMGCNT =                   94 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34983280 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1974 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.23923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.30969 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   68 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   68 / CS memory monitor #5
ICSMEM06=                   68 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   68 / CS memory monitor #9
ICSMEM10=                   68 / CS memory monitor #10
ICSMEM11=                   68 / CS memory monitor #11
ICSMEM12=                   68 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   68 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 903 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  452 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36604 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32443977 / Exposure Start Time: MIE coarse
MIFTIMES=            103820107 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32443977 / Exposure Complete: MIE coarse
MIFTIMEC=            103820108 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32443977 / Readout Start: MIE coarse
MIFREADS=            103820108 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32444201 / Readout Complete: MIE coarse
MIFREADC=            103820826 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 904 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  452 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  253 / Observation number
IHDRCNT =                   93 / Number of headers currently in EDAC RAM
IIMGCNT =                   93 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34945192 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1953 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.21977 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.30969 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 905 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  453 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36603 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32443753 / Exposure Start Time: MIE coarse
MIFTIMES=            103819389 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32443753 / Exposure Complete: MIE coarse
MIFTIMEC=            103819390 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32443753 / Readout Start: MIE coarse
MIFREADS=            103819390 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32443977 / Readout Complete: MIE coarse
MIFREADC=            103820107 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 906 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  453 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  252 / Observation number
IHDRCNT =                   92 / Number of headers currently in EDAC RAM
IIMGCNT =                   92 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34907104 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1932 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.21004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.30969 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 907 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  454 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36602 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32443528 / Exposure Start Time: MIE coarse
MIFTIMES=            103818671 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32443528 / Exposure Complete: MIE coarse
MIFTIMEC=            103818672 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32443528 / Readout Start: MIE coarse
MIFREADS=            103818672 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32443752 / Readout Complete: MIE coarse
MIFREADC=            103819389 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 908 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  454 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  251 / Observation number
IHDRCNT =                   91 / Number of headers currently in EDAC RAM
IIMGCNT =                   91 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34869016 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1911 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.35834 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   25 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   25 / CS memory monitor #5
ICSMEM06=                   25 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   25 / CS memory monitor #9
ICSMEM10=                   25 / CS memory monitor #10
ICSMEM11=                   25 / CS memory monitor #11
ICSMEM12=                   25 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   25 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 909 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  455 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36601 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32443304 / Exposure Start Time: MIE coarse
MIFTIMES=            103817953 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32443304 / Exposure Complete: MIE coarse
MIFTIMEC=            103817953 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32443304 / Readout Start: MIE coarse
MIFREADS=            103817953 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32443528 / Readout Complete: MIE coarse
MIFREADC=            103818671 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 910 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  455 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  250 / Observation number
IHDRCNT =                   90 / Number of headers currently in EDAC RAM
IIMGCNT =                   90 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34830928 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1890 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.20031 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.3778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   11 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   11 / CS memory monitor #5
ICSMEM06=                   11 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   11 / CS memory monitor #9
ICSMEM10=                   11 / CS memory monitor #10
ICSMEM11=                   11 / CS memory monitor #11
ICSMEM12=                   11 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29482 / Major frame count
IMINFCNT=                   11 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 911 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  456 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36600 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32443079 / Exposure Start Time: MIE coarse
MIFTIMES=            103817235 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32443079 / Exposure Complete: MIE coarse
MIFTIMEC=            103817235 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32443079 / Readout Start: MIE coarse
MIFREADS=            103817235 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32443304 / Readout Complete: MIE coarse
MIFREADC=            103817953 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 912 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  456 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  249 / Observation number
IHDRCNT =                   89 / Number of headers currently in EDAC RAM
IIMGCNT =                   89 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34792840 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1869 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0329 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.22463 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  117 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  117 / CS memory monitor #5
ICSMEM06=                  117 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  117 / CS memory monitor #9
ICSMEM10=                  117 / CS memory monitor #10
ICSMEM11=                  117 / CS memory monitor #11
ICSMEM12=                  117 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                  117 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 913 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  457 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36599 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32442855 / Exposure Start Time: MIE coarse
MIFTIMES=            103816517 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32442855 / Exposure Complete: MIE coarse
MIFTIMEC=            103816517 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32442855 / Readout Start: MIE coarse
MIFREADS=            103816517 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32443079 / Readout Complete: MIE coarse
MIFREADC=            103817235 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 914 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  457 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  248 / Observation number
IHDRCNT =                   88 / Number of headers currently in EDAC RAM
IIMGCNT =                   88 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34754752 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1848 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.19058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  102 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  102 / CS memory monitor #5
ICSMEM06=                  102 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  102 / CS memory monitor #9
ICSMEM10=                  102 / CS memory monitor #10
ICSMEM11=                  102 / CS memory monitor #11
ICSMEM12=                  102 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                  102 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 915 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  458 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36598 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32442630 / Exposure Start Time: MIE coarse
MIFTIMES=            103815799 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32442631 / Exposure Complete: MIE coarse
MIFTIMEC=            103815799 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32442631 / Readout Start: MIE coarse
MIFREADS=            103815799 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32442855 / Readout Complete: MIE coarse
MIFREADC=            103816517 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 916 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  458 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  247 / Observation number
IHDRCNT =                   87 / Number of headers currently in EDAC RAM
IIMGCNT =                   87 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34716664 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1827 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.19058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.35834 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   88 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   88 / CS memory monitor #5
ICSMEM06=                   88 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   88 / CS memory monitor #9
ICSMEM10=                   88 / CS memory monitor #10
ICSMEM11=                   88 / CS memory monitor #11
ICSMEM12=                   88 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   88 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 917 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  459 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36597 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32442406 / Exposure Start Time: MIE coarse
MIFTIMES=            103815080 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32442406 / Exposure Complete: MIE coarse
MIFTIMEC=            103815081 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32442406 / Readout Start: MIE coarse
MIFREADS=            103815081 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32442630 / Readout Complete: MIE coarse
MIFREADC=            103815799 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 918 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  459 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  246 / Observation number
IHDRCNT =                   86 / Number of headers currently in EDAC RAM
IIMGCNT =                   86 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34678576 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1806 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              2.14286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0329 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.21977 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.39726 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 919 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  460 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36596 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32442182 / Exposure Start Time: MIE coarse
MIFTIMES=            103814362 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32442182 / Exposure Complete: MIE coarse
MIFTIMEC=            103814363 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32442182 / Readout Start: MIE coarse
MIFREADS=            103814363 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32442406 / Readout Complete: MIE coarse
MIFREADC=            103815080 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 920 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  460 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  245 / Observation number
IHDRCNT =                   85 / Number of headers currently in EDAC RAM
IIMGCNT =                   85 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34640488 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1785 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0329 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.17598 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.34861 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   59 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   59 / CS memory monitor #5
ICSMEM06=                   59 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   59 / CS memory monitor #9
ICSMEM10=                   59 / CS memory monitor #10
ICSMEM11=                   59 / CS memory monitor #11
ICSMEM12=                   59 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.07822 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   59 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 921 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  461 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36595 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32441957 / Exposure Start Time: MIE coarse
MIFTIMES=            103813644 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32441957 / Exposure Complete: MIE coarse
MIFTIMEC=            103813645 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32441957 / Readout Start: MIE coarse
MIFREADS=            103813645 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32442182 / Readout Complete: MIE coarse
MIFREADC=            103814362 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 922 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  461 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  244 / Observation number
IHDRCNT =                   84 / Number of headers currently in EDAC RAM
IIMGCNT =                   84 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34602400 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1764 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0329 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.17598 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.38753 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   45 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   45 / CS memory monitor #5
ICSMEM06=                   45 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   45 / CS memory monitor #9
ICSMEM10=                   45 / CS memory monitor #10
ICSMEM11=                   45 / CS memory monitor #11
ICSMEM12=                   45 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   45 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 923 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  462 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36594 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32441733 / Exposure Start Time: MIE coarse
MIFTIMES=            103812926 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32441733 / Exposure Complete: MIE coarse
MIFTIMEC=            103812926 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32441733 / Readout Start: MIE coarse
MIFREADS=            103812926 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32441957 / Readout Complete: MIE coarse
MIFREADC=            103813644 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 924 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  462 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  243 / Observation number
IHDRCNT =                   83 / Number of headers currently in EDAC RAM
IIMGCNT =                   83 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34564312 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1743 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40247 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.17112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.36807 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 925 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  463 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36593 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32441729 / Exposure Start Time: MIE coarse
MIFTIMES=            103812915 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32441729 / Exposure Complete: MIE coarse
MIFTIMEC=            103812915 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32441729 / Readout Start: MIE coarse
MIFREADS=            103812915 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32441733 / Readout Complete: MIE coarse
MIFREADC=            103812926 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 926 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  463 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  242 / Observation number
IHDRCNT =                   82 / Number of headers currently in EDAC RAM
IIMGCNT =                   82 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34526224 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1722 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                40207 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.17112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.36807 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   36 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 927 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  464 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36592 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32441543 / Exposure Start Time: MIE coarse
MIFTIMES=            103812318 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32441543 / Exposure Complete: MIE coarse
MIFTIMEC=            103812318 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32441543 / Readout Start: MIE coarse
MIFREADS=            103812318 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32441729 / Readout Complete: MIE coarse
MIFREADC=            103812915 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 928 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  464 / extension version number
ROOTNAME= 'ibh719i8q                         ' / rootname of the observation set
EXPNAME = 'ibh719i8q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  241 / Observation number
IHDRCNT =                   81 / Number of headers currently in EDAC RAM
IIMGCNT =                   81 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             34488136 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1701 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3292 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.2087 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.20031 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.36807 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   38 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   35 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  110 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29481 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 929 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  465 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36623 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32448369 / Exposure Start Time: MIE coarse
MIFTIMES=            103834162 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32448369 / Exposure Complete: MIE coarse
MIFTIMEC=            103834162 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32448369 / Readout Start: MIE coarse
MIFREADS=            103834162 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32448593 / Readout Complete: MIE coarse
MIFREADC=            103834880 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 930 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  465 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   16 / Observation number
IHDRCNT =                  112 / Number of headers currently in EDAC RAM
IIMGCNT =                  112 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35668864 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2352 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.26104 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   95 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   95 / CS memory monitor #5
ICSMEM06=                   95 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   95 / CS memory monitor #9
ICSMEM10=                   95 / CS memory monitor #10
ICSMEM11=                   95 / CS memory monitor #11
ICSMEM12=                   95 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                   95 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 931 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  466 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36622 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32448144 / Exposure Start Time: MIE coarse
MIFTIMES=            103833443 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32448145 / Exposure Complete: MIE coarse
MIFTIMEC=            103833444 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32448145 / Readout Start: MIE coarse
MIFREADS=            103833444 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32448369 / Readout Complete: MIE coarse
MIFREADC=            103834161 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 932 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  466 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   15 / Observation number
IHDRCNT =                  111 / Number of headers currently in EDAC RAM
IIMGCNT =                  111 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35630776 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2331 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40229 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.2805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   81 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   81 / CS memory monitor #5
ICSMEM06=                   81 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   81 / CS memory monitor #9
ICSMEM10=                   81 / CS memory monitor #10
ICSMEM11=                   81 / CS memory monitor #11
ICSMEM12=                   81 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                   81 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 933 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  467 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36621 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32447920 / Exposure Start Time: MIE coarse
MIFTIMES=            103832725 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32447920 / Exposure Complete: MIE coarse
MIFTIMEC=            103832726 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32447920 / Readout Start: MIE coarse
MIFREADS=            103832726 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32448144 / Readout Complete: MIE coarse
MIFREADC=            103833443 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 934 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  467 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   14 / Observation number
IHDRCNT =                  110 / Number of headers currently in EDAC RAM
IIMGCNT =                  110 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35592688 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2310 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.2805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 935 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  468 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36620 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32447696 / Exposure Start Time: MIE coarse
MIFTIMES=            103832007 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32447696 / Exposure Complete: MIE coarse
MIFTIMEC=            103832008 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32447696 / Readout Start: MIE coarse
MIFREADS=            103832008 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32447920 / Readout Complete: MIE coarse
MIFREADC=            103832725 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 936 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  468 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   13 / Observation number
IHDRCNT =                  109 / Number of headers currently in EDAC RAM
IIMGCNT =                  109 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35554600 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2289 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40237 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.61717 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.26104 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 937 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  469 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36619 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32447471 / Exposure Start Time: MIE coarse
MIFTIMES=            103831289 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32447471 / Exposure Complete: MIE coarse
MIFTIMEC=            103831289 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32447471 / Readout Start: MIE coarse
MIFREADS=            103831289 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32447696 / Readout Complete: MIE coarse
MIFREADC=            103832007 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 938 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  469 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   12 / Observation number
IHDRCNT =                  108 / Number of headers currently in EDAC RAM
IIMGCNT =                  108 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35516512 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2268 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40238 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.24409 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29023 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 939 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  470 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36618 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32447247 / Exposure Start Time: MIE coarse
MIFTIMES=            103830571 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32447247 / Exposure Complete: MIE coarse
MIFTIMEC=            103830571 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32447247 / Readout Start: MIE coarse
MIFREADS=            103830571 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32447471 / Readout Complete: MIE coarse
MIFREADC=            103831289 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 940 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  470 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   11 / Observation number
IHDRCNT =                  107 / Number of headers currently in EDAC RAM
IIMGCNT =                  107 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35478424 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2247 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29023 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   23 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   23 / CS memory monitor #5
ICSMEM06=                   23 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   23 / CS memory monitor #9
ICSMEM10=                   23 / CS memory monitor #10
ICSMEM11=                   23 / CS memory monitor #11
ICSMEM12=                   23 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                   23 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 941 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  471 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36617 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32447022 / Exposure Start Time: MIE coarse
MIFTIMES=            103829853 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32447022 / Exposure Complete: MIE coarse
MIFTIMEC=            103829853 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32447022 / Readout Start: MIE coarse
MIFREADS=            103829853 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32447247 / Readout Complete: MIE coarse
MIFREADC=            103830571 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 942 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  471 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   10 / Observation number
IHDRCNT =                  106 / Number of headers currently in EDAC RAM
IIMGCNT =                  106 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35440336 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2226 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29996 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    9 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    9 / CS memory monitor #5
ICSMEM06=                    9 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    9 / CS memory monitor #9
ICSMEM10=                    9 / CS memory monitor #10
ICSMEM11=                    9 / CS memory monitor #11
ICSMEM12=                    9 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29484 / Major frame count
IMINFCNT=                    9 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 943 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  472 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36616 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32446798 / Exposure Start Time: MIE coarse
MIFTIMES=            103829135 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32446798 / Exposure Complete: MIE coarse
MIFTIMEC=            103829135 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32446798 / Readout Start: MIE coarse
MIFREADS=            103829135 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32447022 / Readout Complete: MIE coarse
MIFREADC=            103829853 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 944 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  472 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    9 / Observation number
IHDRCNT =                  105 / Number of headers currently in EDAC RAM
IIMGCNT =                  105 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35402248 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2205 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40236 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.29996 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  115 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  115 / CS memory monitor #5
ICSMEM06=                  115 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  115 / CS memory monitor #9
ICSMEM10=                  115 / CS memory monitor #10
ICSMEM11=                  115 / CS memory monitor #11
ICSMEM12=                  115 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                  115 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 945 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  473 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36615 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32446574 / Exposure Start Time: MIE coarse
MIFTIMES=            103828416 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32446574 / Exposure Complete: MIE coarse
MIFTIMEC=            103828417 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32446574 / Readout Start: MIE coarse
MIFREADS=            103828417 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32446798 / Readout Complete: MIE coarse
MIFREADC=            103829135 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 946 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  473 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    8 / Observation number
IHDRCNT =                  104 / Number of headers currently in EDAC RAM
IIMGCNT =                  104 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35364160 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2184 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40238 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.30969 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  100 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  100 / CS memory monitor #5
ICSMEM06=                  100 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  100 / CS memory monitor #9
ICSMEM10=                  100 / CS memory monitor #10
ICSMEM11=                  100 / CS memory monitor #11
ICSMEM12=                  100 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                  100 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 947 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  474 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36614 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32446349 / Exposure Start Time: MIE coarse
MIFTIMES=            103827698 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32446349 / Exposure Complete: MIE coarse
MIFTIMEC=            103827699 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32446349 / Readout Start: MIE coarse
MIFREADS=            103827699 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32446573 / Readout Complete: MIE coarse
MIFREADC=            103828416 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 948 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  474 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    7 / Observation number
IHDRCNT =                  103 / Number of headers currently in EDAC RAM
IIMGCNT =                  103 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35326072 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2163 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40235 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.23923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.30969 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   86 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   86 / CS memory monitor #5
ICSMEM06=                   86 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   86 / CS memory monitor #9
ICSMEM10=                   86 / CS memory monitor #10
ICSMEM11=                   86 / CS memory monitor #11
ICSMEM12=                   86 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   86 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 949 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  475 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36613 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32446125 / Exposure Start Time: MIE coarse
MIFTIMES=            103826980 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32446125 / Exposure Complete: MIE coarse
MIFTIMEC=            103826981 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32446125 / Readout Start: MIE coarse
MIFREADS=            103826981 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32446349 / Readout Complete: MIE coarse
MIFREADC=            103827698 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 950 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  475 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    6 / Observation number
IHDRCNT =                  102 / Number of headers currently in EDAC RAM
IIMGCNT =                  102 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35287984 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2142 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =               6.0859 / IR FPA six-stage TEC voltage
IRCETECV=              6.24409 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.30969 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 951 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  476 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36612 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32445900 / Exposure Start Time: MIE coarse
MIFTIMES=            103826262 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32445900 / Exposure Complete: MIE coarse
MIFTIMEC=            103826262 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32445900 / Readout Start: MIE coarse
MIFREADS=            103826262 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32446125 / Readout Complete: MIE coarse
MIFREADC=            103826980 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 952 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  476 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    5 / Observation number
IHDRCNT =                  101 / Number of headers currently in EDAC RAM
IIMGCNT =                  101 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35249896 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2121 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6692 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.31942 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   57 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   57 / CS memory monitor #5
ICSMEM06=                   57 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   57 / CS memory monitor #9
ICSMEM10=                   57 / CS memory monitor #10
ICSMEM11=                   57 / CS memory monitor #11
ICSMEM12=                   57 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   57 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 953 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  477 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36611 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32445676 / Exposure Start Time: MIE coarse
MIFTIMES=            103825544 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32445676 / Exposure Complete: MIE coarse
MIFTIMEC=            103825544 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32445676 / Readout Start: MIE coarse
MIFREADS=            103825544 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32445900 / Readout Complete: MIE coarse
MIFREADC=            103826262 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 954 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  477 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    4 / Observation number
IHDRCNT =                  100 / Number of headers currently in EDAC RAM
IIMGCNT =                  100 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35211808 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2100 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40240 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2295 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.31942 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   43 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   43 / CS memory monitor #5
ICSMEM06=                   43 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   43 / CS memory monitor #9
ICSMEM10=                   43 / CS memory monitor #10
ICSMEM11=                   43 / CS memory monitor #11
ICSMEM12=                   43 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   43 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 955 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  478 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36610 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32445451 / Exposure Start Time: MIE coarse
MIFTIMES=            103824826 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32445452 / Exposure Complete: MIE coarse
MIFTIMEC=            103824826 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32445452 / Readout Start: MIE coarse
MIFREADS=            103824826 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32445676 / Readout Complete: MIE coarse
MIFREADC=            103825544 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 956 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  478 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    3 / Observation number
IHDRCNT =                   99 / Number of headers currently in EDAC RAM
IIMGCNT =                   99 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35173720 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2079 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.32915 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 957 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  479 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36609 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32445448 / Exposure Start Time: MIE coarse
MIFTIMES=            103824814 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32445448 / Exposure Complete: MIE coarse
MIFTIMEC=            103824815 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32445448 / Readout Start: MIE coarse
MIFREADS=            103824815 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32445451 / Readout Complete: MIE coarse
MIFREADC=            103824826 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 958 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  479 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    2 / Observation number
IHDRCNT =                   98 / Number of headers currently in EDAC RAM
IIMGCNT =                   98 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35135632 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2058 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                40199 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.32915 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =               35.938 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   38 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 959 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  480 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36608 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32445261 / Exposure Start Time: MIE coarse
MIFTIMES=            103824218 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32445262 / Exposure Complete: MIE coarse
MIFTIMEC=            103824218 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32445262 / Readout Start: MIE coarse
MIFREADS=            103824218 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32445448 / Readout Complete: MIE coarse
MIFREADC=            103824814 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 960 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  480 / extension version number
ROOTNAME= 'ibh719i9q                         ' / rootname of the observation set
EXPNAME = 'ibh719i9q'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                    1 / Observation number
IHDRCNT =                   97 / Number of headers currently in EDAC RAM
IIMGCNT =                   97 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35097544 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2037 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3293 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.85714 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3212 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.1501 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.21004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.32915 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.07822 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   40 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   37 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  116 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29483 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 961 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  481 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36639 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32452088 / Exposure Start Time: MIE coarse
MIFTIMES=            103846062 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32452088 / Exposure Complete: MIE coarse
MIFTIMEC=            103846062 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32452088 / Readout Start: MIE coarse
MIFREADS=            103846062 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32452312 / Readout Complete: MIE coarse
MIFREADC=            103846780 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 962 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  481 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   32 / Observation number
IHDRCNT =                  128 / Number of headers currently in EDAC RAM
IIMGCNT =                  128 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36278272 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2688 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.22212 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   93 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   93 / CS memory monitor #5
ICSMEM06=                   93 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   93 / CS memory monitor #9
ICSMEM10=                   93 / CS memory monitor #10
ICSMEM11=                   93 / CS memory monitor #11
ICSMEM12=                   93 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                   93 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 963 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  482 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36638 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32451863 / Exposure Start Time: MIE coarse
MIFTIMES=            103845344 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32451863 / Exposure Complete: MIE coarse
MIFTIMEC=            103845344 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32451863 / Readout Start: MIE coarse
MIFREADS=            103845344 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32452088 / Readout Complete: MIE coarse
MIFREADC=            103846062 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 964 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  482 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   31 / Observation number
IHDRCNT =                  127 / Number of headers currently in EDAC RAM
IIMGCNT =                  127 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36240184 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2667 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.28788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   79 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   79 / CS memory monitor #5
ICSMEM06=                   79 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   79 / CS memory monitor #9
ICSMEM10=                   79 / CS memory monitor #10
ICSMEM11=                   79 / CS memory monitor #11
ICSMEM12=                   79 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                   79 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 965 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  483 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36637 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32451639 / Exposure Start Time: MIE coarse
MIFTIMES=            103844626 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32451639 / Exposure Complete: MIE coarse
MIFTIMEC=            103844626 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32451639 / Readout Start: MIE coarse
MIFREADS=            103844626 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32451863 / Readout Complete: MIE coarse
MIFREADC=            103845344 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 966 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  483 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   30 / Observation number
IHDRCNT =                  126 / Number of headers currently in EDAC RAM
IIMGCNT =                  126 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36202096 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2646 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 967 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  484 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36636 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32451414 / Exposure Start Time: MIE coarse
MIFTIMES=            103843907 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32451415 / Exposure Complete: MIE coarse
MIFTIMEC=            103843908 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32451415 / Readout Start: MIE coarse
MIFREADS=            103843908 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32451639 / Readout Complete: MIE coarse
MIFREADC=            103844626 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 968 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  484 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   29 / Observation number
IHDRCNT =                  125 / Number of headers currently in EDAC RAM
IIMGCNT =                  125 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36164008 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2625 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.28788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 969 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  485 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36635 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32451190 / Exposure Start Time: MIE coarse
MIFTIMES=            103843189 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32451190 / Exposure Complete: MIE coarse
MIFTIMEC=            103843190 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32451190 / Readout Start: MIE coarse
MIFREADS=            103843190 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32451414 / Readout Complete: MIE coarse
MIFREADC=            103843907 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 970 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  485 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   28 / Observation number
IHDRCNT =                  124 / Number of headers currently in EDAC RAM
IIMGCNT =                  124 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36125920 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2604 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40238 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.28788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.24158 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 971 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  486 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36634 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32450966 / Exposure Start Time: MIE coarse
MIFTIMES=            103842471 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32450966 / Exposure Complete: MIE coarse
MIFTIMEC=            103842472 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32450966 / Readout Start: MIE coarse
MIFREADS=            103842472 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32451190 / Readout Complete: MIE coarse
MIFREADC=            103843189 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 972 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  486 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   27 / Observation number
IHDRCNT =                  123 / Number of headers currently in EDAC RAM
IIMGCNT =                  123 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36087832 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2583 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.22212 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   21 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   21 / CS memory monitor #5
ICSMEM06=                   21 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   21 / CS memory monitor #9
ICSMEM10=                   21 / CS memory monitor #10
ICSMEM11=                   21 / CS memory monitor #11
ICSMEM12=                   21 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                   21 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 973 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  487 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36633 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32450741 / Exposure Start Time: MIE coarse
MIFTIMES=            103841753 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32450741 / Exposure Complete: MIE coarse
MIFTIMEC=            103841753 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32450741 / Readout Start: MIE coarse
MIFREADS=            103841753 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32450966 / Readout Complete: MIE coarse
MIFREADC=            103842471 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 974 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  487 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   26 / Observation number
IHDRCNT =                  122 / Number of headers currently in EDAC RAM
IIMGCNT =                  122 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36049744 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2562 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.30247 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    7 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    7 / CS memory monitor #5
ICSMEM06=                    7 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    7 / CS memory monitor #9
ICSMEM10=                    7 / CS memory monitor #10
ICSMEM11=                    7 / CS memory monitor #11
ICSMEM12=                    7 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29486 / Major frame count
IMINFCNT=                    7 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 975 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  488 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36632 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32450517 / Exposure Start Time: MIE coarse
MIFTIMES=            103841035 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32450517 / Exposure Complete: MIE coarse
MIFTIMEC=            103841035 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32450517 / Readout Start: MIE coarse
MIFREADS=            103841035 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32450741 / Readout Complete: MIE coarse
MIFREADC=            103841753 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 976 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  488 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   25 / Observation number
IHDRCNT =                  121 / Number of headers currently in EDAC RAM
IIMGCNT =                  121 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36011656 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2541 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.28788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.22212 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  113 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  113 / CS memory monitor #5
ICSMEM06=                  113 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  113 / CS memory monitor #9
ICSMEM10=                  113 / CS memory monitor #10
ICSMEM11=                  113 / CS memory monitor #11
ICSMEM12=                  113 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                  113 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 977 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  489 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36631 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32450292 / Exposure Start Time: MIE coarse
MIFTIMES=            103840317 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32450293 / Exposure Complete: MIE coarse
MIFTIMEC=            103840317 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32450293 / Readout Start: MIE coarse
MIFREADS=            103840317 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32450517 / Readout Complete: MIE coarse
MIFREADC=            103841035 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 978 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  489 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   24 / Observation number
IHDRCNT =                  120 / Number of headers currently in EDAC RAM
IIMGCNT =                  120 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35973568 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2520 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.30247 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.24158 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   98 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   98 / CS memory monitor #5
ICSMEM06=                   98 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   98 / CS memory monitor #9
ICSMEM10=                   98 / CS memory monitor #10
ICSMEM11=                   98 / CS memory monitor #11
ICSMEM12=                   98 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   98 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 979 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  490 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36630 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32450068 / Exposure Start Time: MIE coarse
MIFTIMES=            103839599 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32450068 / Exposure Complete: MIE coarse
MIFTIMEC=            103839599 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32450068 / Readout Start: MIE coarse
MIFREADS=            103839599 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32450292 / Readout Complete: MIE coarse
MIFREADC=            103840317 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 980 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  490 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   23 / Observation number
IHDRCNT =                  119 / Number of headers currently in EDAC RAM
IIMGCNT =                  119 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35935480 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2499 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                 3.75 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.28788 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.26104 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 981 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  491 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36629 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32449844 / Exposure Start Time: MIE coarse
MIFTIMES=            103838880 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32449844 / Exposure Complete: MIE coarse
MIFTIMEC=            103838881 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32449844 / Readout Start: MIE coarse
MIFREADS=            103838881 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32450068 / Readout Complete: MIE coarse
MIFREADC=            103839598 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 982 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  491 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   22 / Observation number
IHDRCNT =                  118 / Number of headers currently in EDAC RAM
IIMGCNT =                  118 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35897392 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2478 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.24158 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 983 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  492 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36628 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32449619 / Exposure Start Time: MIE coarse
MIFTIMES=            103838162 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32449619 / Exposure Complete: MIE coarse
MIFTIMEC=            103838163 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32449619 / Readout Start: MIE coarse
MIFREADS=            103838163 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32449844 / Readout Complete: MIE coarse
MIFREADC=            103838880 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 984 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  492 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   21 / Observation number
IHDRCNT =                  117 / Number of headers currently in EDAC RAM
IIMGCNT =                  117 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35859304 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2457 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.3122 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.25131 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   55 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   55 / CS memory monitor #5
ICSMEM06=                   55 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   55 / CS memory monitor #9
ICSMEM10=                   55 / CS memory monitor #10
ICSMEM11=                   55 / CS memory monitor #11
ICSMEM12=                   55 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   55 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 985 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  493 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36627 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32449395 / Exposure Start Time: MIE coarse
MIFTIMES=            103837444 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32449395 / Exposure Complete: MIE coarse
MIFTIMEC=            103837445 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32449395 / Readout Start: MIE coarse
MIFREADS=            103837445 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32449619 / Readout Complete: MIE coarse
MIFREADC=            103838162 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 986 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  493 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   20 / Observation number
IHDRCNT =                  116 / Number of headers currently in EDAC RAM
IIMGCNT =                  116 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35821216 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2436 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   41 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   41 / CS memory monitor #5
ICSMEM06=                   41 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   41 / CS memory monitor #9
ICSMEM10=                   41 / CS memory monitor #10
ICSMEM11=                   41 / CS memory monitor #11
ICSMEM12=                   41 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   41 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 987 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  494 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36626 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32449170 / Exposure Start Time: MIE coarse
MIFTIMES=            103836726 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32449170 / Exposure Complete: MIE coarse
MIFTIMEC=            103836726 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32449170 / Readout Start: MIE coarse
MIFREADS=            103836726 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32449395 / Readout Complete: MIE coarse
MIFREADC=            103837444 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 988 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  494 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   19 / Observation number
IHDRCNT =                  115 / Number of headers currently in EDAC RAM
IIMGCNT =                  115 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35783128 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2415 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.27077 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 989 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  495 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36625 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32449167 / Exposure Start Time: MIE coarse
MIFTIMES=            103836715 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32449167 / Exposure Complete: MIE coarse
MIFTIMEC=            103836715 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32449167 / Readout Start: MIE coarse
MIFREADS=            103836715 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32449170 / Readout Complete: MIE coarse
MIFREADC=            103836726 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 990 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  495 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   18 / Observation number
IHDRCNT =                  114 / Number of headers currently in EDAC RAM
IIMGCNT =                  114 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35745040 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2394 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                40202 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.27077 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   40 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 991 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  496 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36624 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32448980 / Exposure Start Time: MIE coarse
MIFTIMES=            103836118 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32448980 / Exposure Complete: MIE coarse
MIFTIMEC=            103836118 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32448980 / Readout Start: MIE coarse
MIFREADS=            103836118 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32449167 / Readout Complete: MIE coarse
MIFREADC=            103836715 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 992 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  496 / extension version number
ROOTNAME= 'ibh719iaq                         ' / rootname of the observation set
EXPNAME = 'ibh719iaq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   17 / Observation number
IHDRCNT =                  113 / Number of headers currently in EDAC RAM
IIMGCNT =                  113 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             35706952 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2373 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3294 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0915 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.23185 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   42 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   39 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  122 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29485 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 993 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  497 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36655 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32455806 / Exposure Start Time: MIE coarse
MIFTIMES=            103857961 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32455807 / Exposure Complete: MIE coarse
MIFTIMEC=            103857962 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32455807 / Readout Start: MIE coarse
MIFREADS=            103857962 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32456031 / Readout Complete: MIE coarse
MIFREADC=            103858680 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 994 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  497 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   48 / Observation number
IHDRCNT =                  144 / Number of headers currently in EDAC RAM
IIMGCNT =                  144 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36887680 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3024 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40287 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.30247 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   91 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   91 / CS memory monitor #5
ICSMEM06=                   91 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   91 / CS memory monitor #9
ICSMEM10=                   91 / CS memory monitor #10
ICSMEM11=                   91 / CS memory monitor #11
ICSMEM12=                   91 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                   91 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 995 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  498 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36654 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32455582 / Exposure Start Time: MIE coarse
MIFTIMES=            103857243 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32455582 / Exposure Complete: MIE coarse
MIFTIMEC=            103857244 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32455582 / Readout Start: MIE coarse
MIFREADS=            103857244 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32455806 / Readout Complete: MIE coarse
MIFREADC=            103857961 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 996 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  498 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   47 / Observation number
IHDRCNT =                  143 / Number of headers currently in EDAC RAM
IIMGCNT =                  143 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36849592 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3003 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40279 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.15401 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   77 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   77 / CS memory monitor #5
ICSMEM06=                   77 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   77 / CS memory monitor #9
ICSMEM10=                   77 / CS memory monitor #10
ICSMEM11=                   77 / CS memory monitor #11
ICSMEM12=                   77 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                   77 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 997 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  499 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36653 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32455358 / Exposure Start Time: MIE coarse
MIFTIMES=            103856525 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32455358 / Exposure Complete: MIE coarse
MIFTIMEC=            103856526 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32455358 / Readout Start: MIE coarse
MIFREADS=            103856526 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32455582 / Readout Complete: MIE coarse
MIFREADC=            103857243 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 998 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  499 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   46 / Observation number
IHDRCNT =                  142 / Number of headers currently in EDAC RAM
IIMGCNT =                  142 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36811504 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2982 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40289 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.27328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.16374 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 999 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  500 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36652 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32455133 / Exposure Start Time: MIE coarse
MIFTIMES=            103855807 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32455133 / Exposure Complete: MIE coarse
MIFTIMEC=            103855807 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32455133 / Readout Start: MIE coarse
MIFREADS=            103855807 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32455358 / Readout Complete: MIE coarse
MIFREADC=            103856525 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1000 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  500 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   45 / Observation number
IHDRCNT =                  141 / Number of headers currently in EDAC RAM
IIMGCNT =                  141 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36773416 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2961 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40290 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.1832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1001 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  501 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36651 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32454909 / Exposure Start Time: MIE coarse
MIFTIMES=            103855089 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32454909 / Exposure Complete: MIE coarse
MIFTIMEC=            103855089 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32454909 / Readout Start: MIE coarse
MIFREADS=            103855089 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32455133 / Readout Complete: MIE coarse
MIFREADC=            103855807 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1002 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  501 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   44 / Observation number
IHDRCNT =                  140 / Number of headers currently in EDAC RAM
IIMGCNT =                  140 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36735328 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2940 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40286 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.27328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.15401 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1003 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  502 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36650 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32454684 / Exposure Start Time: MIE coarse
MIFTIMES=            103854371 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32454684 / Exposure Complete: MIE coarse
MIFTIMEC=            103854371 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32454684 / Readout Start: MIE coarse
MIFREADS=            103854371 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32454909 / Readout Complete: MIE coarse
MIFREADC=            103855089 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1004 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  502 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   43 / Observation number
IHDRCNT =                  139 / Number of headers currently in EDAC RAM
IIMGCNT =                  139 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36697240 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2919 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40285 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   19 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   19 / CS memory monitor #5
ICSMEM06=                   19 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   19 / CS memory monitor #9
ICSMEM10=                   19 / CS memory monitor #10
ICSMEM11=                   19 / CS memory monitor #11
ICSMEM12=                   19 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                   19 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1005 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  503 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36649 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32454460 / Exposure Start Time: MIE coarse
MIFTIMES=            103853653 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32454460 / Exposure Complete: MIE coarse
MIFTIMEC=            103853653 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32454460 / Readout Start: MIE coarse
MIFREADS=            103853653 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32454684 / Readout Complete: MIE coarse
MIFREADC=            103854371 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1006 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  503 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   42 / Observation number
IHDRCNT =                  138 / Number of headers currently in EDAC RAM
IIMGCNT =                  138 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36659152 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2898 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40292 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.14428 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    5 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    5 / CS memory monitor #5
ICSMEM06=                    5 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    5 / CS memory monitor #9
ICSMEM10=                    5 / CS memory monitor #10
ICSMEM11=                    5 / CS memory monitor #11
ICSMEM12=                    5 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29488 / Major frame count
IMINFCNT=                    5 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1007 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  504 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36648 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32454235 / Exposure Start Time: MIE coarse
MIFTIMES=            103852934 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32454236 / Exposure Complete: MIE coarse
MIFTIMEC=            103852935 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32454236 / Readout Start: MIE coarse
MIFREADS=            103852935 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32454460 / Readout Complete: MIE coarse
MIFREADC=            103853653 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1008 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  504 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   41 / Observation number
IHDRCNT =                  137 / Number of headers currently in EDAC RAM
IIMGCNT =                  137 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36621064 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2877 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40289 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.29761 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.16374 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  111 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  111 / CS memory monitor #5
ICSMEM06=                  111 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  111 / CS memory monitor #9
ICSMEM10=                  111 / CS memory monitor #10
ICSMEM11=                  111 / CS memory monitor #11
ICSMEM12=                  111 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                  111 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1009 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  505 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36647 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32454011 / Exposure Start Time: MIE coarse
MIFTIMES=            103852216 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32454011 / Exposure Complete: MIE coarse
MIFTIMEC=            103852217 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32454011 / Readout Start: MIE coarse
MIFREADS=            103852217 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32454235 / Readout Complete: MIE coarse
MIFREADC=            103852934 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1010 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  505 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   40 / Observation number
IHDRCNT =                  136 / Number of headers currently in EDAC RAM
IIMGCNT =                  136 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36582976 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2856 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40289 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   96 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   96 / CS memory monitor #5
ICSMEM06=                   96 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   96 / CS memory monitor #9
ICSMEM10=                   96 / CS memory monitor #10
ICSMEM11=                   96 / CS memory monitor #11
ICSMEM12=                   96 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   96 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1011 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  506 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36646 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32453787 / Exposure Start Time: MIE coarse
MIFTIMES=            103851498 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32453787 / Exposure Complete: MIE coarse
MIFTIMEC=            103851499 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32453787 / Readout Start: MIE coarse
MIFREADS=            103851499 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32454011 / Readout Complete: MIE coarse
MIFREADC=            103852216 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1012 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  506 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   39 / Observation number
IHDRCNT =                  135 / Number of headers currently in EDAC RAM
IIMGCNT =                  135 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36544888 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2835 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40288 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 8.75 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.30734 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.15401 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   82 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   82 / CS memory monitor #5
ICSMEM06=                   82 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   82 / CS memory monitor #9
ICSMEM10=                   82 / CS memory monitor #10
ICSMEM11=                   82 / CS memory monitor #11
ICSMEM12=                   82 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   82 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1013 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  507 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36645 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32453562 / Exposure Start Time: MIE coarse
MIFTIMES=            103850780 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32453562 / Exposure Complete: MIE coarse
MIFTIMEC=            103850781 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32453562 / Readout Start: MIE coarse
MIFREADS=            103850781 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32453787 / Readout Complete: MIE coarse
MIFREADC=            103851498 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1014 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  507 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   38 / Observation number
IHDRCNT =                  134 / Number of headers currently in EDAC RAM
IIMGCNT =                  134 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36506800 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2814 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40287 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              4.28571 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   68 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   68 / CS memory monitor #5
ICSMEM06=                   68 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   68 / CS memory monitor #9
ICSMEM10=                   68 / CS memory monitor #10
ICSMEM11=                   68 / CS memory monitor #11
ICSMEM12=                   68 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   68 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1015 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  508 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36644 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32453338 / Exposure Start Time: MIE coarse
MIFTIMES=            103850062 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32453338 / Exposure Complete: MIE coarse
MIFTIMEC=            103850062 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32453338 / Readout Start: MIE coarse
MIFREADS=            103850062 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32453562 / Readout Complete: MIE coarse
MIFREADC=            103850780 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1016 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  508 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   37 / Observation number
IHDRCNT =                  133 / Number of headers currently in EDAC RAM
IIMGCNT =                  133 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36468712 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2793 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40280 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   53 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   53 / CS memory monitor #5
ICSMEM06=                   53 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   53 / CS memory monitor #9
ICSMEM10=                   53 / CS memory monitor #10
ICSMEM11=                   53 / CS memory monitor #11
ICSMEM12=                   53 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   53 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1017 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  509 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36643 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32453113 / Exposure Start Time: MIE coarse
MIFTIMES=            103849344 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32453113 / Exposure Complete: MIE coarse
MIFTIMEC=            103849344 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32453113 / Readout Start: MIE coarse
MIFREADS=            103849344 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32453338 / Readout Complete: MIE coarse
MIFREADC=            103850062 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1018 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  509 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   36 / Observation number
IHDRCNT =                  132 / Number of headers currently in EDAC RAM
IIMGCNT =                  132 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36430624 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2772 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40287 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8766 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.16374 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   39 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   39 / CS memory monitor #5
ICSMEM06=                   39 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   39 / CS memory monitor #9
ICSMEM10=                   39 / CS memory monitor #10
ICSMEM11=                   39 / CS memory monitor #11
ICSMEM12=                   39 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   39 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1019 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  510 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36642 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32452889 / Exposure Start Time: MIE coarse
MIFTIMES=            103848626 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32452889 / Exposure Complete: MIE coarse
MIFTIMEC=            103848626 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32452889 / Readout Start: MIE coarse
MIFREADS=            103848626 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32453113 / Readout Complete: MIE coarse
MIFREADC=            103849344 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1020 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  510 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   35 / Observation number
IHDRCNT =                  131 / Number of headers currently in EDAC RAM
IIMGCNT =                  131 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36392536 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2751 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40284 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.21239 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1021 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  511 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36641 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32452885 / Exposure Start Time: MIE coarse
MIFTIMES=            103848614 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32452886 / Exposure Complete: MIE coarse
MIFTIMEC=            103848615 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32452886 / Readout Start: MIE coarse
MIFREADS=            103848615 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32452889 / Readout Complete: MIE coarse
MIFREADC=            103848626 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1022 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  511 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   34 / Observation number
IHDRCNT =                  130 / Number of headers currently in EDAC RAM
IIMGCNT =                  130 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36354448 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2730 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                40246 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.21239 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   42 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1023 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  512 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36640 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32452699 / Exposure Start Time: MIE coarse
MIFTIMES=            103848018 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32452699 / Exposure Complete: MIE coarse
MIFTIMEC=            103848018 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32452699 / Readout Start: MIE coarse
MIFREADS=            103848018 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32452885 / Readout Complete: MIE coarse
MIFREADC=            103848614 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1024 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  512 / extension version number
ROOTNAME= 'ibh719ibq                         ' / rootname of the observation set
EXPNAME = 'ibh719ibq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   33 / Observation number
IHDRCNT =                  129 / Number of headers currently in EDAC RAM
IIMGCNT =                  129 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36316360 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2709 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3295 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.53905 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -33.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=              34.3755 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=               35.938 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   44 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   41 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  128 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29487 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1025 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  513 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36671 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32459525 / Exposure Start Time: MIE coarse
MIFTIMES=            103869862 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32459525 / Exposure Complete: MIE coarse
MIFTIMEC=            103869862 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32459525 / Readout Start: MIE coarse
MIFREADS=            103869862 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32459750 / Readout Complete: MIE coarse
MIFREADC=            103870580 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1026 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  513 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   64 / Observation number
IHDRCNT =                  160 / Number of headers currently in EDAC RAM
IIMGCNT =                  160 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37497088 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3360 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   89 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   89 / CS memory monitor #5
ICSMEM06=                   89 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   89 / CS memory monitor #9
ICSMEM10=                   89 / CS memory monitor #10
ICSMEM11=                   89 / CS memory monitor #11
ICSMEM12=                   89 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                   89 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1027 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  514 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36670 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32459301 / Exposure Start Time: MIE coarse
MIFTIMES=            103869144 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32459301 / Exposure Complete: MIE coarse
MIFTIMEC=            103869144 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32459301 / Readout Start: MIE coarse
MIFREADS=            103869144 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32459525 / Readout Complete: MIE coarse
MIFREADC=            103869862 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1028 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  514 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   63 / Observation number
IHDRCNT =                  159 / Number of headers currently in EDAC RAM
IIMGCNT =                  159 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37459000 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3339 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   75 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   75 / CS memory monitor #5
ICSMEM06=                   75 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   75 / CS memory monitor #9
ICSMEM10=                   75 / CS memory monitor #10
ICSMEM11=                   75 / CS memory monitor #11
ICSMEM12=                   75 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                   75 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1029 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  515 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36669 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32459076 / Exposure Start Time: MIE coarse
MIFTIMES=            103868426 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32459077 / Exposure Complete: MIE coarse
MIFTIMEC=            103868426 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32459077 / Readout Start: MIE coarse
MIFREADS=            103868426 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32459301 / Readout Complete: MIE coarse
MIFREADC=            103869144 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1030 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  515 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   62 / Observation number
IHDRCNT =                  158 / Number of headers currently in EDAC RAM
IIMGCNT =                  158 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37420912 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3318 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1031 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  516 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36668 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32458852 / Exposure Start Time: MIE coarse
MIFTIMES=            103867707 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32458852 / Exposure Complete: MIE coarse
MIFTIMEC=            103867708 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32458852 / Readout Start: MIE coarse
MIFREADS=            103867708 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32459076 / Readout Complete: MIE coarse
MIFREADC=            103868426 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1032 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  516 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   61 / Observation number
IHDRCNT =                  157 / Number of headers currently in EDAC RAM
IIMGCNT =                  157 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37382824 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3297 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1033 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  517 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36667 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32458628 / Exposure Start Time: MIE coarse
MIFTIMES=            103866989 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32458628 / Exposure Complete: MIE coarse
MIFTIMEC=            103866990 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32458628 / Readout Start: MIE coarse
MIFREADS=            103866990 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32458852 / Readout Complete: MIE coarse
MIFREADC=            103867707 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1034 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  517 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   60 / Observation number
IHDRCNT =                  156 / Number of headers currently in EDAC RAM
IIMGCNT =                  156 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37344736 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3276 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1035 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  518 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36666 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32458403 / Exposure Start Time: MIE coarse
MIFTIMES=            103866271 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32458403 / Exposure Complete: MIE coarse
MIFTIMEC=            103866272 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32458403 / Readout Start: MIE coarse
MIFREADS=            103866272 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32458628 / Readout Complete: MIE coarse
MIFREADC=            103866989 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1036 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  518 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   59 / Observation number
IHDRCNT =                  155 / Number of headers currently in EDAC RAM
IIMGCNT =                  155 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37306648 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3255 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   17 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   17 / CS memory monitor #5
ICSMEM06=                   17 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   17 / CS memory monitor #9
ICSMEM10=                   17 / CS memory monitor #10
ICSMEM11=                   17 / CS memory monitor #11
ICSMEM12=                   17 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                   17 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1037 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  519 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36665 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32458179 / Exposure Start Time: MIE coarse
MIFTIMES=            103865553 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32458179 / Exposure Complete: MIE coarse
MIFTIMEC=            103865553 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32458179 / Readout Start: MIE coarse
MIFREADS=            103865553 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32458403 / Readout Complete: MIE coarse
MIFREADC=            103866271 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1038 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  519 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   58 / Observation number
IHDRCNT =                  154 / Number of headers currently in EDAC RAM
IIMGCNT =                  154 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37268560 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3234 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    3 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    3 / CS memory monitor #5
ICSMEM06=                    3 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    3 / CS memory monitor #9
ICSMEM10=                    3 / CS memory monitor #10
ICSMEM11=                    3 / CS memory monitor #11
ICSMEM12=                    3 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29490 / Major frame count
IMINFCNT=                    3 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1039 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  520 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36664 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32457954 / Exposure Start Time: MIE coarse
MIFTIMES=            103864835 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32457954 / Exposure Complete: MIE coarse
MIFTIMEC=            103864835 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32457954 / Readout Start: MIE coarse
MIFREADS=            103864835 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32458179 / Readout Complete: MIE coarse
MIFREADC=            103865553 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1040 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  520 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   57 / Observation number
IHDRCNT =                  153 / Number of headers currently in EDAC RAM
IIMGCNT =                  153 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37230472 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3213 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.28301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.14428 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  109 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  109 / CS memory monitor #5
ICSMEM06=                  109 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  109 / CS memory monitor #9
ICSMEM10=                  109 / CS memory monitor #10
ICSMEM11=                  109 / CS memory monitor #11
ICSMEM12=                  109 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                  109 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1041 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  521 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36663 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32457730 / Exposure Start Time: MIE coarse
MIFTIMES=            103864117 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32457730 / Exposure Complete: MIE coarse
MIFTIMEC=            103864117 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32457730 / Readout Start: MIE coarse
MIFREADS=            103864117 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32457954 / Readout Complete: MIE coarse
MIFREADC=            103864835 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1042 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  521 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   56 / Observation number
IHDRCNT =                  152 / Number of headers currently in EDAC RAM
IIMGCNT =                  152 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37192384 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3192 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   94 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   94 / CS memory monitor #5
ICSMEM06=                   94 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   94 / CS memory monitor #9
ICSMEM10=                   94 / CS memory monitor #10
ICSMEM11=                   94 / CS memory monitor #11
ICSMEM12=                   94 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   94 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1043 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  522 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36662 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32457505 / Exposure Start Time: MIE coarse
MIFTIMES=            103863399 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32457506 / Exposure Complete: MIE coarse
MIFTIMEC=            103863399 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32457506 / Readout Start: MIE coarse
MIFREADS=            103863399 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32457730 / Readout Complete: MIE coarse
MIFREADC=            103864117 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1044 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  522 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   55 / Observation number
IHDRCNT =                  151 / Number of headers currently in EDAC RAM
IIMGCNT =                  151 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37154296 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3171 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.27328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1045 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  523 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36661 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32457281 / Exposure Start Time: MIE coarse
MIFTIMES=            103862680 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32457281 / Exposure Complete: MIE coarse
MIFTIMEC=            103862681 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32457281 / Readout Start: MIE coarse
MIFREADS=            103862681 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32457505 / Readout Complete: MIE coarse
MIFREADC=            103863399 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1046 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  523 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   54 / Observation number
IHDRCNT =                  150 / Number of headers currently in EDAC RAM
IIMGCNT =                  150 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37116208 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3150 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.14428 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1047 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  524 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36660 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32457057 / Exposure Start Time: MIE coarse
MIFTIMES=            103861962 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32457057 / Exposure Complete: MIE coarse
MIFTIMEC=            103861963 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32457057 / Readout Start: MIE coarse
MIFREADS=            103861963 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32457281 / Readout Complete: MIE coarse
MIFREADC=            103862680 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1048 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  524 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   53 / Observation number
IHDRCNT =                  149 / Number of headers currently in EDAC RAM
IIMGCNT =                  149 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37078120 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3129 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   51 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   51 / CS memory monitor #5
ICSMEM06=                   51 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   51 / CS memory monitor #9
ICSMEM10=                   51 / CS memory monitor #10
ICSMEM11=                   51 / CS memory monitor #11
ICSMEM12=                   51 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   51 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1049 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  525 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36659 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32456832 / Exposure Start Time: MIE coarse
MIFTIMES=            103861244 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32456832 / Exposure Complete: MIE coarse
MIFTIMEC=            103861245 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32456832 / Readout Start: MIE coarse
MIFREADS=            103861245 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32457057 / Readout Complete: MIE coarse
MIFREADC=            103861962 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1050 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  525 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   52 / Observation number
IHDRCNT =                  148 / Number of headers currently in EDAC RAM
IIMGCNT =                  148 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37040032 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3108 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.857 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.17347 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   37 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   37 / CS memory monitor #5
ICSMEM06=                   37 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   37 / CS memory monitor #9
ICSMEM10=                   37 / CS memory monitor #10
ICSMEM11=                   37 / CS memory monitor #11
ICSMEM12=                   37 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   37 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1051 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  526 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36658 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32456608 / Exposure Start Time: MIE coarse
MIFTIMES=            103860526 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32456608 / Exposure Complete: MIE coarse
MIFTIMEC=            103860526 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32456608 / Readout Start: MIE coarse
MIFREADS=            103860526 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32456832 / Readout Complete: MIE coarse
MIFREADC=            103861244 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1052 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  526 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   51 / Observation number
IHDRCNT =                  147 / Number of headers currently in EDAC RAM
IIMGCNT =                  147 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37001944 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3087 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96469 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.1832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1053 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  527 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36657 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32456604 / Exposure Start Time: MIE coarse
MIFTIMES=            103860515 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32456604 / Exposure Complete: MIE coarse
MIFTIMEC=            103860515 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32456604 / Readout Start: MIE coarse
MIFREADS=            103860515 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32456608 / Readout Complete: MIE coarse
MIFREADC=            103860526 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1054 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  527 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   50 / Observation number
IHDRCNT =                  146 / Number of headers currently in EDAC RAM
IIMGCNT =                  146 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36963856 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3066 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                40220 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96469 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.26355 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.1832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   44 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1055 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  528 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36656 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32456418 / Exposure Start Time: MIE coarse
MIFTIMES=            103859918 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32456418 / Exposure Complete: MIE coarse
MIFTIMEC=            103859918 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32456418 / Readout Start: MIE coarse
MIFREADS=            103859918 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32456604 / Readout Complete: MIE coarse
MIFREADC=            103860515 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1056 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  528 / extension version number
ROOTNAME= 'ibh719icq                         ' / rootname of the observation set
EXPNAME = 'ibh719icq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   49 / Observation number
IHDRCNT =                  145 / Number of headers currently in EDAC RAM
IIMGCNT =                  145 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             36925768 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3045 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3296 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96469 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -35.8333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9938 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.27815 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.16374 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   10 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   10 / CS memory monitor #5
ICSMEM06=                   10 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   10 / CS memory monitor #9
ICSMEM10=                   10 / CS memory monitor #10
ICSMEM11=                   10 / CS memory monitor #11
ICSMEM12=                   10 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   46 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   43 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  134 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29489 / Major frame count
IMINFCNT=                   10 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1057 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  529 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36687 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32463244 / Exposure Start Time: MIE coarse
MIFTIMES=            103881761 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32463244 / Exposure Complete: MIE coarse
MIFTIMEC=            103881762 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32463244 / Readout Start: MIE coarse
MIFREADS=            103881762 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32463468 / Readout Complete: MIE coarse
MIFREADC=            103882479 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1058 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  529 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   80 / Observation number
IHDRCNT =                  176 / Number of headers currently in EDAC RAM
IIMGCNT =                  176 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38106496 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3696 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40249 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.0859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   87 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   87 / CS memory monitor #5
ICSMEM06=                   87 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   87 / CS memory monitor #9
ICSMEM10=                   87 / CS memory monitor #10
ICSMEM11=                   87 / CS memory monitor #11
ICSMEM12=                   87 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                   87 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1059 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  530 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36686 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32463019 / Exposure Start Time: MIE coarse
MIFTIMES=            103881043 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32463020 / Exposure Complete: MIE coarse
MIFTIMEC=            103881044 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32463020 / Readout Start: MIE coarse
MIFREADS=            103881044 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32463244 / Readout Complete: MIE coarse
MIFREADC=            103881761 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1060 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  530 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   79 / Observation number
IHDRCNT =                  175 / Number of headers currently in EDAC RAM
IIMGCNT =                  175 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38068408 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3675 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.24409 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   73 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   73 / CS memory monitor #5
ICSMEM06=                   73 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   73 / CS memory monitor #9
ICSMEM10=                   73 / CS memory monitor #10
ICSMEM11=                   73 / CS memory monitor #11
ICSMEM12=                   73 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                   73 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1061 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  531 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36685 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32462795 / Exposure Start Time: MIE coarse
MIFTIMES=            103880325 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32462795 / Exposure Complete: MIE coarse
MIFTIMEC=            103880325 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32462795 / Readout Start: MIE coarse
MIFREADS=            103880325 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32463019 / Readout Complete: MIE coarse
MIFREADC=            103881043 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1062 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  531 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   78 / Observation number
IHDRCNT =                  174 / Number of headers currently in EDAC RAM
IIMGCNT =                  174 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38030320 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3654 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.24409 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1063 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  532 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36684 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32462571 / Exposure Start Time: MIE coarse
MIFTIMES=            103879607 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32462571 / Exposure Complete: MIE coarse
MIFTIMEC=            103879607 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32462571 / Readout Start: MIE coarse
MIFREADS=            103879607 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32462795 / Readout Complete: MIE coarse
MIFREADC=            103880325 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1064 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  532 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   77 / Observation number
IHDRCNT =                  173 / Number of headers currently in EDAC RAM
IIMGCNT =                  173 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37992232 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3633 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.23436 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.09563 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1065 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  533 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36683 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32462346 / Exposure Start Time: MIE coarse
MIFTIMES=            103878889 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32462346 / Exposure Complete: MIE coarse
MIFTIMEC=            103878889 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32462346 / Readout Start: MIE coarse
MIFREADS=            103878889 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32462571 / Readout Complete: MIE coarse
MIFREADC=            103879607 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1066 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  533 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   76 / Observation number
IHDRCNT =                  172 / Number of headers currently in EDAC RAM
IIMGCNT =                  172 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37954144 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3612 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1067 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  534 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36682 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32462122 / Exposure Start Time: MIE coarse
MIFTIMES=            103878171 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32462122 / Exposure Complete: MIE coarse
MIFTIMEC=            103878171 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32462122 / Readout Start: MIE coarse
MIFREADS=            103878171 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32462346 / Readout Complete: MIE coarse
MIFREADC=            103878889 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1068 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  534 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   75 / Observation number
IHDRCNT =                  171 / Number of headers currently in EDAC RAM
IIMGCNT =                  171 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37916056 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3591 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.22463 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   15 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   15 / CS memory monitor #5
ICSMEM06=                   15 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   15 / CS memory monitor #9
ICSMEM10=                   15 / CS memory monitor #10
ICSMEM11=                   15 / CS memory monitor #11
ICSMEM12=                   15 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                   15 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1069 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  535 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36681 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32461897 / Exposure Start Time: MIE coarse
MIFTIMES=            103877452 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32461897 / Exposure Complete: MIE coarse
MIFTIMEC=            103877453 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32461897 / Readout Start: MIE coarse
MIFREADS=            103877453 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32462122 / Readout Complete: MIE coarse
MIFREADC=            103878170 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1070 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  535 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   74 / Observation number
IHDRCNT =                  170 / Number of headers currently in EDAC RAM
IIMGCNT =                  170 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37877968 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3570 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.2295 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    1 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    1 / CS memory monitor #5
ICSMEM06=                    1 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    1 / CS memory monitor #9
ICSMEM10=                    1 / CS memory monitor #10
ICSMEM11=                    1 / CS memory monitor #11
ICSMEM12=                    1 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29492 / Major frame count
IMINFCNT=                    1 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1071 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  536 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36680 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32461673 / Exposure Start Time: MIE coarse
MIFTIMES=            103876734 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32461673 / Exposure Complete: MIE coarse
MIFTIMEC=            103876735 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32461673 / Readout Start: MIE coarse
MIFREADS=            103876735 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32461897 / Readout Complete: MIE coarse
MIFREADC=            103877452 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1072 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  536 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   73 / Observation number
IHDRCNT =                  169 / Number of headers currently in EDAC RAM
IIMGCNT =                  169 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37839880 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3549 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40252 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.22463 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  107 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  107 / CS memory monitor #5
ICSMEM06=                  107 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  107 / CS memory monitor #9
ICSMEM10=                  107 / CS memory monitor #10
ICSMEM11=                  107 / CS memory monitor #11
ICSMEM12=                  107 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                  107 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1073 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  537 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36679 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32461449 / Exposure Start Time: MIE coarse
MIFTIMES=            103876016 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32461449 / Exposure Complete: MIE coarse
MIFTIMEC=            103876017 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32461449 / Readout Start: MIE coarse
MIFREADS=            103876017 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32461673 / Readout Complete: MIE coarse
MIFREADC=            103876734 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1074 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  537 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   72 / Observation number
IHDRCNT =                  168 / Number of headers currently in EDAC RAM
IIMGCNT =                  168 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37801792 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3528 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   92 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   92 / CS memory monitor #5
ICSMEM06=                   92 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   92 / CS memory monitor #9
ICSMEM10=                   92 / CS memory monitor #10
ICSMEM11=                   92 / CS memory monitor #11
ICSMEM12=                   92 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   92 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1075 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  538 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36678 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32461224 / Exposure Start Time: MIE coarse
MIFTIMES=            103875298 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32461224 / Exposure Complete: MIE coarse
MIFTIMEC=            103875298 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32461224 / Readout Start: MIE coarse
MIFREADS=            103875298 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32461448 / Readout Complete: MIE coarse
MIFREADC=            103876016 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1076 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  538 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   71 / Observation number
IHDRCNT =                  167 / Number of headers currently in EDAC RAM
IIMGCNT =                  167 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37763704 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3507 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40250 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.6887 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.12482 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1077 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  539 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36677 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32461000 / Exposure Start Time: MIE coarse
MIFTIMES=            103874580 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32461000 / Exposure Complete: MIE coarse
MIFTIMEC=            103874580 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32461000 / Readout Start: MIE coarse
MIFREADS=            103874580 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32461224 / Readout Complete: MIE coarse
MIFREADC=            103875298 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1078 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  539 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   70 / Observation number
IHDRCNT =                  166 / Number of headers currently in EDAC RAM
IIMGCNT =                  166 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37725616 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3486 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.26842 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.14428 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1079 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  540 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36676 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32460775 / Exposure Start Time: MIE coarse
MIFTIMES=            103873862 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32460775 / Exposure Complete: MIE coarse
MIFTIMEC=            103873862 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32460775 / Readout Start: MIE coarse
MIFREADS=            103873862 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32461000 / Readout Complete: MIE coarse
MIFREADC=            103874580 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1080 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  540 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   69 / Observation number
IHDRCNT =                  165 / Number of headers currently in EDAC RAM
IIMGCNT =                  165 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37687528 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3465 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.13455 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   49 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   49 / CS memory monitor #5
ICSMEM06=                   49 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   49 / CS memory monitor #9
ICSMEM10=                   49 / CS memory monitor #10
ICSMEM11=                   49 / CS memory monitor #11
ICSMEM12=                   49 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   49 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1081 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  541 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36675 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32460551 / Exposure Start Time: MIE coarse
MIFTIMES=            103873144 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32460551 / Exposure Complete: MIE coarse
MIFTIMEC=            103873144 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32460551 / Readout Start: MIE coarse
MIFREADS=            103873144 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32460775 / Readout Complete: MIE coarse
MIFREADC=            103873862 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1082 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  541 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   68 / Observation number
IHDRCNT =                  164 / Number of headers currently in EDAC RAM
IIMGCNT =                  164 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37649440 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3444 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8375 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.23923 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.15401 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   35 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   35 / CS memory monitor #5
ICSMEM06=                   35 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   35 / CS memory monitor #9
ICSMEM10=                   35 / CS memory monitor #10
ICSMEM11=                   35 / CS memory monitor #11
ICSMEM12=                   35 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   35 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1083 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  542 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36674 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32460326 / Exposure Start Time: MIE coarse
MIFTIMES=            103872426 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32460327 / Exposure Complete: MIE coarse
MIFTIMEC=            103872426 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32460327 / Readout Start: MIE coarse
MIFREADS=            103872426 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32460551 / Readout Complete: MIE coarse
MIFREADC=            103873144 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1084 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  542 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   67 / Observation number
IHDRCNT =                  163 / Number of headers currently in EDAC RAM
IIMGCNT =                  163 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37611352 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3423 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1085 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  543 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36673 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32460323 / Exposure Start Time: MIE coarse
MIFTIMES=            103872414 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32460323 / Exposure Complete: MIE coarse
MIFTIMEC=            103872415 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32460323 / Readout Start: MIE coarse
MIFREADS=            103872415 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32460326 / Readout Complete: MIE coarse
MIFREADC=            103872426 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1086 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  543 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   66 / Observation number
IHDRCNT =                  162 / Number of headers currently in EDAC RAM
IIMGCNT =                  162 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37573264 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3402 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                40212 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.24896 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   46 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1087 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  544 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36672 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32460136 / Exposure Start Time: MIE coarse
MIFTIMES=            103871817 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32460137 / Exposure Complete: MIE coarse
MIFTIMEC=            103871818 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32460137 / Readout Start: MIE coarse
MIFREADS=            103871818 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32460323 / Readout Complete: MIE coarse
MIFREADC=            103872414 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1088 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  544 / extension version number
ROOTNAME= 'ibh719idq                         ' / rootname of the observation set
EXPNAME = 'ibh719idq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   65 / Observation number
IHDRCNT =                  161 / Number of headers currently in EDAC RAM
IIMGCNT =                  161 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             37535176 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3381 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3297 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.27451 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.64706 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              2.14286 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -34.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              23.0133 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.25869 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.16374 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    8 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    8 / CS memory monitor #5
ICSMEM06=                    8 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    8 / CS memory monitor #9
ICSMEM10=                    8 / CS memory monitor #10
ICSMEM11=                    8 / CS memory monitor #11
ICSMEM12=                    8 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   48 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   45 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  140 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29491 / Major frame count
IMINFCNT=                    8 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1089 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  545 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36703 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32466963 / Exposure Start Time: MIE coarse
MIFTIMES=            103893662 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32466963 / Exposure Complete: MIE coarse
MIFTIMEC=            103893662 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32466963 / Readout Start: MIE coarse
MIFREADS=            103893662 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32467187 / Readout Complete: MIE coarse
MIFREADC=            103894380 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1090 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  545 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   96 / Observation number
IHDRCNT =                  192 / Number of headers currently in EDAC RAM
IIMGCNT =                  192 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38715904 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4032 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.16625 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   85 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   85 / CS memory monitor #5
ICSMEM06=                   85 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   85 / CS memory monitor #9
ICSMEM10=                   85 / CS memory monitor #10
ICSMEM11=                   85 / CS memory monitor #11
ICSMEM12=                   85 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29494 / Major frame count
IMINFCNT=                   85 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1091 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  546 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36702 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32466738 / Exposure Start Time: MIE coarse
MIFTIMES=            103892944 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32466739 / Exposure Complete: MIE coarse
MIFTIMEC=            103892944 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32466739 / Readout Start: MIE coarse
MIFREADS=            103892944 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32466963 / Readout Complete: MIE coarse
MIFREADC=            103893662 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1092 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  546 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   95 / Observation number
IHDRCNT =                  191 / Number of headers currently in EDAC RAM
IIMGCNT =                  191 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38677816 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4011 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.18571 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.0859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   71 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   71 / CS memory monitor #5
ICSMEM06=                   71 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   71 / CS memory monitor #9
ICSMEM10=                   71 / CS memory monitor #10
ICSMEM11=                   71 / CS memory monitor #11
ICSMEM12=                   71 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.07822 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29494 / Major frame count
IMINFCNT=                   71 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1093 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  547 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36701 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32466514 / Exposure Start Time: MIE coarse
MIFTIMES=            103892226 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32466514 / Exposure Complete: MIE coarse
MIFTIMEC=            103892226 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32466514 / Readout Start: MIE coarse
MIFREADS=            103892226 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32466738 / Readout Complete: MIE coarse
MIFREADC=            103892944 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1094 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  547 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   94 / Observation number
IHDRCNT =                  190 / Number of headers currently in EDAC RAM
IIMGCNT =                  190 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38639728 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3990 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.17112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.07617 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29494 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1095 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  548 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36700 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32466290 / Exposure Start Time: MIE coarse
MIFTIMES=            103891507 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32466290 / Exposure Complete: MIE coarse
MIFTIMEC=            103891508 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32466290 / Readout Start: MIE coarse
MIFREADS=            103891508 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32466514 / Readout Complete: MIE coarse
MIFREADC=            103892226 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1096 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  548 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   93 / Observation number
IHDRCNT =                  189 / Number of headers currently in EDAC RAM
IIMGCNT =                  189 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38601640 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3969 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.18085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.09563 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29494 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1097 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  549 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36699 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32466065 / Exposure Start Time: MIE coarse
MIFTIMES=            103890789 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32466065 / Exposure Complete: MIE coarse
MIFTIMEC=            103890790 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32466065 / Readout Start: MIE coarse
MIFREADS=            103890790 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32466290 / Readout Complete: MIE coarse
MIFREADC=            103891507 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1098 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  549 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   92 / Observation number
IHDRCNT =                  188 / Number of headers currently in EDAC RAM
IIMGCNT =                  188 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38563552 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3948 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.20031 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.09563 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29494 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1099 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  550 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36698 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32465841 / Exposure Start Time: MIE coarse
MIFTIMES=            103890071 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32465841 / Exposure Complete: MIE coarse
MIFTIMEC=            103890072 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32465841 / Readout Start: MIE coarse
MIFREADS=            103890072 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32466065 / Readout Complete: MIE coarse
MIFREADC=            103890789 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1100 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  550 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   91 / Observation number
IHDRCNT =                  187 / Number of headers currently in EDAC RAM
IIMGCNT =                  187 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38525464 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3927 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.18085 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   13 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   13 / CS memory monitor #5
ICSMEM06=                   13 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   13 / CS memory monitor #9
ICSMEM10=                   13 / CS memory monitor #10
ICSMEM11=                   13 / CS memory monitor #11
ICSMEM12=                   13 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29494 / Major frame count
IMINFCNT=                   13 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1101 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  551 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36697 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32465616 / Exposure Start Time: MIE coarse
MIFTIMES=            103889353 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32465616 / Exposure Complete: MIE coarse
MIFTIMEC=            103889353 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32465616 / Readout Start: MIE coarse
MIFREADS=            103889353 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32465841 / Readout Complete: MIE coarse
MIFREADC=            103890071 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1102 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  551 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   90 / Observation number
IHDRCNT =                  186 / Number of headers currently in EDAC RAM
IIMGCNT =                  186 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38487376 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3906 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.2149 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  119 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  119 / CS memory monitor #5
ICSMEM06=                  119 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  119 / CS memory monitor #9
ICSMEM10=                  119 / CS memory monitor #10
ICSMEM11=                  119 / CS memory monitor #11
ICSMEM12=                  119 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.07822 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                  119 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1103 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  552 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36696 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32465392 / Exposure Start Time: MIE coarse
MIFTIMES=            103888635 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32465392 / Exposure Complete: MIE coarse
MIFTIMEC=            103888635 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32465392 / Readout Start: MIE coarse
MIFREADS=            103888635 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32465616 / Readout Complete: MIE coarse
MIFREADC=            103889353 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1104 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  552 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   89 / Observation number
IHDRCNT =                  185 / Number of headers currently in EDAC RAM
IIMGCNT =                  185 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38449288 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3885 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.18571 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  105 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  105 / CS memory monitor #5
ICSMEM06=                  105 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  105 / CS memory monitor #9
ICSMEM10=                  105 / CS memory monitor #10
ICSMEM11=                  105 / CS memory monitor #11
ICSMEM12=                  105 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                  105 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1105 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  553 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36695 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32465167 / Exposure Start Time: MIE coarse
MIFTIMES=            103887917 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32465168 / Exposure Complete: MIE coarse
MIFTIMEC=            103887917 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32465168 / Readout Start: MIE coarse
MIFREADS=            103887917 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32465392 / Readout Complete: MIE coarse
MIFREADC=            103888635 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1106 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  553 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   88 / Observation number
IHDRCNT =                  184 / Number of headers currently in EDAC RAM
IIMGCNT =                  184 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38411200 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3864 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.21004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   90 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   90 / CS memory monitor #5
ICSMEM06=                   90 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   90 / CS memory monitor #9
ICSMEM10=                   90 / CS memory monitor #10
ICSMEM11=                   90 / CS memory monitor #11
ICSMEM12=                   90 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   90 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1107 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  554 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36694 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32464943 / Exposure Start Time: MIE coarse
MIFTIMES=            103887199 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32464943 / Exposure Complete: MIE coarse
MIFTIMEC=            103887199 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32464943 / Readout Start: MIE coarse
MIFREADS=            103887199 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32465167 / Readout Complete: MIE coarse
MIFREADC=            103887917 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1108 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  554 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   87 / Observation number
IHDRCNT =                  183 / Number of headers currently in EDAC RAM
IIMGCNT =                  183 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38373112 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3843 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.21004 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1109 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  555 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36693 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32464719 / Exposure Start Time: MIE coarse
MIFTIMES=            103886480 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32464719 / Exposure Complete: MIE coarse
MIFTIMEC=            103886481 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32464719 / Readout Start: MIE coarse
MIFREADS=            103886481 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32464943 / Readout Complete: MIE coarse
MIFREADC=            103887199 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1110 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  555 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   86 / Observation number
IHDRCNT =                  182 / Number of headers currently in EDAC RAM
IIMGCNT =                  182 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38335024 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3822 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.18571 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1111 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  556 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36692 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32464494 / Exposure Start Time: MIE coarse
MIFTIMES=            103885762 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32464494 / Exposure Complete: MIE coarse
MIFTIMEC=            103885763 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32464494 / Readout Start: MIE coarse
MIFREADS=            103885763 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32464719 / Readout Complete: MIE coarse
MIFREADC=            103886480 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1112 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  556 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   85 / Observation number
IHDRCNT =                  181 / Number of headers currently in EDAC RAM
IIMGCNT =                  181 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38296936 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3801 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.41936 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.22463 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.11509 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   47 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   47 / CS memory monitor #5
ICSMEM06=                   47 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   47 / CS memory monitor #9
ICSMEM10=                   47 / CS memory monitor #10
ICSMEM11=                   47 / CS memory monitor #11
ICSMEM12=                   47 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   47 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1113 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  557 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36691 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32464270 / Exposure Start Time: MIE coarse
MIFTIMES=            103885044 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32464270 / Exposure Complete: MIE coarse
MIFTIMEC=            103885045 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32464270 / Readout Start: MIE coarse
MIFREADS=            103885045 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32464494 / Readout Complete: MIE coarse
MIFREADC=            103885762 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1114 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  557 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   84 / Observation number
IHDRCNT =                  180 / Number of headers currently in EDAC RAM
IIMGCNT =                  180 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38258848 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3780 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.22463 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   33 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   33 / CS memory monitor #5
ICSMEM06=                   33 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   33 / CS memory monitor #9
ICSMEM10=                   33 / CS memory monitor #10
ICSMEM11=                   33 / CS memory monitor #11
ICSMEM12=                   33 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   33 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1115 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  558 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36690 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32464045 / Exposure Start Time: MIE coarse
MIFTIMES=            103884326 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32464045 / Exposure Complete: MIE coarse
MIFTIMEC=            103884326 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32464046 / Readout Start: MIE coarse
MIFREADS=            103884326 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32464270 / Readout Complete: MIE coarse
MIFREADC=            103885044 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1116 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  558 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   83 / Observation number
IHDRCNT =                  179 / Number of headers currently in EDAC RAM
IIMGCNT =                  179 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38220760 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3759 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.4941 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1117 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  559 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36689 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32464042 / Exposure Start Time: MIE coarse
MIFTIMES=            103884315 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32464042 / Exposure Complete: MIE coarse
MIFTIMEC=            103884315 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32464042 / Readout Start: MIE coarse
MIFREADS=            103884315 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32464045 / Readout Complete: MIE coarse
MIFREADC=            103884326 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1118 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  559 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   82 / Observation number
IHDRCNT =                  178 / Number of headers currently in EDAC RAM
IIMGCNT =                  178 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38182672 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3738 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                40225 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.4941 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.25382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.10536 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   48 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1119 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  560 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36688 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32463855 / Exposure Start Time: MIE coarse
MIFTIMES=            103883718 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32463856 / Exposure Complete: MIE coarse
MIFTIMEC=            103883718 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32463856 / Readout Start: MIE coarse
MIFREADS=            103883718 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32464042 / Readout Complete: MIE coarse
MIFREADC=            103884315 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1120 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  560 / extension version number
ROOTNAME= 'ibh719ieq                         ' / rootname of the observation set
EXPNAME = 'ibh719ieq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   81 / Observation number
IHDRCNT =                  177 / Number of headers currently in EDAC RAM
IIMGCNT =                  177 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38144584 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 3717 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3298 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.11765 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.4941 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=                  -30 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9547 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.23923 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.0859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    6 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    6 / CS memory monitor #5
ICSMEM06=                    6 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    6 / CS memory monitor #9
ICSMEM10=                    6 / CS memory monitor #10
ICSMEM11=                    6 / CS memory monitor #11
ICSMEM12=                    6 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   50 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   47 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  146 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29493 / Major frame count
IMINFCNT=                    6 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1121 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  561 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36719 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32470681 / Exposure Start Time: MIE coarse
MIFTIMES=            103905561 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32470682 / Exposure Complete: MIE coarse
MIFTIMEC=            103905562 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32470682 / Readout Start: MIE coarse
MIFREADS=            103905562 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32470906 / Readout Complete: MIE coarse
MIFREADC=            103906279 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1122 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  561 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  112 / Observation number
IHDRCNT =                   16 / Number of headers currently in EDAC RAM
IIMGCNT =                   16 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39325312 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  336 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.09328 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   83 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   83 / CS memory monitor #5
ICSMEM06=                   83 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   83 / CS memory monitor #9
ICSMEM10=                   83 / CS memory monitor #10
ICSMEM11=                   83 / CS memory monitor #11
ICSMEM12=                   83 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29496 / Major frame count
IMINFCNT=                   83 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1123 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  562 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36718 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32470457 / Exposure Start Time: MIE coarse
MIFTIMES=            103904843 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32470457 / Exposure Complete: MIE coarse
MIFTIMEC=            103904843 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32470457 / Readout Start: MIE coarse
MIFREADS=            103904843 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32470681 / Readout Complete: MIE coarse
MIFREADC=            103905561 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1124 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  562 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  111 / Observation number
IHDRCNT =                   15 / Number of headers currently in EDAC RAM
IIMGCNT =                   15 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39287224 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  315 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.12733 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   69 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   69 / CS memory monitor #5
ICSMEM06=                   69 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   69 / CS memory monitor #9
ICSMEM10=                   69 / CS memory monitor #10
ICSMEM11=                   69 / CS memory monitor #11
ICSMEM12=                   69 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29496 / Major frame count
IMINFCNT=                   69 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1125 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  563 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36717 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32470233 / Exposure Start Time: MIE coarse
MIFTIMES=            103904125 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32470233 / Exposure Complete: MIE coarse
MIFTIMEC=            103904125 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32470233 / Readout Start: MIE coarse
MIFREADS=            103904125 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32470457 / Readout Complete: MIE coarse
MIFREADC=            103904843 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1126 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  563 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  182 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  110 / Observation number
IHDRCNT =                  206 / Number of headers currently in EDAC RAM
IIMGCNT =                  206 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39249136 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4326 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.08841 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29496 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1127 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  564 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36716 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32470008 / Exposure Start Time: MIE coarse
MIFTIMES=            103903407 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32470008 / Exposure Complete: MIE coarse
MIFTIMEC=            103903407 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32470008 / Readout Start: MIE coarse
MIFREADS=            103903407 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32470233 / Readout Complete: MIE coarse
MIFREADC=            103904125 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1128 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  564 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  163 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  109 / Observation number
IHDRCNT =                  205 / Number of headers currently in EDAC RAM
IIMGCNT =                  205 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39211048 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4305 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.13706 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29496 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1129 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  565 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36715 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32469784 / Exposure Start Time: MIE coarse
MIFTIMES=            103902689 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32469784 / Exposure Complete: MIE coarse
MIFTIMEC=            103902689 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32469784 / Readout Start: MIE coarse
MIFREADS=            103902689 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32470008 / Readout Complete: MIE coarse
MIFREADC=            103903407 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1130 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  565 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  143 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  108 / Observation number
IHDRCNT =                  204 / Number of headers currently in EDAC RAM
IIMGCNT =                  204 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39172960 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4284 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40263 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=               22.818 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.1322 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29496 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1131 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  566 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36714 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32469559 / Exposure Start Time: MIE coarse
MIFTIMES=            103901971 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32469559 / Exposure Complete: MIE coarse
MIFTIMEC=            103901971 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32469559 / Readout Start: MIE coarse
MIFREADS=            103901971 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32469784 / Readout Complete: MIE coarse
MIFREADC=            103902688 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1132 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  566 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  124 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  107 / Observation number
IHDRCNT =                  203 / Number of headers currently in EDAC RAM
IIMGCNT =                  203 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39134872 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4263 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.10301 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   11 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   11 / CS memory monitor #5
ICSMEM06=                   11 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   11 / CS memory monitor #9
ICSMEM10=                   11 / CS memory monitor #10
ICSMEM11=                   11 / CS memory monitor #11
ICSMEM12=                   11 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29496 / Major frame count
IMINFCNT=                   11 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1133 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  567 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36713 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32469335 / Exposure Start Time: MIE coarse
MIFTIMES=            103901252 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32469335 / Exposure Complete: MIE coarse
MIFTIMEC=            103901253 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32469335 / Readout Start: MIE coarse
MIFREADS=            103901253 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32469559 / Readout Complete: MIE coarse
MIFREADC=            103901971 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1134 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  567 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                  104 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  106 / Observation number
IHDRCNT =                  202 / Number of headers currently in EDAC RAM
IIMGCNT =                  202 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39096784 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4242 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.1322 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.02752 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  117 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  117 / CS memory monitor #5
ICSMEM06=                  117 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  117 / CS memory monitor #9
ICSMEM10=                  117 / CS memory monitor #10
ICSMEM11=                  117 / CS memory monitor #11
ICSMEM12=                  117 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                  117 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1135 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  568 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36712 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32469110 / Exposure Start Time: MIE coarse
MIFTIMES=            103900534 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32469111 / Exposure Complete: MIE coarse
MIFTIMEC=            103900535 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32469111 / Readout Start: MIE coarse
MIFREADS=            103900535 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32469335 / Readout Complete: MIE coarse
MIFREADC=            103901252 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1136 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  568 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   84 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  105 / Observation number
IHDRCNT =                  201 / Number of headers currently in EDAC RAM
IIMGCNT =                  201 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39058696 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4221 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40264 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.14679 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.04698 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  103 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  103 / CS memory monitor #5
ICSMEM06=                  103 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  103 / CS memory monitor #9
ICSMEM10=                  103 / CS memory monitor #10
ICSMEM11=                  103 / CS memory monitor #11
ICSMEM12=                  103 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                  103 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1137 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  569 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36711 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32468886 / Exposure Start Time: MIE coarse
MIFTIMES=            103899816 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32468886 / Exposure Complete: MIE coarse
MIFTIMEC=            103899817 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32468886 / Readout Start: MIE coarse
MIFREADS=            103899817 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32469110 / Readout Complete: MIE coarse
MIFREADC=            103900534 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1138 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  569 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   64 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  104 / Observation number
IHDRCNT =                  200 / Number of headers currently in EDAC RAM
IIMGCNT =                  200 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             39020608 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4200 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40266 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.16625 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   88 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   88 / CS memory monitor #5
ICSMEM06=                   88 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   88 / CS memory monitor #9
ICSMEM10=                   88 / CS memory monitor #10
ICSMEM11=                   88 / CS memory monitor #11
ICSMEM12=                   88 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   88 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1139 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  570 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36710 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32468662 / Exposure Start Time: MIE coarse
MIFTIMES=            103899098 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32468662 / Exposure Complete: MIE coarse
MIFTIMEC=            103899098 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32468662 / Readout Start: MIE coarse
MIFREADS=            103899098 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32468886 / Readout Complete: MIE coarse
MIFREADC=            103899816 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1140 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  570 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   45 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  103 / Observation number
IHDRCNT =                  199 / Number of headers currently in EDAC RAM
IIMGCNT =                  199 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38982520 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4179 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.15166 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   74 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   74 / CS memory monitor #5
ICSMEM06=                   74 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   74 / CS memory monitor #9
ICSMEM10=                   74 / CS memory monitor #10
ICSMEM11=                   74 / CS memory monitor #11
ICSMEM12=                   74 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   74 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1141 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  571 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36709 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32468437 / Exposure Start Time: MIE coarse
MIFTIMES=            103898380 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32468437 / Exposure Complete: MIE coarse
MIFTIMEC=            103898380 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32468437 / Readout Start: MIE coarse
MIFREADS=            103898380 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32468662 / Readout Complete: MIE coarse
MIFREADC=            103899098 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1142 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  571 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                   25 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  102 / Observation number
IHDRCNT =                  198 / Number of headers currently in EDAC RAM
IIMGCNT =                  198 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38944432 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4158 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.14193 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   60 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   60 / CS memory monitor #5
ICSMEM06=                   60 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   60 / CS memory monitor #9
ICSMEM10=                   60 / CS memory monitor #10
ICSMEM11=                   60 / CS memory monitor #11
ICSMEM12=                   60 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   60 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1143 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  572 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36708 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32468213 / Exposure Start Time: MIE coarse
MIFTIMES=            103897662 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32468213 / Exposure Complete: MIE coarse
MIFTIMEC=            103897662 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32468213 / Readout Start: MIE coarse
MIFREADS=            103897662 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32468437 / Readout Complete: MIE coarse
MIFREADC=            103898380 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1144 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  572 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'Image   '           / Image or memory dump in progress
IIMGDMPD=                    6 / Number of Images Dumped
ISDFFIFO= '>Half             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  101 / Observation number
IHDRCNT =                  197 / Number of headers currently in EDAC RAM
IIMGCNT =                  197 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38906344 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4137 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40269 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2305 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.17112 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   45 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   45 / CS memory monitor #5
ICSMEM06=                   45 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   45 / CS memory monitor #9
ICSMEM10=                   45 / CS memory monitor #10
ICSMEM11=                   45 / CS memory monitor #11
ICSMEM12=                   45 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.07822 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   54 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   52 / Number of normal MAR's processed by the FSW
ILASTNRM=                  114 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  153 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   45 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1145 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  573 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36707 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32467988 / Exposure Start Time: MIE coarse
MIFTIMES=            103896943 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32467988 / Exposure Complete: MIE coarse
MIFTIMEC=            103896944 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32467988 / Readout Start: MIE coarse
MIFREADS=            103896944 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32468213 / Readout Complete: MIE coarse
MIFREADC=            103897662 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1146 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  573 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  100 / Observation number
IHDRCNT =                  196 / Number of headers currently in EDAC RAM
IIMGCNT =                  196 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38868256 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4116 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.17598 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.05671 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   31 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   31 / CS memory monitor #5
ICSMEM06=                   31 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   31 / CS memory monitor #9
ICSMEM10=                   31 / CS memory monitor #10
ICSMEM11=                   31 / CS memory monitor #11
ICSMEM12=                   31 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   53 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   51 / Number of normal MAR's processed by the FSW
ILASTNRM=                   69 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  152 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   31 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1147 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  574 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36706 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32467764 / Exposure Start Time: MIE coarse
MIFTIMES=            103896225 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32467764 / Exposure Complete: MIE coarse
MIFTIMEC=            103896226 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32467764 / Readout Start: MIE coarse
MIFREADS=            103896226 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32467988 / Readout Complete: MIE coarse
MIFREADC=            103896943 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1148 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  574 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   99 / Observation number
IHDRCNT =                  195 / Number of headers currently in EDAC RAM
IIMGCNT =                  195 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38830168 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4095 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40265 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.15166 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.0859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   52 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   50 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  152 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1149 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  575 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36705 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32467760 / Exposure Start Time: MIE coarse
MIFTIMES=            103896214 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32467761 / Exposure Complete: MIE coarse
MIFTIMEC=            103896214 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32467761 / Readout Start: MIE coarse
MIFREADS=            103896214 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32467764 / Readout Complete: MIE coarse
MIFREADC=            103896225 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1150 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  575 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   98 / Observation number
IHDRCNT =                  194 / Number of headers currently in EDAC RAM
IIMGCNT =                  194 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38792080 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4074 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                40223 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.15166 / IR Cold Enclosure TEC voltage
IRDBTECV=               6.0859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   52 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   50 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  152 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1151 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  576 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36704 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32467574 / Exposure Start Time: MIE coarse
MIFTIMES=            103895617 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32467574 / Exposure Complete: MIE coarse
MIFTIMEC=            103895618 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32467574 / Readout Start: MIE coarse
MIFREADS=            103895618 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32467760 / Readout Complete: MIE coarse
MIFREADC=            103896214 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1152 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  576 / extension version number
ROOTNAME= 'ibh719ifq                         ' / rootname of the observation set
EXPNAME = 'ibh719ifq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                   97 / Observation number
IHDRCNT =                  193 / Number of headers currently in EDAC RAM
IIMGCNT =                  193 / # of images currently stored in CS Buffer memor
IIMGEXTP=             31403008 / Pointer to Image Buffer space of next image
IIMGINSP=             38753992 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 4053 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3299 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              13.5714 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -35 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -36.6667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9743 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.19058 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    4 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    4 / CS memory monitor #5
ICSMEM06=                    4 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    4 / CS memory monitor #9
ICSMEM10=                    4 / CS memory monitor #10
ICSMEM11=                    4 / CS memory monitor #11
ICSMEM12=                    4 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   52 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   49 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  152 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29495 / Major frame count
IMINFCNT=                    4 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1153 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  577 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36735 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32474400 / Exposure Start Time: MIE coarse
MIFTIMES=            103917462 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32474400 / Exposure Complete: MIE coarse
MIFTIMEC=            103917462 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32474400 / Readout Start: MIE coarse
MIFREADS=            103917462 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32474625 / Readout Complete: MIE coarse
MIFREADC=            103918180 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1154 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  577 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  128 / Observation number
IHDRCNT =                   32 / Number of headers currently in EDAC RAM
IIMGCNT =                   32 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39934720 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  672 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.01057 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.94968 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   81 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   81 / CS memory monitor #5
ICSMEM06=                   81 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   81 / CS memory monitor #9
ICSMEM10=                   81 / CS memory monitor #10
ICSMEM11=                   81 / CS memory monitor #11
ICSMEM12=                   81 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29498 / Major frame count
IMINFCNT=                   81 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1155 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  578 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36734 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32474176 / Exposure Start Time: MIE coarse
MIFTIMES=            103916744 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32474176 / Exposure Complete: MIE coarse
MIFTIMEC=            103916744 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32474176 / Readout Start: MIE coarse
MIFREADS=            103916744 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32474400 / Readout Complete: MIE coarse
MIFREADC=            103917462 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1156 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  578 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  127 / Observation number
IHDRCNT =                   31 / Number of headers currently in EDAC RAM
IIMGCNT =                   31 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39896632 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  651 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               6.0203 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.96914 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   67 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   67 / CS memory monitor #5
ICSMEM06=                   67 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   67 / CS memory monitor #9
ICSMEM10=                   67 / CS memory monitor #10
ICSMEM11=                   67 / CS memory monitor #11
ICSMEM12=                   67 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29498 / Major frame count
IMINFCNT=                   67 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1157 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  579 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36733 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32473952 / Exposure Start Time: MIE coarse
MIFTIMES=            103916026 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32473952 / Exposure Complete: MIE coarse
MIFTIMEC=            103916026 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32473952 / Readout Start: MIE coarse
MIFREADS=            103916026 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32474176 / Readout Complete: MIE coarse
MIFREADC=            103916744 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1158 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  579 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  126 / Observation number
IHDRCNT =                   30 / Number of headers currently in EDAC RAM
IIMGCNT =                   30 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39858544 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  630 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.57811 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.04463 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29498 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1159 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  580 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36732 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32473727 / Exposure Start Time: MIE coarse
MIFTIMES=            103915307 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32473727 / Exposure Complete: MIE coarse
MIFTIMEC=            103915308 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32473727 / Readout Start: MIE coarse
MIFREADS=            103915308 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32473952 / Readout Complete: MIE coarse
MIFREADC=            103916026 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1160 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  580 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  125 / Observation number
IHDRCNT =                   29 / Number of headers currently in EDAC RAM
IIMGCNT =                   29 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39820456 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  609 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               6.0203 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   38 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   38 / CS memory monitor #5
ICSMEM06=                   38 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   38 / CS memory monitor #9
ICSMEM10=                   38 / CS memory monitor #10
ICSMEM11=                   38 / CS memory monitor #11
ICSMEM12=                   38 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29498 / Major frame count
IMINFCNT=                   38 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1161 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  581 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36731 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32473503 / Exposure Start Time: MIE coarse
MIFTIMES=            103914589 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32473503 / Exposure Complete: MIE coarse
MIFTIMEC=            103914590 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32473503 / Readout Start: MIE coarse
MIFREADS=            103914590 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32473727 / Readout Complete: MIE coarse
MIFREADC=            103915307 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1162 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  581 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  124 / Observation number
IHDRCNT =                   28 / Number of headers currently in EDAC RAM
IIMGCNT =                   28 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39782368 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  588 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.03003 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   24 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   24 / CS memory monitor #5
ICSMEM06=                   24 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   24 / CS memory monitor #9
ICSMEM10=                   24 / CS memory monitor #10
ICSMEM11=                   24 / CS memory monitor #11
ICSMEM12=                   24 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29498 / Major frame count
IMINFCNT=                   24 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1163 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  582 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36730 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32473278 / Exposure Start Time: MIE coarse
MIFTIMES=            103913871 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32473278 / Exposure Complete: MIE coarse
MIFTIMEC=            103913871 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32473278 / Readout Start: MIE coarse
MIFREADS=            103913872 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32473503 / Readout Complete: MIE coarse
MIFREADC=            103914589 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1164 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  582 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  123 / Observation number
IHDRCNT =                   27 / Number of headers currently in EDAC RAM
IIMGCNT =                   27 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39744280 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  567 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.05922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.96914 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    9 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    9 / CS memory monitor #5
ICSMEM06=                    9 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    9 / CS memory monitor #9
ICSMEM10=                    9 / CS memory monitor #10
ICSMEM11=                    9 / CS memory monitor #11
ICSMEM12=                    9 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29498 / Major frame count
IMINFCNT=                    9 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1165 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  583 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36729 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32473054 / Exposure Start Time: MIE coarse
MIFTIMES=            103913153 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32473054 / Exposure Complete: MIE coarse
MIFTIMEC=            103913153 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32473054 / Readout Start: MIE coarse
MIFREADS=            103913153 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32473278 / Readout Complete: MIE coarse
MIFREADC=            103913871 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1166 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  583 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  122 / Observation number
IHDRCNT =                   26 / Number of headers currently in EDAC RAM
IIMGCNT =                   26 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39706192 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  546 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.03003 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  115 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  115 / CS memory monitor #5
ICSMEM06=                  115 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  115 / CS memory monitor #9
ICSMEM10=                  115 / CS memory monitor #10
ICSMEM11=                  115 / CS memory monitor #11
ICSMEM12=                  115 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                  115 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1167 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  584 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36728 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32472829 / Exposure Start Time: MIE coarse
MIFTIMES=            103912435 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32472830 / Exposure Complete: MIE coarse
MIFTIMEC=            103912435 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32472830 / Readout Start: MIE coarse
MIFREADS=            103912435 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32473054 / Readout Complete: MIE coarse
MIFREADC=            103913153 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1168 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  584 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  121 / Observation number
IHDRCNT =                   25 / Number of headers currently in EDAC RAM
IIMGCNT =                   25 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39668104 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  525 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.06895 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.9886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  101 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  101 / CS memory monitor #5
ICSMEM06=                  101 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  101 / CS memory monitor #9
ICSMEM10=                  101 / CS memory monitor #10
ICSMEM11=                  101 / CS memory monitor #11
ICSMEM12=                  101 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                  101 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1169 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  585 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36727 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32472605 / Exposure Start Time: MIE coarse
MIFTIMES=            103911717 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32472605 / Exposure Complete: MIE coarse
MIFTIMEC=            103911717 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32472605 / Readout Start: MIE coarse
MIFREADS=            103911717 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32472829 / Readout Complete: MIE coarse
MIFREADC=            103912435 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1170 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  585 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  120 / Observation number
IHDRCNT =                   24 / Number of headers currently in EDAC RAM
IIMGCNT =                   24 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39630016 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  504 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.07382 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   86 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   86 / CS memory monitor #5
ICSMEM06=                   86 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   86 / CS memory monitor #9
ICSMEM10=                   86 / CS memory monitor #10
ICSMEM11=                   86 / CS memory monitor #11
ICSMEM12=                   86 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   86 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1171 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  586 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36726 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32472381 / Exposure Start Time: MIE coarse
MIFTIMES=            103910999 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32472381 / Exposure Complete: MIE coarse
MIFTIMEC=            103910999 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32472381 / Readout Start: MIE coarse
MIFREADS=            103910999 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32472605 / Readout Complete: MIE coarse
MIFREADC=            103911717 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1172 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  586 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  119 / Observation number
IHDRCNT =                   23 / Number of headers currently in EDAC RAM
IIMGCNT =                   23 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39591928 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  483 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.09328 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.9886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   72 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   72 / CS memory monitor #5
ICSMEM06=                   72 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   72 / CS memory monitor #9
ICSMEM10=                   72 / CS memory monitor #10
ICSMEM11=                   72 / CS memory monitor #11
ICSMEM12=                   72 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   72 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1173 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  587 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36725 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32472156 / Exposure Start Time: MIE coarse
MIFTIMES=            103910280 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32472156 / Exposure Complete: MIE coarse
MIFTIMEC=            103910281 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32472156 / Readout Start: MIE coarse
MIFREADS=            103910281 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32472381 / Readout Complete: MIE coarse
MIFREADC=            103910998 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1174 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  587 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  118 / Observation number
IHDRCNT =                   22 / Number of headers currently in EDAC RAM
IIMGCNT =                   22 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39553840 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  462 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.09328 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.9886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   58 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   58 / CS memory monitor #5
ICSMEM06=                   58 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   58 / CS memory monitor #9
ICSMEM10=                   58 / CS memory monitor #10
ICSMEM11=                   58 / CS memory monitor #11
ICSMEM12=                   58 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   58 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1175 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  588 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36724 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32471932 / Exposure Start Time: MIE coarse
MIFTIMES=            103909562 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32471932 / Exposure Complete: MIE coarse
MIFTIMEC=            103909563 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32471932 / Readout Start: MIE coarse
MIFREADS=            103909563 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32472156 / Readout Complete: MIE coarse
MIFREADC=            103910280 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1176 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  588 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  117 / Observation number
IHDRCNT =                   21 / Number of headers currently in EDAC RAM
IIMGCNT =                   21 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39515752 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  441 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.07868 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.99833 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   43 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   43 / CS memory monitor #5
ICSMEM06=                   43 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   43 / CS memory monitor #9
ICSMEM10=                   43 / CS memory monitor #10
ICSMEM11=                   43 / CS memory monitor #11
ICSMEM12=                   43 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   43 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1177 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  589 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36723 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32471707 / Exposure Start Time: MIE coarse
MIFTIMES=            103908844 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32471707 / Exposure Complete: MIE coarse
MIFTIMEC=            103908845 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32471707 / Readout Start: MIE coarse
MIFREADS=            103908845 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32471932 / Readout Complete: MIE coarse
MIFREADC=            103909562 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1178 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  589 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  116 / Observation number
IHDRCNT =                   20 / Number of headers currently in EDAC RAM
IIMGCNT =                   20 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39477664 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  420 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.07382 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.00806 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   29 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   29 / CS memory monitor #5
ICSMEM06=                   29 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   29 / CS memory monitor #9
ICSMEM10=                   29 / CS memory monitor #10
ICSMEM11=                   29 / CS memory monitor #11
ICSMEM12=                   29 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.15635 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   29 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1179 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  590 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36722 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32471483 / Exposure Start Time: MIE coarse
MIFTIMES=            103908126 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32471483 / Exposure Complete: MIE coarse
MIFTIMEC=            103908126 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32471483 / Readout Start: MIE coarse
MIFREADS=            103908126 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32471707 / Readout Complete: MIE coarse
MIFREADC=            103908844 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1180 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  590 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  115 / Observation number
IHDRCNT =                   19 / Number of headers currently in EDAC RAM
IIMGCNT =                   19 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39439576 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  399 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40253 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.04949 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1181 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  591 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36721 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32471479 / Exposure Start Time: MIE coarse
MIFTIMES=            103908115 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32471480 / Exposure Complete: MIE coarse
MIFTIMEC=            103908115 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32471480 / Readout Start: MIE coarse
MIFREADS=            103908115 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32471483 / Readout Complete: MIE coarse
MIFREADC=            103908126 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1182 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  591 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  114 / Observation number
IHDRCNT =                   18 / Number of headers currently in EDAC RAM
IIMGCNT =                   18 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39401488 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  378 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                40210 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=                -32.5 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.04949 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   54 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1183 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  592 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36720 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32471293 / Exposure Start Time: MIE coarse
MIFTIMES=            103907518 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32471293 / Exposure Complete: MIE coarse
MIFTIMEC=            103907518 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32471293 / Readout Start: MIE coarse
MIFREADS=            103907518 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32471479 / Readout Complete: MIE coarse
MIFREADC=            103908115 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1184 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  592 / extension version number
ROOTNAME= 'ibh719ihq                         ' / rootname of the observation set
EXPNAME = 'ibh719ihq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  113 / Observation number
IHDRCNT =                   17 / Number of headers currently in EDAC RAM
IIMGCNT =                   17 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39363400 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  357 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3300 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.61717 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.84322 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.02432 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.96078 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =              1.42857 / Electronics Radiator near middle bottom
IDRIRCST=             -30.8333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -35.8333 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -32.5 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=              1.42857 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -31.6667 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.11274 / IR Cold Enclosure TEC voltage
IRDBTECV=              6.03725 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    2 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    2 / CS memory monitor #5
ICSMEM06=                    2 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    2 / CS memory monitor #9
ICSMEM10=                    2 / CS memory monitor #10
ICSMEM11=                    2 / CS memory monitor #11
ICSMEM12=                    2 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   56 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   53 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  159 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29497 / Major frame count
IMINFCNT=                    2 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1185 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  593 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36751 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32478119 / Exposure Start Time: MIE coarse
MIFTIMES=            103929361 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32478119 / Exposure Complete: MIE coarse
MIFTIMEC=            103929362 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32478119 / Readout Start: MIE coarse
MIFREADS=            103929362 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32478343 / Readout Complete: MIE coarse
MIFREADC=            103930079 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1186 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  593 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  144 / Observation number
IHDRCNT =                   48 / Number of headers currently in EDAC RAM
IIMGCNT =                   48 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40544128 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1008 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   79 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   79 / CS memory monitor #5
ICSMEM06=                   79 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   79 / CS memory monitor #9
ICSMEM10=                   79 / CS memory monitor #10
ICSMEM11=                   79 / CS memory monitor #11
ICSMEM12=                   79 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                   79 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1187 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  594 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36750 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32477895 / Exposure Start Time: MIE coarse
MIFTIMES=            103928643 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32477895 / Exposure Complete: MIE coarse
MIFTIMEC=            103928644 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32477895 / Readout Start: MIE coarse
MIFREADS=            103928644 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32478119 / Readout Complete: MIE coarse
MIFREADC=            103929361 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1188 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  594 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  143 / Observation number
IHDRCNT =                   47 / Number of headers currently in EDAC RAM
IIMGCNT =                   47 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40506040 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  987 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40251 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.92787 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   65 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   65 / CS memory monitor #5
ICSMEM06=                   65 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   65 / CS memory monitor #9
ICSMEM10=                   65 / CS memory monitor #10
ICSMEM11=                   65 / CS memory monitor #11
ICSMEM12=                   65 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                   65 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1189 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  595 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36749 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32477670 / Exposure Start Time: MIE coarse
MIFTIMES=            103927925 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32477670 / Exposure Complete: MIE coarse
MIFTIMEC=            103927925 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32477670 / Readout Start: MIE coarse
MIFREADS=            103927925 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32477895 / Readout Complete: MIE coarse
MIFREADC=            103928643 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1190 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  595 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  142 / Observation number
IHDRCNT =                   46 / Number of headers currently in EDAC RAM
IIMGCNT =                   46 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40467952 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  966 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.9376 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1191 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  596 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36748 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32477446 / Exposure Start Time: MIE coarse
MIFTIMES=            103927207 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32477446 / Exposure Complete: MIE coarse
MIFTIMEC=            103927207 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32477446 / Readout Start: MIE coarse
MIFREADS=            103927207 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32477670 / Readout Complete: MIE coarse
MIFREADC=            103927925 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1192 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  596 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  141 / Observation number
IHDRCNT =                   45 / Number of headers currently in EDAC RAM
IIMGCNT =                   45 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40429864 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  945 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.97165 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.8913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   36 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   36 / CS memory monitor #5
ICSMEM06=                   36 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   36 / CS memory monitor #9
ICSMEM10=                   36 / CS memory monitor #10
ICSMEM11=                   36 / CS memory monitor #11
ICSMEM12=                   36 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                   36 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1193 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  597 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36747 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32477221 / Exposure Start Time: MIE coarse
MIFTIMES=            103926489 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32477221 / Exposure Complete: MIE coarse
MIFTIMEC=            103926489 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32477221 / Readout Start: MIE coarse
MIFREADS=            103926489 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32477446 / Readout Complete: MIE coarse
MIFREADC=            103927207 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1194 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  597 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  140 / Observation number
IHDRCNT =                   44 / Number of headers currently in EDAC RAM
IIMGCNT =                   44 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40391776 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  924 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.45322 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.95219 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.91076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   22 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   22 / CS memory monitor #5
ICSMEM06=                   22 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   22 / CS memory monitor #9
ICSMEM10=                   22 / CS memory monitor #10
ICSMEM11=                   22 / CS memory monitor #11
ICSMEM12=                   22 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                   22 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1195 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  598 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36746 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32476997 / Exposure Start Time: MIE coarse
MIFTIMES=            103925771 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32476997 / Exposure Complete: MIE coarse
MIFTIMEC=            103925771 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32476997 / Readout Start: MIE coarse
MIFREADS=            103925771 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32477221 / Readout Complete: MIE coarse
MIFREADC=            103926489 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1196 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  598 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  139 / Observation number
IHDRCNT =                   43 / Number of headers currently in EDAC RAM
IIMGCNT =                   43 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40353688 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  903 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.96192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    7 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    7 / CS memory monitor #5
ICSMEM06=                    7 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    7 / CS memory monitor #9
ICSMEM10=                    7 / CS memory monitor #10
ICSMEM11=                    7 / CS memory monitor #11
ICSMEM12=                    7 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                    7 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1197 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  599 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36745 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32476772 / Exposure Start Time: MIE coarse
MIFTIMES=            103925052 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32476773 / Exposure Complete: MIE coarse
MIFTIMEC=            103925053 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32476773 / Readout Start: MIE coarse
MIFREADS=            103925053 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32476997 / Readout Complete: MIE coarse
MIFREADC=            103925771 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1198 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  599 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  138 / Observation number
IHDRCNT =                   42 / Number of headers currently in EDAC RAM
IIMGCNT =                   42 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40315600 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  882 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.94733 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  113 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  113 / CS memory monitor #5
ICSMEM06=                  113 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  113 / CS memory monitor #9
ICSMEM10=                  113 / CS memory monitor #10
ICSMEM11=                  113 / CS memory monitor #11
ICSMEM12=                  113 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                  113 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1199 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  600 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36744 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32476548 / Exposure Start Time: MIE coarse
MIFTIMES=            103924334 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32476548 / Exposure Complete: MIE coarse
MIFTIMEC=            103924335 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32476548 / Readout Start: MIE coarse
MIFREADS=            103924335 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32476772 / Readout Complete: MIE coarse
MIFREADC=            103925052 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1200 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  600 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  137 / Observation number
IHDRCNT =                   41 / Number of headers currently in EDAC RAM
IIMGCNT =                   41 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40277512 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  861 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40254 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.96679 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   99 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   99 / CS memory monitor #5
ICSMEM06=                   99 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   99 / CS memory monitor #9
ICSMEM10=                   99 / CS memory monitor #10
ICSMEM11=                   99 / CS memory monitor #11
ICSMEM12=                   99 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   99 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1201 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  601 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36743 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32476324 / Exposure Start Time: MIE coarse
MIFTIMES=            103923616 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32476324 / Exposure Complete: MIE coarse
MIFTIMEC=            103923617 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32476324 / Readout Start: MIE coarse
MIFREADS=            103923617 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32476548 / Readout Complete: MIE coarse
MIFREADC=            103924334 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1202 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  601 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  136 / Observation number
IHDRCNT =                   40 / Number of headers currently in EDAC RAM
IIMGCNT =                   40 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40239424 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  840 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.53905 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              6.00084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.92049 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   84 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   84 / CS memory monitor #5
ICSMEM06=                   84 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   84 / CS memory monitor #9
ICSMEM10=                   84 / CS memory monitor #10
ICSMEM11=                   84 / CS memory monitor #11
ICSMEM12=                   84 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   84 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1203 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  602 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36742 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32476099 / Exposure Start Time: MIE coarse
MIFTIMES=            103922898 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32476099 / Exposure Complete: MIE coarse
MIFTIMEC=            103922898 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32476099 / Readout Start: MIE coarse
MIFREADS=            103922898 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32476324 / Readout Complete: MIE coarse
MIFREADC=            103923616 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1204 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  602 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  135 / Observation number
IHDRCNT =                   39 / Number of headers currently in EDAC RAM
IIMGCNT =                   39 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40201336 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  819 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40256 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.96679 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.95941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   70 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   70 / CS memory monitor #5
ICSMEM06=                   70 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   70 / CS memory monitor #9
ICSMEM10=                   70 / CS memory monitor #10
ICSMEM11=                   70 / CS memory monitor #11
ICSMEM12=                   70 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   70 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1205 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  603 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36741 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32475875 / Exposure Start Time: MIE coarse
MIFTIMES=            103922180 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32475875 / Exposure Complete: MIE coarse
MIFTIMEC=            103922180 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32475875 / Readout Start: MIE coarse
MIFREADS=            103922180 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32476099 / Readout Complete: MIE coarse
MIFREADC=            103922898 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1206 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  603 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  134 / Observation number
IHDRCNT =                   38 / Number of headers currently in EDAC RAM
IIMGCNT =                   38 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40163248 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  798 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              6.00571 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   56 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   56 / CS memory monitor #5
ICSMEM06=                   56 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   56 / CS memory monitor #9
ICSMEM10=                   56 / CS memory monitor #10
ICSMEM11=                   56 / CS memory monitor #11
ICSMEM12=                   56 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   56 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1207 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  604 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36740 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32475650 / Exposure Start Time: MIE coarse
MIFTIMES=            103921462 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32475651 / Exposure Complete: MIE coarse
MIFTIMEC=            103921462 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32475651 / Readout Start: MIE coarse
MIFREADS=            103921462 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32475875 / Readout Complete: MIE coarse
MIFREADC=            103922180 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1208 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  604 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  133 / Observation number
IHDRCNT =                   37 / Number of headers currently in EDAC RAM
IIMGCNT =                   37 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40125160 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  777 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.00571 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.96914 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   41 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   41 / CS memory monitor #5
ICSMEM06=                   41 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   41 / CS memory monitor #9
ICSMEM10=                   41 / CS memory monitor #10
ICSMEM11=                   41 / CS memory monitor #11
ICSMEM12=                   41 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   41 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1209 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  605 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36739 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32475426 / Exposure Start Time: MIE coarse
MIFTIMES=            103920744 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32475426 / Exposure Complete: MIE coarse
MIFTIMEC=            103920744 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32475426 / Readout Start: MIE coarse
MIFREADS=            103920744 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32475650 / Readout Complete: MIE coarse
MIFREADC=            103921462 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1210 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  605 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  132 / Observation number
IHDRCNT =                   36 / Number of headers currently in EDAC RAM
IIMGCNT =                   36 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40087072 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  756 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40255 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.98138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.96914 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   27 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   27 / CS memory monitor #5
ICSMEM06=                   27 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   27 / CS memory monitor #9
ICSMEM10=                   27 / CS memory monitor #10
ICSMEM11=                   27 / CS memory monitor #11
ICSMEM12=                   27 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   27 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1211 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  606 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36738 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32475202 / Exposure Start Time: MIE coarse
MIFTIMES=            103920026 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32475202 / Exposure Complete: MIE coarse
MIFTIMEC=            103920026 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32475202 / Readout Start: MIE coarse
MIFREADS=            103920026 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32475426 / Readout Complete: MIE coarse
MIFREADC=            103920744 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1212 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  606 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  131 / Observation number
IHDRCNT =                   35 / Number of headers currently in EDAC RAM
IIMGCNT =                   35 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40048984 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  735 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.0203 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1213 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  607 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36737 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32475198 / Exposure Start Time: MIE coarse
MIFTIMES=            103920014 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32475198 / Exposure Complete: MIE coarse
MIFTIMEC=            103920015 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32475198 / Readout Start: MIE coarse
MIFREADS=            103920015 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32475202 / Readout Complete: MIE coarse
MIFREADC=            103920026 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1214 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  607 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  130 / Observation number
IHDRCNT =                   34 / Number of headers currently in EDAC RAM
IIMGCNT =                   34 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40010896 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  714 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                40213 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                 8.75 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.61433 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               6.0203 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.93995 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   56 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1215 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  608 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36736 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32475012 / Exposure Start Time: MIE coarse
MIFTIMES=            103919418 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32475012 / Exposure Complete: MIE coarse
MIFTIMEC=            103919418 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32475012 / Readout Start: MIE coarse
MIFREADS=            103919418 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32475198 / Readout Complete: MIE coarse
MIFREADC=            103920014 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1216 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  608 / extension version number
ROOTNAME= 'ibh719iiq                         ' / rootname of the observation set
EXPNAME = 'ibh719iiq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  129 / Observation number
IHDRCNT =                   33 / Number of headers currently in EDAC RAM
IIMGCNT =                   33 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             39972808 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                  693 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3301 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=              5.03468 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01729 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.19608 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.72549 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                -37.5 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3407 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              6.00571 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.97887 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    0 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    0 / CS memory monitor #5
ICSMEM06=                    0 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    0 / CS memory monitor #9
ICSMEM10=                    0 / CS memory monitor #10
ICSMEM11=                    0 / CS memory monitor #11
ICSMEM12=                    0 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              5.00009 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   58 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   55 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  165 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29499 / Major frame count
IMINFCNT=                    0 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1217 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  609 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36767 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32481838 / Exposure Start Time: MIE coarse
MIFTIMES=            103941262 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32481838 / Exposure Complete: MIE coarse
MIFTIMEC=            103941262 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32481838 / Readout Start: MIE coarse
MIFREADS=            103941262 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32482062 / Readout Complete: MIE coarse
MIFREADC=            103941980 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1218 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  609 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  160 / Observation number
IHDRCNT =                   64 / Number of headers currently in EDAC RAM
IIMGCNT =                   64 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41153536 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1344 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.85976 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   77 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   77 / CS memory monitor #5
ICSMEM06=                   77 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   77 / CS memory monitor #9
ICSMEM10=                   77 / CS memory monitor #10
ICSMEM11=                   77 / CS memory monitor #11
ICSMEM12=                   77 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                   77 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1219 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  610 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36766 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32481613 / Exposure Start Time: MIE coarse
MIFTIMES=            103940543 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32481614 / Exposure Complete: MIE coarse
MIFTIMEC=            103940544 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32481614 / Readout Start: MIE coarse
MIFREADS=            103940544 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32481838 / Readout Complete: MIE coarse
MIFREADC=            103941262 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1220 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  610 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  159 / Observation number
IHDRCNT =                   63 / Number of headers currently in EDAC RAM
IIMGCNT =                   63 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41115448 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1323 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.60947 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.83057 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.84265 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   63 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   63 / CS memory monitor #5
ICSMEM06=                   63 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   63 / CS memory monitor #9
ICSMEM10=                   63 / CS memory monitor #10
ICSMEM11=                   63 / CS memory monitor #11
ICSMEM12=                   63 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                   63 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1221 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  611 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36765 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32481389 / Exposure Start Time: MIE coarse
MIFTIMES=            103939826 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32481389 / Exposure Complete: MIE coarse
MIFTIMEC=            103939826 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32481389 / Readout Start: MIE coarse
MIFREADS=            103939826 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32481613 / Readout Complete: MIE coarse
MIFREADC=            103940543 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1222 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  611 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  158 / Observation number
IHDRCNT =                   62 / Number of headers currently in EDAC RAM
IIMGCNT =                   62 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41077360 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1302 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40240 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.87922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.83292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1223 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  612 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36764 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32481165 / Exposure Start Time: MIE coarse
MIFTIMES=            103939107 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32481165 / Exposure Complete: MIE coarse
MIFTIMEC=            103939108 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32481165 / Readout Start: MIE coarse
MIFREADS=            103939108 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32481389 / Readout Complete: MIE coarse
MIFREADC=            103939825 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1224 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  612 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  157 / Observation number
IHDRCNT =                   61 / Number of headers currently in EDAC RAM
IIMGCNT =                   61 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41039272 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1281 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.88409 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.86211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   34 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   34 / CS memory monitor #5
ICSMEM06=                   34 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   34 / CS memory monitor #9
ICSMEM10=                   34 / CS memory monitor #10
ICSMEM11=                   34 / CS memory monitor #11
ICSMEM12=                   34 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                   34 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1225 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  613 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36763 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32480940 / Exposure Start Time: MIE coarse
MIFTIMES=            103938389 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32480940 / Exposure Complete: MIE coarse
MIFTIMEC=            103938390 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32480940 / Readout Start: MIE coarse
MIFREADS=            103938390 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32481165 / Readout Complete: MIE coarse
MIFREADC=            103939107 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1226 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  613 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  156 / Observation number
IHDRCNT =                   60 / Number of headers currently in EDAC RAM
IIMGCNT =                   60 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41001184 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1260 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.85976 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.86211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   20 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   20 / CS memory monitor #5
ICSMEM06=                   20 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   20 / CS memory monitor #9
ICSMEM10=                   20 / CS memory monitor #10
ICSMEM11=                   20 / CS memory monitor #11
ICSMEM12=                   20 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                   20 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1227 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  614 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36762 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32480716 / Exposure Start Time: MIE coarse
MIFTIMES=            103937671 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32480716 / Exposure Complete: MIE coarse
MIFTIMEC=            103937671 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32480716 / Readout Start: MIE coarse
MIFREADS=            103937671 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32480940 / Readout Complete: MIE coarse
MIFREADC=            103938389 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1228 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  614 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  155 / Observation number
IHDRCNT =                   59 / Number of headers currently in EDAC RAM
IIMGCNT =                   59 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40963096 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1239 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40240 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.88409 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.86211 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    5 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    5 / CS memory monitor #5
ICSMEM06=                    5 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    5 / CS memory monitor #9
ICSMEM10=                    5 / CS memory monitor #10
ICSMEM11=                    5 / CS memory monitor #11
ICSMEM12=                    5 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                    5 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1229 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  615 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36761 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32480491 / Exposure Start Time: MIE coarse
MIFTIMES=            103936953 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32480491 / Exposure Complete: MIE coarse
MIFTIMEC=            103936953 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32480491 / Readout Start: MIE coarse
MIFREADS=            103936953 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32480716 / Readout Complete: MIE coarse
MIFREADC=            103937671 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1230 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  615 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  154 / Observation number
IHDRCNT =                   58 / Number of headers currently in EDAC RAM
IIMGCNT =                   58 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40925008 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1218 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40241 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.88409 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  111 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  111 / CS memory monitor #5
ICSMEM06=                  111 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  111 / CS memory monitor #9
ICSMEM10=                  111 / CS memory monitor #10
ICSMEM11=                  111 / CS memory monitor #11
ICSMEM12=                  111 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                  111 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1231 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  616 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36760 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32480267 / Exposure Start Time: MIE coarse
MIFTIMES=            103936235 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32480267 / Exposure Complete: MIE coarse
MIFTIMEC=            103936235 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32480267 / Readout Start: MIE coarse
MIFREADS=            103936235 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32480491 / Readout Complete: MIE coarse
MIFREADC=            103936953 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1232 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  616 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  153 / Observation number
IHDRCNT =                   57 / Number of headers currently in EDAC RAM
IIMGCNT =                   57 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40886920 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1197 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.45322 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.89382 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.87184 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   97 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   97 / CS memory monitor #5
ICSMEM06=                   97 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   97 / CS memory monitor #9
ICSMEM10=                   97 / CS memory monitor #10
ICSMEM11=                   97 / CS memory monitor #11
ICSMEM12=                   97 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   97 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1233 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  617 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36759 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32480043 / Exposure Start Time: MIE coarse
MIFTIMES=            103935517 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32480043 / Exposure Complete: MIE coarse
MIFTIMEC=            103935517 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32480043 / Readout Start: MIE coarse
MIFREADS=            103935517 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32480267 / Readout Complete: MIE coarse
MIFREADC=            103936235 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1234 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  617 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  152 / Observation number
IHDRCNT =                   56 / Number of headers currently in EDAC RAM
IIMGCNT =                   56 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40848832 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1176 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.89382 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   82 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   82 / CS memory monitor #5
ICSMEM06=                   82 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   82 / CS memory monitor #9
ICSMEM10=                   82 / CS memory monitor #10
ICSMEM11=                   82 / CS memory monitor #11
ICSMEM12=                   82 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   82 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1235 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  618 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36758 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32479818 / Exposure Start Time: MIE coarse
MIFTIMES=            103934798 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32479818 / Exposure Complete: MIE coarse
MIFTIMEC=            103934799 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32479818 / Readout Start: MIE coarse
MIFREADS=            103934799 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32480042 / Readout Complete: MIE coarse
MIFREADC=            103935516 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1236 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  618 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  151 / Observation number
IHDRCNT =                   55 / Number of headers currently in EDAC RAM
IIMGCNT =                   55 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40810744 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1155 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40239 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.89868 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.8913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   68 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   68 / CS memory monitor #5
ICSMEM06=                   68 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   68 / CS memory monitor #9
ICSMEM10=                   68 / CS memory monitor #10
ICSMEM11=                   68 / CS memory monitor #11
ICSMEM12=                   68 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   68 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1237 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  619 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36757 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32479594 / Exposure Start Time: MIE coarse
MIFTIMES=            103934080 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32479594 / Exposure Complete: MIE coarse
MIFTIMEC=            103934081 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32479594 / Readout Start: MIE coarse
MIFREADS=            103934081 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32479818 / Readout Complete: MIE coarse
MIFREADC=            103934798 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1238 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  619 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  150 / Observation number
IHDRCNT =                   54 / Number of headers currently in EDAC RAM
IIMGCNT =                   54 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40772656 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1134 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.91814 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.8913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   54 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   54 / CS memory monitor #5
ICSMEM06=                   54 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   54 / CS memory monitor #9
ICSMEM10=                   54 / CS memory monitor #10
ICSMEM11=                   54 / CS memory monitor #11
ICSMEM12=                   54 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   54 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1239 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  620 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36756 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32479369 / Exposure Start Time: MIE coarse
MIFTIMES=            103933362 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32479369 / Exposure Complete: MIE coarse
MIFTIMEC=            103933363 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32479369 / Readout Start: MIE coarse
MIFREADS=            103933363 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32479594 / Readout Complete: MIE coarse
MIFREADC=            103934080 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1240 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  620 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  149 / Observation number
IHDRCNT =                   53 / Number of headers currently in EDAC RAM
IIMGCNT =                   53 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40734568 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1113 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.90355 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   39 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   39 / CS memory monitor #5
ICSMEM06=                   39 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   39 / CS memory monitor #9
ICSMEM10=                   39 / CS memory monitor #10
ICSMEM11=                   39 / CS memory monitor #11
ICSMEM12=                   39 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   39 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1241 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  621 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36755 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32479145 / Exposure Start Time: MIE coarse
MIFTIMES=            103932644 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32479145 / Exposure Complete: MIE coarse
MIFTIMEC=            103932644 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32479145 / Readout Start: MIE coarse
MIFREADS=            103932644 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32479369 / Readout Complete: MIE coarse
MIFREADC=            103933362 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1242 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  621 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  148 / Observation number
IHDRCNT =                   52 / Number of headers currently in EDAC RAM
IIMGCNT =                   52 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40696480 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1092 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40240 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =             0.002442 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.65373 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.89382 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   25 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   25 / CS memory monitor #5
ICSMEM06=                   25 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   25 / CS memory monitor #9
ICSMEM10=                   25 / CS memory monitor #10
ICSMEM11=                   25 / CS memory monitor #11
ICSMEM12=                   25 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   25 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1243 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  622 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36754 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32478920 / Exposure Start Time: MIE coarse
MIFTIMES=            103931926 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32478921 / Exposure Complete: MIE coarse
MIFTIMEC=            103931926 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32478921 / Readout Start: MIE coarse
MIFREADS=            103931926 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32479145 / Readout Complete: MIE coarse
MIFREADC=            103932644 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1244 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  622 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  147 / Observation number
IHDRCNT =                   51 / Number of headers currently in EDAC RAM
IIMGCNT =                   51 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40658392 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1071 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40248 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3993 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   10 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   10 / CS memory monitor #5
ICSMEM06=                   10 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   10 / CS memory monitor #9
ICSMEM10=                   10 / CS memory monitor #10
ICSMEM11=                   10 / CS memory monitor #11
ICSMEM12=                   10 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   10 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1245 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  623 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36753 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32478917 / Exposure Start Time: MIE coarse
MIFTIMES=            103931915 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32478917 / Exposure Complete: MIE coarse
MIFTIMEC=            103931915 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32478917 / Readout Start: MIE coarse
MIFREADS=            103931915 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32478920 / Readout Complete: MIE coarse
MIFREADC=            103931926 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1246 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  623 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  146 / Observation number
IHDRCNT =                   50 / Number of headers currently in EDAC RAM
IIMGCNT =                   50 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40620304 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1050 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                40206 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3993 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.88157 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   10 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   10 / CS memory monitor #5
ICSMEM06=                   10 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   10 / CS memory monitor #9
ICSMEM10=                   10 / CS memory monitor #10
ICSMEM11=                   10 / CS memory monitor #11
ICSMEM12=                   10 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   58 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29501 / Major frame count
IMINFCNT=                   10 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1247 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  624 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36752 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32478730 / Exposure Start Time: MIE coarse
MIFTIMES=            103931318 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32478731 / Exposure Complete: MIE coarse
MIFTIMEC=            103931318 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32478731 / Readout Start: MIE coarse
MIFREADS=            103931318 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32478917 / Readout Complete: MIE coarse
MIFREADC=            103931914 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1248 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  624 / extension version number
ROOTNAME= 'ibh719ijq                         ' / rootname of the observation set
EXPNAME = 'ibh719ijq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  145 / Observation number
IHDRCNT =                   49 / Number of headers currently in EDAC RAM
IIMGCNT =                   49 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             40582216 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1029 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3302 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.65373 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.49412 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.69382 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.96078 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68347 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.88235 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.494408 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=             -31.6667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -36.6667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3993 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.93273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.90103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  118 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  118 / CS memory monitor #5
ICSMEM06=                  118 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  118 / CS memory monitor #9
ICSMEM10=                  118 / CS memory monitor #10
ICSMEM11=                  118 / CS memory monitor #11
ICSMEM12=                  118 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   60 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   57 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  171 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29500 / Major frame count
IMINFCNT=                  118 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1249 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  625 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36783 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32485556 / Exposure Start Time: MIE coarse
MIFTIMES=            103953161 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32485557 / Exposure Complete: MIE coarse
MIFTIMEC=            103953161 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32485557 / Readout Start: MIE coarse
MIFREADS=            103953161 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32485781 / Readout Complete: MIE coarse
MIFREADC=            103953879 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1250 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  625 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  176 / Observation number
IHDRCNT =                   80 / Number of headers currently in EDAC RAM
IIMGCNT =                   80 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41762944 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1680 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40262 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.40391 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.76733 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   75 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   75 / CS memory monitor #5
ICSMEM06=                   75 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   75 / CS memory monitor #9
ICSMEM10=                   75 / CS memory monitor #10
ICSMEM11=                   75 / CS memory monitor #11
ICSMEM12=                   75 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                   75 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1251 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  626 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36782 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32485332 / Exposure Start Time: MIE coarse
MIFTIMES=            103952443 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32485332 / Exposure Complete: MIE coarse
MIFTIMEC=            103952443 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32485332 / Readout Start: MIE coarse
MIFREADS=            103952443 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32485556 / Readout Complete: MIE coarse
MIFREADC=            103953161 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1252 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  626 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  175 / Observation number
IHDRCNT =                   79 / Number of headers currently in EDAC RAM
IIMGCNT =                   79 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41724856 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1659 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40257 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.79165 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.75508 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   61 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   61 / CS memory monitor #5
ICSMEM06=                   61 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   61 / CS memory monitor #9
ICSMEM10=                   61 / CS memory monitor #10
ICSMEM11=                   61 / CS memory monitor #11
ICSMEM12=                   61 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                   61 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1253 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  627 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36781 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32485108 / Exposure Start Time: MIE coarse
MIFTIMES=            103951725 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32485108 / Exposure Complete: MIE coarse
MIFTIMEC=            103951725 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32485108 / Readout Start: MIE coarse
MIFREADS=            103951725 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32485332 / Readout Complete: MIE coarse
MIFREADC=            103952443 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1254 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  627 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  174 / Observation number
IHDRCNT =                   78 / Number of headers currently in EDAC RAM
IIMGCNT =                   78 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41686768 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1638 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.57811 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.78679 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   46 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   46 / CS memory monitor #5
ICSMEM06=                   46 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   46 / CS memory monitor #9
ICSMEM10=                   46 / CS memory monitor #10
ICSMEM11=                   46 / CS memory monitor #11
ICSMEM12=                   46 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                   46 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1255 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  628 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36780 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32484883 / Exposure Start Time: MIE coarse
MIFTIMES=            103951006 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32484883 / Exposure Complete: MIE coarse
MIFTIMEC=            103951007 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32484883 / Readout Start: MIE coarse
MIFREADS=            103951007 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32485108 / Readout Complete: MIE coarse
MIFREADC=            103951724 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1256 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  628 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  173 / Observation number
IHDRCNT =                   77 / Number of headers currently in EDAC RAM
IIMGCNT =                   77 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41648680 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1617 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.75273 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   32 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   32 / CS memory monitor #5
ICSMEM06=                   32 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   32 / CS memory monitor #9
ICSMEM10=                   32 / CS memory monitor #10
ICSMEM11=                   32 / CS memory monitor #11
ICSMEM12=                   32 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                   32 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1257 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  629 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36779 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32484659 / Exposure Start Time: MIE coarse
MIFTIMES=            103950288 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32484659 / Exposure Complete: MIE coarse
MIFTIMEC=            103950289 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32484659 / Readout Start: MIE coarse
MIFREADS=            103950289 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32484883 / Readout Complete: MIE coarse
MIFREADC=            103951006 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1258 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  629 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  172 / Observation number
IHDRCNT =                   76 / Number of headers currently in EDAC RAM
IIMGCNT =                   76 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41610592 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1596 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.80138 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   18 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   18 / CS memory monitor #5
ICSMEM06=                   18 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   18 / CS memory monitor #9
ICSMEM10=                   18 / CS memory monitor #10
ICSMEM11=                   18 / CS memory monitor #11
ICSMEM12=                   18 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                   18 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1259 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  630 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36778 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32484434 / Exposure Start Time: MIE coarse
MIFTIMES=            103949570 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32484434 / Exposure Complete: MIE coarse
MIFTIMEC=            103949571 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32484434 / Readout Start: MIE coarse
MIFREADS=            103949571 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32484659 / Readout Complete: MIE coarse
MIFREADC=            103950288 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1260 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  630 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  171 / Observation number
IHDRCNT =                   75 / Number of headers currently in EDAC RAM
IIMGCNT =                   75 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41572504 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1575 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.7576 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.794 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    3 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    3 / CS memory monitor #5
ICSMEM06=                    3 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    3 / CS memory monitor #9
ICSMEM10=                    3 / CS memory monitor #10
ICSMEM11=                    3 / CS memory monitor #11
ICSMEM12=                    3 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                    3 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1261 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  631 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36777 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32484210 / Exposure Start Time: MIE coarse
MIFTIMES=            103948852 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32484210 / Exposure Complete: MIE coarse
MIFTIMEC=            103948852 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32484210 / Readout Start: MIE coarse
MIFREADS=            103948852 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32484434 / Readout Complete: MIE coarse
MIFREADC=            103949570 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1262 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  631 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  170 / Observation number
IHDRCNT =                   74 / Number of headers currently in EDAC RAM
IIMGCNT =                   74 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41534416 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1554 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.78192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.77454 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  109 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  109 / CS memory monitor #5
ICSMEM06=                  109 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  109 / CS memory monitor #9
ICSMEM10=                  109 / CS memory monitor #10
ICSMEM11=                  109 / CS memory monitor #11
ICSMEM12=                  109 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                  109 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1263 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  632 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36776 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32483985 / Exposure Start Time: MIE coarse
MIFTIMES=            103948134 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32483986 / Exposure Complete: MIE coarse
MIFTIMEC=            103948134 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32483986 / Readout Start: MIE coarse
MIFREADS=            103948134 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32484210 / Readout Complete: MIE coarse
MIFREADC=            103948852 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1264 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  632 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  169 / Observation number
IHDRCNT =                   73 / Number of headers currently in EDAC RAM
IIMGCNT =                   73 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41496328 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1533 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.76733 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.794 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   95 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   95 / CS memory monitor #5
ICSMEM06=                   95 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   95 / CS memory monitor #9
ICSMEM10=                   95 / CS memory monitor #10
ICSMEM11=                   95 / CS memory monitor #11
ICSMEM12=                   95 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                   95 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1265 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  633 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36775 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32483761 / Exposure Start Time: MIE coarse
MIFTIMES=            103947416 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32483761 / Exposure Complete: MIE coarse
MIFTIMEC=            103947416 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32483761 / Readout Start: MIE coarse
MIFREADS=            103947416 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32483985 / Readout Complete: MIE coarse
MIFREADC=            103948134 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1266 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  633 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  168 / Observation number
IHDRCNT =                   72 / Number of headers currently in EDAC RAM
IIMGCNT =                   72 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41458240 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1512 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40259 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.82084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.80373 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   80 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   80 / CS memory monitor #5
ICSMEM06=                   80 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   80 / CS memory monitor #9
ICSMEM10=                   80 / CS memory monitor #10
ICSMEM11=                   80 / CS memory monitor #11
ICSMEM12=                   80 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                   80 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1267 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  634 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36774 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32483537 / Exposure Start Time: MIE coarse
MIFTIMES=            103946698 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32483537 / Exposure Complete: MIE coarse
MIFTIMEC=            103946698 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32483537 / Readout Start: MIE coarse
MIFREADS=            103946698 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32483761 / Readout Complete: MIE coarse
MIFREADC=            103947416 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1268 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  634 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  167 / Observation number
IHDRCNT =                   71 / Number of headers currently in EDAC RAM
IIMGCNT =                   71 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41420152 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1491 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.81598 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.78427 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   66 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   66 / CS memory monitor #5
ICSMEM06=                   66 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   66 / CS memory monitor #9
ICSMEM10=                   66 / CS memory monitor #10
ICSMEM11=                   66 / CS memory monitor #11
ICSMEM12=                   66 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                   66 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1269 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  635 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36773 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32483312 / Exposure Start Time: MIE coarse
MIFTIMES=            103945979 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32483312 / Exposure Complete: MIE coarse
MIFTIMEC=            103945980 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32483312 / Readout Start: MIE coarse
MIFREADS=            103945980 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32483537 / Readout Complete: MIE coarse
MIFREADC=            103946697 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1270 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  635 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  166 / Observation number
IHDRCNT =                   70 / Number of headers currently in EDAC RAM
IIMGCNT =                   70 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41382064 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1470 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40260 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=               5.8403 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.794 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   52 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   52 / CS memory monitor #5
ICSMEM06=                   52 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   52 / CS memory monitor #9
ICSMEM10=                   52 / CS memory monitor #10
ICSMEM11=                   52 / CS memory monitor #11
ICSMEM12=                   52 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                   52 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1271 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  636 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36772 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32483088 / Exposure Start Time: MIE coarse
MIFTIMES=            103945261 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32483088 / Exposure Complete: MIE coarse
MIFTIMEC=            103945262 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32483088 / Readout Start: MIE coarse
MIFREADS=            103945262 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32483312 / Readout Complete: MIE coarse
MIFREADC=            103945979 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1272 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  636 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  165 / Observation number
IHDRCNT =                   69 / Number of headers currently in EDAC RAM
IIMGCNT =                   69 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41343976 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1449 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.83057 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.794 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   37 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   37 / CS memory monitor #5
ICSMEM06=                   37 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   37 / CS memory monitor #9
ICSMEM10=                   37 / CS memory monitor #10
ICSMEM11=                   37 / CS memory monitor #11
ICSMEM12=                   37 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                   37 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1273 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  637 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36771 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32482863 / Exposure Start Time: MIE coarse
MIFTIMES=            103944543 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32482863 / Exposure Complete: MIE coarse
MIFTIMEC=            103944544 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32482863 / Readout Start: MIE coarse
MIFREADS=            103944544 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32483088 / Readout Complete: MIE coarse
MIFREADC=            103945261 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1274 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  637 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  164 / Observation number
IHDRCNT =                   68 / Number of headers currently in EDAC RAM
IIMGCNT =                   68 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41305888 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1428 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40261 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.81598 / IR Cold Enclosure TEC voltage
IRDBTECV=                5.794 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   23 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   23 / CS memory monitor #5
ICSMEM06=                   23 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   23 / CS memory monitor #9
ICSMEM10=                   23 / CS memory monitor #10
ICSMEM11=                   23 / CS memory monitor #11
ICSMEM12=                   23 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                   23 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1275 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  638 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36770 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32482639 / Exposure Start Time: MIE coarse
MIFTIMES=            103943825 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32482639 / Exposure Complete: MIE coarse
MIFTIMEC=            103943826 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32482639 / Readout Start: MIE coarse
MIFREADS=            103943826 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32482863 / Readout Complete: MIE coarse
MIFREADC=            103944543 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1276 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  638 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  163 / Observation number
IHDRCNT =                   67 / Number of headers currently in EDAC RAM
IIMGCNT =                   67 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41267800 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1407 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40258 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.82084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.80373 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    8 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    8 / CS memory monitor #5
ICSMEM06=                    8 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    8 / CS memory monitor #9
ICSMEM10=                    8 / CS memory monitor #10
ICSMEM11=                    8 / CS memory monitor #11
ICSMEM12=                    8 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                    8 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1277 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  639 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36769 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32482635 / Exposure Start Time: MIE coarse
MIFTIMES=            103943814 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32482636 / Exposure Complete: MIE coarse
MIFTIMEC=            103943814 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32482636 / Readout Start: MIE coarse
MIFREADS=            103943814 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32482639 / Readout Complete: MIE coarse
MIFREADC=            103943825 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1278 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  639 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  162 / Observation number
IHDRCNT =                   66 / Number of headers currently in EDAC RAM
IIMGCNT =                   66 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41229712 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1386 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                40216 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.82084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.80373 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    8 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    8 / CS memory monitor #5
ICSMEM06=                    8 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    8 / CS memory monitor #9
ICSMEM10=                    8 / CS memory monitor #10
ICSMEM11=                    8 / CS memory monitor #11
ICSMEM12=                    8 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   60 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29503 / Major frame count
IMINFCNT=                    8 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1279 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  640 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36768 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32482449 / Exposure Start Time: MIE coarse
MIFTIMES=            103943217 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32482449 / Exposure Complete: MIE coarse
MIFTIMEC=            103943217 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32482449 / Readout Start: MIE coarse
MIFREADS=            103943217 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32482635 / Readout Complete: MIE coarse
MIFREADC=            103943814 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1280 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  640 / extension version number
ROOTNAME= 'ibh719ikq                         ' / rootname of the observation set
EXPNAME = 'ibh719ikq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  161 / Observation number
IHDRCNT =                   65 / Number of headers currently in EDAC RAM
IIMGCNT =                   65 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41191624 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1365 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3303 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 31.6 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =               4.8486 / +5V input voltage for digital portion of DEB
IRDP15  =              14.6322 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0784 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -3.88235 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =               -14.08 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -4.03922 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =             0.714286 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                -37.5 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -33.3333 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -38.3333 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -1.42857 / UVIS detector evaporator saddle
ICPCONDT=             -33.3333 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.8961 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.81598 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.80373 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  116 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  116 / CS memory monitor #5
ICSMEM06=                  116 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  116 / CS memory monitor #9
ICSMEM10=                  116 / CS memory monitor #10
ICSMEM11=                  116 / CS memory monitor #11
ICSMEM12=                  116 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   62 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   59 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  177 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29502 / Major frame count
IMINFCNT=                  116 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1281 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  641 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36799 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32489275 / Exposure Start Time: MIE coarse
MIFTIMES=            103965062 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32489276 / Exposure Complete: MIE coarse
MIFTIMEC=            103965062 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32489276 / Readout Start: MIE coarse
MIFREADS=            103965062 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32489500 / Readout Complete: MIE coarse
MIFREADC=            103965780 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1282 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  641 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  192 / Observation number
IHDRCNT =                   96 / Number of headers currently in EDAC RAM
IIMGCNT =                   96 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42372352 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2016 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.64084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.61886 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   73 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   73 / CS memory monitor #5
ICSMEM06=                   73 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   73 / CS memory monitor #9
ICSMEM10=                   73 / CS memory monitor #10
ICSMEM11=                   73 / CS memory monitor #11
ICSMEM12=                   73 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                   73 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1283 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  642 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36798 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32489051 / Exposure Start Time: MIE coarse
MIFTIMES=            103964343 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32489051 / Exposure Complete: MIE coarse
MIFTIMEC=            103964344 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32489051 / Readout Start: MIE coarse
MIFREADS=            103964344 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32489275 / Readout Complete: MIE coarse
MIFREADC=            103965061 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1284 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  642 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  191 / Observation number
IHDRCNT =                   95 / Number of headers currently in EDAC RAM
IIMGCNT =                   95 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42334264 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1995 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.67003 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   59 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   59 / CS memory monitor #5
ICSMEM06=                   59 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   59 / CS memory monitor #9
ICSMEM10=                   59 / CS memory monitor #10
ICSMEM11=                   59 / CS memory monitor #11
ICSMEM12=                   59 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                   59 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1285 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  643 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36797 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32488827 / Exposure Start Time: MIE coarse
MIFTIMES=            103963625 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32488827 / Exposure Complete: MIE coarse
MIFTIMEC=            103963626 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32488827 / Readout Start: MIE coarse
MIFREADS=            103963626 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32489051 / Readout Complete: MIE coarse
MIFREADC=            103964343 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1286 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  643 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  190 / Observation number
IHDRCNT =                   94 / Number of headers currently in EDAC RAM
IIMGCNT =                   94 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42296176 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1974 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.9082 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7984 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.63597 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.66751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   44 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   44 / CS memory monitor #5
ICSMEM06=                   44 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   44 / CS memory monitor #9
ICSMEM10=                   44 / CS memory monitor #10
ICSMEM11=                   44 / CS memory monitor #11
ICSMEM12=                   44 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                   44 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1287 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  644 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36796 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32488602 / Exposure Start Time: MIE coarse
MIFTIMES=            103962907 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32488602 / Exposure Complete: MIE coarse
MIFTIMEC=            103962908 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32488602 / Readout Start: MIE coarse
MIFREADS=            103962908 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32488827 / Readout Complete: MIE coarse
MIFREADC=            103963625 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1288 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  644 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  189 / Observation number
IHDRCNT =                   93 / Number of headers currently in EDAC RAM
IIMGCNT =                   93 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42258088 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1953 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.67976 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   30 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   30 / CS memory monitor #5
ICSMEM06=                   30 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   30 / CS memory monitor #9
ICSMEM10=                   30 / CS memory monitor #10
ICSMEM11=                   30 / CS memory monitor #11
ICSMEM12=                   30 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                   30 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1289 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  645 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36795 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32488378 / Exposure Start Time: MIE coarse
MIFTIMES=            103962189 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32488378 / Exposure Complete: MIE coarse
MIFTIMEC=            103962189 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32488378 / Readout Start: MIE coarse
MIFREADS=            103962189 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32488602 / Readout Complete: MIE coarse
MIFREADC=            103962907 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1290 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  645 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  188 / Observation number
IHDRCNT =                   92 / Number of headers currently in EDAC RAM
IIMGCNT =                   92 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42220000 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1932 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40244 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.66516 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.66751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   16 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   16 / CS memory monitor #5
ICSMEM06=                   16 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   16 / CS memory monitor #9
ICSMEM10=                   16 / CS memory monitor #10
ICSMEM11=                   16 / CS memory monitor #11
ICSMEM12=                   16 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                   16 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1291 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  646 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36794 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32488153 / Exposure Start Time: MIE coarse
MIFTIMES=            103961471 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32488153 / Exposure Complete: MIE coarse
MIFTIMEC=            103961471 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32488153 / Readout Start: MIE coarse
MIFREADS=            103961471 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32488378 / Readout Complete: MIE coarse
MIFREADC=            103962189 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1292 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  646 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  187 / Observation number
IHDRCNT =                   91 / Number of headers currently in EDAC RAM
IIMGCNT =                   91 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42181912 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1911 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3993 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.69922 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.64805 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    1 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    1 / CS memory monitor #5
ICSMEM06=                    1 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    1 / CS memory monitor #9
ICSMEM10=                    1 / CS memory monitor #10
ICSMEM11=                    1 / CS memory monitor #11
ICSMEM12=                    1 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                    1 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1293 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  647 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36793 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32487929 / Exposure Start Time: MIE coarse
MIFTIMES=            103960753 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32487929 / Exposure Complete: MIE coarse
MIFTIMEC=            103960753 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32487929 / Readout Start: MIE coarse
MIFREADS=            103960753 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32488153 / Readout Complete: MIE coarse
MIFREADC=            103961471 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1294 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  647 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  186 / Observation number
IHDRCNT =                   90 / Number of headers currently in EDAC RAM
IIMGCNT =                   90 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42143824 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1890 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.67489 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.65778 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  107 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  107 / CS memory monitor #5
ICSMEM06=                  107 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  107 / CS memory monitor #9
ICSMEM10=                  107 / CS memory monitor #10
ICSMEM11=                  107 / CS memory monitor #11
ICSMEM12=                  107 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                  107 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1295 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  648 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36792 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32487704 / Exposure Start Time: MIE coarse
MIFTIMES=            103960035 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32487705 / Exposure Complete: MIE coarse
MIFTIMEC=            103960035 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32487705 / Readout Start: MIE coarse
MIFREADS=            103960035 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32487929 / Readout Complete: MIE coarse
MIFREADC=            103960753 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1296 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  648 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  185 / Observation number
IHDRCNT =                   89 / Number of headers currently in EDAC RAM
IIMGCNT =                   89 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42105736 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1869 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.69435 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.66751 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   93 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   93 / CS memory monitor #5
ICSMEM06=                   93 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   93 / CS memory monitor #9
ICSMEM10=                   93 / CS memory monitor #10
ICSMEM11=                   93 / CS memory monitor #11
ICSMEM12=                   93 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                   93 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Fmt Mech'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1297 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  649 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36791 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32487480 / Exposure Start Time: MIE coarse
MIFTIMES=            103959316 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32487480 / Exposure Complete: MIE coarse
MIFTIMEC=            103959317 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32487480 / Readout Start: MIE coarse
MIFREADS=            103959317 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32487704 / Readout Complete: MIE coarse
MIFREADC=            103960034 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1298 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  649 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  184 / Observation number
IHDRCNT =                   88 / Number of headers currently in EDAC RAM
IIMGCNT =                   88 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42067648 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1848 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.67976 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.67724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   78 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   78 / CS memory monitor #5
ICSMEM06=                   78 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   78 / CS memory monitor #9
ICSMEM10=                   78 / CS memory monitor #10
ICSMEM11=                   78 / CS memory monitor #11
ICSMEM12=                   78 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                   78 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1299 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  650 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36790 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32487256 / Exposure Start Time: MIE coarse
MIFTIMES=            103958598 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32487256 / Exposure Complete: MIE coarse
MIFTIMEC=            103958599 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32487256 / Readout Start: MIE coarse
MIFREADS=            103958599 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32487480 / Readout Complete: MIE coarse
MIFREADC=            103959316 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1300 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  650 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  183 / Observation number
IHDRCNT =                   87 / Number of headers currently in EDAC RAM
IIMGCNT =                   87 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42029560 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1827 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40243 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.69435 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.6967 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   64 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   64 / CS memory monitor #5
ICSMEM06=                   64 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   64 / CS memory monitor #9
ICSMEM10=                   64 / CS memory monitor #10
ICSMEM11=                   64 / CS memory monitor #11
ICSMEM12=                   64 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0864 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                   64 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1301 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  651 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36789 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32487031 / Exposure Start Time: MIE coarse
MIFTIMES=            103957880 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32487031 / Exposure Complete: MIE coarse
MIFTIMEC=            103957881 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32487031 / Readout Start: MIE coarse
MIFREADS=            103957881 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32487256 / Readout Complete: MIE coarse
MIFREADC=            103958598 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1302 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  651 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  182 / Observation number
IHDRCNT =                   86 / Number of headers currently in EDAC RAM
IIMGCNT =                   86 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41991472 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1806 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =               4.6046 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.71381 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.67724 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   50 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   50 / CS memory monitor #5
ICSMEM06=                   50 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   50 / CS memory monitor #9
ICSMEM10=                   50 / CS memory monitor #10
ICSMEM11=                   50 / CS memory monitor #11
ICSMEM12=                   50 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                   50 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1303 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  652 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36788 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32486807 / Exposure Start Time: MIE coarse
MIFTIMES=            103957162 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32486807 / Exposure Complete: MIE coarse
MIFTIMEC=            103957162 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32486807 / Readout Start: MIE coarse
MIFREADS=            103957162 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32487031 / Readout Complete: MIE coarse
MIFREADC=            103957880 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1304 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  652 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  181 / Observation number
IHDRCNT =                   85 / Number of headers currently in EDAC RAM
IIMGCNT =                   85 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41953384 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1785 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40242 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.70895 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.68697 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   35 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   35 / CS memory monitor #5
ICSMEM06=                   35 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   35 / CS memory monitor #9
ICSMEM10=                   35 / CS memory monitor #10
ICSMEM11=                   35 / CS memory monitor #11
ICSMEM12=                   35 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                   35 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1305 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  653 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36787 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32486582 / Exposure Start Time: MIE coarse
MIFTIMES=            103956444 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32486582 / Exposure Complete: MIE coarse
MIFTIMEC=            103956444 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32486582 / Readout Start: MIE coarse
MIFREADS=            103956444 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32486807 / Readout Complete: MIE coarse
MIFREADC=            103957162 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1306 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  653 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  180 / Observation number
IHDRCNT =                   84 / Number of headers currently in EDAC RAM
IIMGCNT =                   84 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41915296 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1764 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40240 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.72354 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.70643 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   21 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   21 / CS memory monitor #5
ICSMEM06=                   21 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   21 / CS memory monitor #9
ICSMEM10=                   21 / CS memory monitor #10
ICSMEM11=                   21 / CS memory monitor #11
ICSMEM12=                   21 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                   21 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1307 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  654 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36786 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32486358 / Exposure Start Time: MIE coarse
MIFTIMES=            103955726 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32486358 / Exposure Complete: MIE coarse
MIFTIMEC=            103955726 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32486358 / Readout Start: MIE coarse
MIFREADS=            103955726 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32486582 / Readout Complete: MIE coarse
MIFREADC=            103956444 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1308 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  654 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  179 / Observation number
IHDRCNT =                   83 / Number of headers currently in EDAC RAM
IIMGCNT =                   83 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41877208 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1743 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40245 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.73814 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.74535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    6 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    6 / CS memory monitor #5
ICSMEM06=                    6 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    6 / CS memory monitor #9
ICSMEM10=                    6 / CS memory monitor #10
ICSMEM11=                    6 / CS memory monitor #11
ICSMEM12=                    6 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                    6 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1309 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  655 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36785 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32486354 / Exposure Start Time: MIE coarse
MIFTIMES=            103955714 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32486355 / Exposure Complete: MIE coarse
MIFTIMEC=            103955715 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32486355 / Readout Start: MIE coarse
MIFREADS=            103955715 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32486358 / Readout Complete: MIE coarse
MIFREADC=            103955726 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1310 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  655 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  178 / Observation number
IHDRCNT =                   82 / Number of headers currently in EDAC RAM
IIMGCNT =                   82 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41839120 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1722 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                40198 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.07617 / IR FPA six-stage TEC voltage
IRCETECV=              5.73814 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.74535 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    6 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    6 / CS memory monitor #5
ICSMEM06=                    6 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    6 / CS memory monitor #9
ICSMEM10=                    6 / CS memory monitor #10
ICSMEM11=                    6 / CS memory monitor #11
ICSMEM12=                    6 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   62 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29505 / Major frame count
IMINFCNT=                    6 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1311 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  656 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36784 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32486168 / Exposure Start Time: MIE coarse
MIFTIMES=            103955118 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32486168 / Exposure Complete: MIE coarse
MIFTIMEC=            103955118 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32486168 / Readout Start: MIE coarse
MIFREADS=            103955118 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32486354 / Readout Complete: MIE coarse
MIFREADC=            103955714 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.96 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1312 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  656 / extension version number
ROOTNAME= 'ibh719ilq                         ' / rootname of the observation set
EXPNAME = 'ibh719ilq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  177 / Observation number
IHDRCNT =                   81 / Number of headers currently in EDAC RAM
IIMGCNT =                   81 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             41801032 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 1701 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3304 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.98022 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=                -32.5 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -38.3333 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=                -32.5 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9352 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59974 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.74787 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.72589 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  114 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  114 / CS memory monitor #5
ICSMEM06=                  114 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  114 / CS memory monitor #9
ICSMEM10=                  114 / CS memory monitor #10
ICSMEM11=                  114 / CS memory monitor #11
ICSMEM12=                  114 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   64 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   61 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  183 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29504 / Major frame count
IMINFCNT=                  114 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1313 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  657 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36815 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32492994 / Exposure Start Time: MIE coarse
MIFTIMES=            103976961 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32492994 / Exposure Complete: MIE coarse
MIFTIMEC=            103976961 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32492994 / Readout Start: MIE coarse
MIFREADS=            103976961 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32493218 / Readout Complete: MIE coarse
MIFREADC=            103977679 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1314 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  657 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  208 / Observation number
IHDRCNT =                  112 / Number of headers currently in EDAC RAM
IIMGCNT =                  112 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42981760 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2352 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40230 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                 8.75 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.55327 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.47292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   71 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   71 / CS memory monitor #5
ICSMEM06=                   71 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   71 / CS memory monitor #9
ICSMEM10=                   71 / CS memory monitor #10
ICSMEM11=                   71 / CS memory monitor #11
ICSMEM12=                   71 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29508 / Major frame count
IMINFCNT=                   71 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1315 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  658 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36814 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32492769 / Exposure Start Time: MIE coarse
MIFTIMES=            103976243 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32492770 / Exposure Complete: MIE coarse
MIFTIMEC=            103976243 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32492770 / Readout Start: MIE coarse
MIFREADS=            103976243 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32492994 / Readout Complete: MIE coarse
MIFREADC=            103976961 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1316 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  658 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  207 / Observation number
IHDRCNT =                  111 / Number of headers currently in EDAC RAM
IIMGCNT =                  111 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42943672 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2331 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40233 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=               5.5484 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.47292 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   57 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   57 / CS memory monitor #5
ICSMEM06=                   57 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   57 / CS memory monitor #9
ICSMEM10=                   57 / CS memory monitor #10
ICSMEM11=                   57 / CS memory monitor #11
ICSMEM12=                   57 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29508 / Major frame count
IMINFCNT=                   57 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1317 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  659 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36813 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32492545 / Exposure Start Time: MIE coarse
MIFTIMES=            103975524 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32492545 / Exposure Complete: MIE coarse
MIFTIMEC=            103975525 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32492545 / Readout Start: MIE coarse
MIFREADS=            103975525 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32492769 / Readout Complete: MIE coarse
MIFREADC=            103976242 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1318 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  659 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  206 / Observation number
IHDRCNT =                  110 / Number of headers currently in EDAC RAM
IIMGCNT =                  110 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42905584 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2310 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40231 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3993 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.55327 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.46319 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   42 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   42 / CS memory monitor #5
ICSMEM06=                   42 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   42 / CS memory monitor #9
ICSMEM10=                   42 / CS memory monitor #10
ICSMEM11=                   42 / CS memory monitor #11
ICSMEM12=                   42 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29508 / Major frame count
IMINFCNT=                   42 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1319 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  660 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36812 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32492321 / Exposure Start Time: MIE coarse
MIFTIMES=            103974806 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32492321 / Exposure Complete: MIE coarse
MIFTIMEC=            103974807 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32492321 / Readout Start: MIE coarse
MIFREADS=            103974807 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32492545 / Readout Complete: MIE coarse
MIFREADC=            103975524 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1320 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  660 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  205 / Observation number
IHDRCNT =                  109 / Number of headers currently in EDAC RAM
IIMGCNT =                  109 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42867496 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2289 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40232 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2436 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3602 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=               5.5484 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.49238 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   28 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   28 / CS memory monitor #5
ICSMEM06=                   28 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   28 / CS memory monitor #9
ICSMEM10=                   28 / CS memory monitor #10
ICSMEM11=                   28 / CS memory monitor #11
ICSMEM12=                   28 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29508 / Major frame count
IMINFCNT=                   28 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1321 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  661 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36811 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32492096 / Exposure Start Time: MIE coarse
MIFTIMES=            103974088 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32492096 / Exposure Complete: MIE coarse
MIFTIMEC=            103974089 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32492096 / Readout Start: MIE coarse
MIFREADS=            103974089 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32492321 / Readout Complete: MIE coarse
MIFREADC=            103974806 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1322 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  661 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  204 / Observation number
IHDRCNT =                  108 / Number of headers currently in EDAC RAM
IIMGCNT =                  108 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42829408 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2268 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40234 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.130226 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.57759 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.51184 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   14 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   14 / CS memory monitor #5
ICSMEM06=                   14 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   14 / CS memory monitor #9
ICSMEM10=                   14 / CS memory monitor #10
ICSMEM11=                   14 / CS memory monitor #11
ICSMEM12=                   14 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29508 / Major frame count
IMINFCNT=                   14 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1323 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  662 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36810 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32491872 / Exposure Start Time: MIE coarse
MIFTIMES=            103973370 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32491872 / Exposure Complete: MIE coarse
MIFTIMEC=            103973370 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32491872 / Readout Start: MIE coarse
MIFREADS=            103973370 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32492096 / Readout Complete: MIE coarse
MIFREADC=            103974088 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1324 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  662 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  203 / Observation number
IHDRCNT =                  107 / Number of headers currently in EDAC RAM
IIMGCNT =                  107 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42791320 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2247 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40230 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =               15.469 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.58246 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.5313 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  119 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  119 / CS memory monitor #5
ICSMEM06=                  119 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  119 / CS memory monitor #9
ICSMEM10=                  119 / CS memory monitor #10
ICSMEM11=                  119 / CS memory monitor #11
ICSMEM12=                  119 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                  119 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1325 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  663 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36809 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32491647 / Exposure Start Time: MIE coarse
MIFTIMES=            103972652 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32491648 / Exposure Complete: MIE coarse
MIFTIMEC=            103972652 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32491648 / Readout Start: MIE coarse
MIFREADS=            103972652 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32491872 / Readout Complete: MIE coarse
MIFREADC=            103973370 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1326 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  663 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  202 / Observation number
IHDRCNT =                  106 / Number of headers currently in EDAC RAM
IIMGCNT =                  106 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42753232 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2226 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    9 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40229 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.59705 / IR Cold Enclosure TEC voltage
IRDBTECV=               5.5313 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  105 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  105 / CS memory monitor #5
ICSMEM06=                  105 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  105 / CS memory monitor #9
ICSMEM10=                  105 / CS memory monitor #10
ICSMEM11=                  105 / CS memory monitor #11
ICSMEM12=                  105 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.00009 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                  105 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'ReadUVIS'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1327 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  664 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36808 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32491423 / Exposure Start Time: MIE coarse
MIFTIMES=            103971934 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32491423 / Exposure Complete: MIE coarse
MIFTIMEC=            103971934 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    9 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32491423 / Readout Start: MIE coarse
MIFREADS=            103971934 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32491647 / Readout Complete: MIE coarse
MIFREADC=            103972652 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1328 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  664 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  201 / Observation number
IHDRCNT =                  105 / Number of headers currently in EDAC RAM
IIMGCNT =                  105 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42715144 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2205 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    8 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40232 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.59705 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.55076 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   91 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   91 / CS memory monitor #5
ICSMEM06=                   91 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   91 / CS memory monitor #9
ICSMEM10=                   91 / CS memory monitor #10
ICSMEM11=                   91 / CS memory monitor #11
ICSMEM12=                   91 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                   91 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1329 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  665 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36807 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32491199 / Exposure Start Time: MIE coarse
MIFTIMES=            103971216 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32491199 / Exposure Complete: MIE coarse
MIFTIMEC=            103971216 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    8 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32491199 / Readout Start: MIE coarse
MIFREADS=            103971216 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32491423 / Readout Complete: MIE coarse
MIFREADC=            103971934 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1330 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  665 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  200 / Observation number
IHDRCNT =                  104 / Number of headers currently in EDAC RAM
IIMGCNT =                  104 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42677056 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2184 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    7 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40234 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59487 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.58732 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.54103 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   76 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   76 / CS memory monitor #5
ICSMEM06=                   76 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   76 / CS memory monitor #9
ICSMEM10=                   76 / CS memory monitor #10
ICSMEM11=                   76 / CS memory monitor #11
ICSMEM12=                   76 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                   76 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1331 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  666 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36806 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32490974 / Exposure Start Time: MIE coarse
MIFTIMES=            103970497 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32490974 / Exposure Complete: MIE coarse
MIFTIMEC=            103970498 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    7 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32490974 / Readout Start: MIE coarse
MIFREADS=            103970498 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32491199 / Readout Complete: MIE coarse
MIFREADC=            103971215 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1332 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  666 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  199 / Observation number
IHDRCNT =                  103 / Number of headers currently in EDAC RAM
IIMGCNT =                  103 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42638968 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2163 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    6 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40233 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =              0.01221 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.61165 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.57022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   62 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   62 / CS memory monitor #5
ICSMEM06=                   62 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   62 / CS memory monitor #9
ICSMEM10=                   62 / CS memory monitor #10
ICSMEM11=                   62 / CS memory monitor #11
ICSMEM12=                   62 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                   62 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1333 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  667 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36805 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32490750 / Exposure Start Time: MIE coarse
MIFTIMES=            103969779 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32490750 / Exposure Complete: MIE coarse
MIFTIMEC=            103969780 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    6 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32490750 / Readout Start: MIE coarse
MIFREADS=            103969780 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32490974 / Readout Complete: MIE coarse
MIFREADC=            103970497 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1334 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  667 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  198 / Observation number
IHDRCNT =                  102 / Number of headers currently in EDAC RAM
IIMGCNT =                  102 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42600880 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2142 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    5 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40234 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 2.92 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.001221 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.60192 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.57022 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   48 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   48 / CS memory monitor #5
ICSMEM06=                   48 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   48 / CS memory monitor #9
ICSMEM10=                   48 / CS memory monitor #10
ICSMEM11=                   48 / CS memory monitor #11
ICSMEM12=                   48 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.07822 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                   48 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1335 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  668 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36804 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32490525 / Exposure Start Time: MIE coarse
MIFTIMES=            103969061 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32490525 / Exposure Complete: MIE coarse
MIFTIMEC=            103969062 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    5 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32490525 / Readout Start: MIE coarse
MIFREADS=            103969062 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32490750 / Readout Complete: MIE coarse
MIFREADC=            103969779 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1336 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  668 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  197 / Observation number
IHDRCNT =                  101 / Number of headers currently in EDAC RAM
IIMGCNT =                  101 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42562792 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2121 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    4 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40233 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.64084 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.60913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   33 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   33 / CS memory monitor #5
ICSMEM06=                   33 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   33 / CS memory monitor #9
ICSMEM10=                   33 / CS memory monitor #10
ICSMEM11=                   33 / CS memory monitor #11
ICSMEM12=                   33 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                   33 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1337 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  669 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36803 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32490301 / Exposure Start Time: MIE coarse
MIFTIMES=            103968343 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32490301 / Exposure Complete: MIE coarse
MIFTIMEC=            103968343 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    4 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32490301 / Readout Start: MIE coarse
MIFREADS=            103968343 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32490525 / Readout Complete: MIE coarse
MIFREADC=            103969061 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1338 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  669 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  196 / Observation number
IHDRCNT =                  100 / Number of headers currently in EDAC RAM
IIMGCNT =                  100 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42524704 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2100 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    3 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40234 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -83.2188 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.63597 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.59941 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   19 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   19 / CS memory monitor #5
ICSMEM06=                   19 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   19 / CS memory monitor #9
ICSMEM10=                   19 / CS memory monitor #10
ICSMEM11=                   19 / CS memory monitor #11
ICSMEM12=                   19 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                   19 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1339 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  670 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36802 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32490076 / Exposure Start Time: MIE coarse
MIFTIMES=            103967625 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32490077 / Exposure Complete: MIE coarse
MIFTIMEC=            103967625 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    3 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32490077 / Readout Start: MIE coarse
MIFREADS=            103967625 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32490301 / Readout Complete: MIE coarse
MIFREADC=            103968343 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1340 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  670 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  195 / Observation number
IHDRCNT =                   99 / Number of headers currently in EDAC RAM
IIMGCNT =                   99 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42486616 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2079 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    2 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40235 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.61651 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.63832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    4 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    4 / CS memory monitor #5
ICSMEM06=                    4 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    4 / CS memory monitor #9
ICSMEM10=                    4 / CS memory monitor #10
ICSMEM11=                    4 / CS memory monitor #11
ICSMEM12=                    4 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                    4 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1341 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  671 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36801 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.020480 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32490073 / Exposure Start Time: MIE coarse
MIFTIMES=            103967614 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32490073 / Exposure Complete: MIE coarse
MIFTIMEC=            103967614 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    2 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32490073 / Readout Start: MIE coarse
MIFREADS=            103967614 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32490076 / Readout Complete: MIE coarse
MIFREADC=            103967625 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 0.11 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1342 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  671 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  194 / Observation number
IHDRCNT =                   98 / Number of headers currently in EDAC RAM
IIMGCNT =                   98 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42448528 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2058 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    1 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                40191 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.61651 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.63832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                    4 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                    4 / CS memory monitor #5
ICSMEM06=                    4 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                    4 / CS memory monitor #9
ICSMEM10=                    4 / CS memory monitor #10
ICSMEM11=                    4 / CS memory monitor #11
ICSMEM12=                    4 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   64 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29507 / Major frame count
IMINFCNT=                    4 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1343 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  672 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36800 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             0.000000 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32489886 / Exposure Start Time: MIE coarse
MIFTIMES=            103967017 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32489887 / Exposure Complete: MIE coarse
MIFTIMEC=            103967017 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                    1 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32489887 / Readout Start: MIE coarse
MIFREADS=            103967017 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32490073 / Readout Complete: MIE coarse
MIFREADC=            103967614 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 5.97 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1344 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  672 / extension version number
ROOTNAME= 'ibh719imq                         ' / rootname of the observation set
EXPNAME = 'ibh719imq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  193 / Observation number
IHDRCNT =                   97 / Number of headers currently in EDAC RAM
IIMGCNT =                   97 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             42410440 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2037 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    0 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsDone '           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                    0 / IR multiaccum readout counter
IROBSCTR=                 3305 / IR multiaccum observations since CS Operate
IRMONPIX=                    0 / Ir MONitor PIXel
IRFIFPRC=                    0 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.65624 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.83785 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7012 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.4941 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.8392 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.6659 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.5631 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.5631 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -4.03922 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.494408 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.4941 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.6659 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.5631 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.5631 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.69382 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -3.80392 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              3.57143 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -33.3333 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=             -34.1667 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =             -39.1667 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=             -34.1667 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.9157 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.59001 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.65057 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.62859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  112 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  112 / CS memory monitor #5
ICSMEM06=                  112 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  112 / CS memory monitor #9
ICSMEM10=                  112 / CS memory monitor #10
ICSMEM11=                  112 / CS memory monitor #11
ICSMEM12=                  112 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   66 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   63 / Number of normal MAR's processed by the FSW
ILASTNRM=                  202 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  189 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29506 / Major frame count
IMINFCNT=                  112 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1345 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  673 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36831 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32496713 / Exposure Start Time: MIE coarse
MIFTIMES=            103988861 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32496713 / Exposure Complete: MIE coarse
MIFTIMEC=            103988862 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   16 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32496713 / Readout Start: MIE coarse
MIFREADS=            103988862 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32496937 / Readout Complete: MIE coarse
MIFREADC=            103989579 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1346 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  673 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  224 / Observation number
IHDRCNT =                  128 / Number of headers currently in EDAC RAM
IIMGCNT =                  128 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             43591168 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2688 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   15 / IR multiaccum readout counter
IROBSCTR=                 3306 / IR multiaccum observations since CS Operate
IRMONPIX=                40276 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPInhib '           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =              0.01221 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68347 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.44137 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.22967 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   69 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   69 / CS memory monitor #5
ICSMEM06=                   69 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   69 / CS memory monitor #9
ICSMEM10=                   69 / CS memory monitor #10
ICSMEM11=                   69 / CS memory monitor #11
ICSMEM12=                   69 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=               15.469 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   68 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   66 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  195 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29510 / Major frame count
IMINFCNT=                   69 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1347 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  674 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36830 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32496488 / Exposure Start Time: MIE coarse
MIFTIMES=            103988143 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32496489 / Exposure Complete: MIE coarse
MIFTIMEC=            103988144 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   15 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32496489 / Readout Start: MIE coarse
MIFREADS=            103988144 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32496713 / Readout Complete: MIE coarse
MIFREADC=            103988861 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1348 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  674 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  223 / Observation number
IHDRCNT =                  127 / Number of headers currently in EDAC RAM
IIMGCNT =                  127 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             43553080 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2667 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   14 / IR multiaccum readout counter
IROBSCTR=                 3306 / IR multiaccum observations since CS Operate
IRMONPIX=                40278 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =              0.01221 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.65624 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.1475 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=              -127.96 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.79695 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.44137 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.24913 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   55 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   55 / CS memory monitor #5
ICSMEM06=                   55 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   55 / CS memory monitor #9
ICSMEM10=                   55 / CS memory monitor #10
ICSMEM11=                   55 / CS memory monitor #11
ICSMEM12=                   55 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              5.07822 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              5.00009 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   68 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   66 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  195 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29510 / Major frame count
IMINFCNT=                   55 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1349 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  675 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36829 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32496264 / Exposure Start Time: MIE coarse
MIFTIMES=            103987425 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32496264 / Exposure Complete: MIE coarse
MIFTIMEC=            103987426 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   14 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32496264 / Readout Start: MIE coarse
MIFREADS=            103987426 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32496488 / Readout Complete: MIE coarse
MIFREADC=            103988143 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.17 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1350 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  675 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  222 / Observation number
IHDRCNT =                  126 / Number of headers currently in EDAC RAM
IIMGCNT =                  126 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             43514992 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2646 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   13 / IR multiaccum readout counter
IROBSCTR=                 3306 / IR multiaccum observations since CS Operate
IRMONPIX=                40276 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.65624 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.65624 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.61717 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7789 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58028 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.43164 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.21994 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   40 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   40 / CS memory monitor #5
ICSMEM06=                   40 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   40 / CS memory monitor #9
ICSMEM10=                   40 / CS memory monitor #10
ICSMEM11=                   40 / CS memory monitor #11
ICSMEM12=                   40 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=              15.3127 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   68 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   66 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  195 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29510 / Major frame count
IMINFCNT=                   40 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Read SES'           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1351 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  676 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36828 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32496040 / Exposure Start Time: MIE coarse
MIFTIMES=            103986707 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32496040 / Exposure Complete: MIE coarse
MIFTIMEC=            103986707 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   13 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32496040 / Readout Start: MIE coarse
MIFREADS=            103986707 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32496264 / Readout Complete: MIE coarse
MIFREADC=            103987425 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1352 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  676 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  221 / Observation number
IHDRCNT =                  125 / Number of headers currently in EDAC RAM
IIMGCNT =                  125 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             43476904 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2625 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   12 / IR multiaccum readout counter
IROBSCTR=                 3306 / IR multiaccum observations since CS Operate
IRMONPIX=                40276 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.23447 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.09369 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.96987 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.732552 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =             -9.92157 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.7963 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7473 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.98029 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.47056 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.26859 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   26 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   26 / CS memory monitor #5
ICSMEM06=                   26 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   26 / CS memory monitor #9
ICSMEM10=                   26 / CS memory monitor #10
ICSMEM11=                   26 / CS memory monitor #11
ICSMEM12=                   26 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=               15.469 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   68 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   66 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  195 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29510 / Major frame count
IMINFCNT=                   26 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1353 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  677 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36827 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32495815 / Exposure Start Time: MIE coarse
MIFTIMES=            103985989 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32495815 / Exposure Complete: MIE coarse
MIFTIMEC=            103985989 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   12 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32495815 / Readout Start: MIE coarse
MIFREADS=            103985989 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32496040 / Readout Complete: MIE coarse
MIFREADC=            103986707 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1354 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  677 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  220 / Observation number
IHDRCNT =                  124 / Number of headers currently in EDAC RAM
IIMGCNT =                  124 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             43438816 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2604 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   11 / IR multiaccum readout counter
IROBSCTR=                 3306 / IR multiaccum observations since CS Operate
IRMONPIX=                40278 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =           0.00732601 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =             0.003663 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =            -0.003663 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  128 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.61717 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.65624 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.46872 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.91844 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=                -83.0 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              3.57143 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =                  -40 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7082 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.3127 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              10.0096 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.57541 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.05671 / IR FPA six-stage TEC voltage
IRCETECV=              5.44624 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.27832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                   12 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                   12 / CS memory monitor #5
ICSMEM06=                   12 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                   12 / CS memory monitor #9
ICSMEM10=                   12 / CS memory monitor #10
ICSMEM11=                   12 / CS memory monitor #11
ICSMEM12=                   12 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.07822 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=             -15.4687 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              5.00009 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=              -15.625 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=              -15.625 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              4.92197 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   68 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   66 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  195 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29510 / Major frame count
IMINFCNT=                   12 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1355 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  678 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36826 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32495591 / Exposure Start Time: MIE coarse
MIFTIMES=            103985271 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32495591 / Exposure Complete: MIE coarse
MIFTIMEC=            103985271 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   11 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32495591 / Readout Start: MIE coarse
MIFREADS=            103985271 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32495815 / Readout Complete: MIE coarse
MIFREADC=            103985989 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA  =                    0 / UVIS Offset A
UVOFFB  =                    0 / UVIS Offset B
UVOFFC  =                    0 / UVIS Offset C
UVOFFD  =                    0 / UVIS Offset D
OVERPHYA=                    0 / Physical Overscan AC Edge
OVERPHYB=                    0 / Physical Overscan BD Edge
OVERVIRA=                    0 / Virtual Column Overscan AC Edge
OVERVIRB=                    0 / Virtual Column Overscan BD Edge
OVERROWS=                    0 / Virtual Row Overscan Per Amp
BINPAR  =                    0 / Parallel Bin Y Size
BINSER  =                    0 / Serial Bin X Size
CCDBIN  = 'NoBin             ' / CCD Binning Ratio
  
              / IR Readout Amps
  
IRGAIN  =                  2.5 / IR Gain
IROFFAB =                  190 / IR Offset AB
IROFFCD =                  190 / IR Offset CD
  
              / UVIS Post-Flash Information
  
FLSHERR = 'NoError           ' / Flash Error Code
FLSHABRT= '--      '           / Flash Aborted
FLSHCUR = 'ZeroCur           ' / Flash Current
FLSHSTAT= 'Success           ' / Flash Status (Success/Fail)
FLSHCDUR=                  0.0 / Flash Commanded Duration
FLSHADUR=                  0.0 / Flash Actual Duration
  
              / UVIS CHARGE INJECTION PARAMETERS
CHINJECT= 'NONE    '           / UVIS Charge Injection Mode
  
              / Take-data Flag Information
  
TDFBEGIN= 'TDF Up  '           / Initial TDF State
TDFATTN = 'respond'            / TDF Monitoring Status
TDFNUM  =                    0 / Number of TDF Interrupts During Exposure
TDFDWNH =                  0.0 / Time of TDF Down: HST time
TDFDWNC =                    0 / Time of TDF Down: MIE coarse
TDFDWNF =                    0 / Time of TDF Down: MIE fine
END

--------------------------------- extension 1356 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    0
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'SNAP1   '           / extension name
EXTVER  =                  678 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / Exposure Information
  
ITDF    = 'Up      '           / Take Data Flag status
ITDFRESP= 'Enabled '           / Take Data Flag Response is enabled or disabled
IDMPSTAT= 'NoDmping'           / Image or memory dump in progress
IIMGDMPD=                  192 / Number of Images Dumped
ISDFFIFO= 'Empty             ' / SDF FIFO status (full, half-full, empty)
IDUMPTO = 'NoTimOut          ' / Dump timeout error flag
IDMPWAIT=                 80.5 / Time allowed to complete dump before timeout
IOBSNUM =                  219 / Observation number
IHDRCNT =                  123 / Number of headers currently in EDAC RAM
IIMGCNT =                  123 / # of images currently stored in CS Buffer memor
IIMGEXTP=             38715904 / Pointer to Image Buffer space of next image
IIMGINSP=             43400728 / Image insert pointer
INULLIMG=                    0 / NULL IMaGe counter
ISDRESTR= 'Invalid '           / Sci Data buffer restore
IDETWDSR=                 4761 / Detector Words Remaining
INUMLINE=                 2583 / # of SDF lines of image data stored in memory
  
              / Exposure Information: UVIS
  
IUPWRSTA= 'On '                / Uvis cs PoWeR STAtus
IUEXPSTA= 'ReadDone'           / Uvis cs EXPosure STAtus
IUEXPTYP= 'Full    '           / Uvis EXPosure TYPe
IUNDBSEL= 'Dark   '            / UVIS Normal/Dark/Bias Select
IUBINRAT= 'NoBin  '            / CCD Binning Ratio
IUBLKPRC=                    0 / Uvis BLcKs to PRoCess
IUHDALLO= 'NotALLO           ' / UVIS header allocated flag
IUFIFPRC=                    4 / Uvis FIFo PRoCessing
IUCMDREJ=                    0 / Uvis CMD REJect cntr
IUVADCS = 'Success '           / UVIS A/D Collection Status
IUVDATA = 'Empty   '           / UVIS DATA fifo empty
IUVEMPT = 'Empty   '           / UVIS addrs fifo EMPTy (aka ready)
IUVFULL = 'Not Full'           / UV addrss fifo FULL
IUVISINT= 'Empty   '           / UVIS hwed data INTrpt
IUINJECT= 'NONE   '            / UVIS Charge Injection Type
  
              / Exposure Information: IR
  
IRPWRSTA= 'On '                / Ir cs PoWeR STAtus
IREXPSTA= 'ObsInPrg'           / Ir cs EXPosure STAtus
IREXPTYP= 'SQ128Sub'           / iR EXPosure TYPe
IRNREADS=                   16 / Total readouts in commanded IR multiaccum
IRREADCT=                   10 / IR multiaccum readout counter
IROBSCTR=                 3306 / IR multiaccum observations since CS Operate
IRMONPIX=                40277 / Ir MONitor PIXel
IRFIFPRC=                    4 / Ir FIFo PRoCessing
IICMDREJ=                    0 / IR Command Reject counter
IIRADCS = 'Success '           / IR A/D Collection Status
IIRTPADS= 'TPColect'           / IR Timing Pattern DEB A/D Inhibit Status
IIRDATA = 'Empty   '           / IR DATA fifo empty
IIREMPT = 'Empty   '           / IR addrs fifo EMPTy (aka ready)
IIRFULL = 'Not Full'           / IR addrss fifo FULL
IIRINT  = 'Empty   '           / IR hwed data INTrpt
  
              / Channel Select Mechanism (CSM) Parameters
  
ICSMSTAT= 'PosValid'           / CSM Status
ICSMINIT= 'Init    '           / CSM Initialization Status
ICSMRLY = 'Closed  '           / CSM Relay Position (open, closed)
ICSMDIR = 'Forward'            / CSM stepper motor direction
ICSMSPD = '48.8    '           / CSM commanded Speed (steps/second)
ICSMHLD =                    7 / CSM commanded Motor HOLD off Count
ICSMAI  =              0.01221 / CSM Motor current A (amps)
ICSMBI  =           0.00732601 / CSM Motor current B (amps)
ICSMRPOS=               1582.0 / CSM Resolver Position
ICSMCHAN= 'IR     '            / CSM Channel as reported by FSW
ICSMCOMM= 'A-B-'               / CSM Motor Commutation
ICSMMOT = 'NotMving'           / CSM Motor Moving status
ICSMOTVL= 'Normal  '           / CSM Overtravel Status
ICSMINRS= 'Enabled '           / CSM resolver inhibit status
ICSMTMP =                  4.1 / CSM Motor Temperature (dgC)
ICSMOHT = 'Normal  '           / CSM Overheat status
ICSMOVR = 'NoOvride'           / CSM Overheat Override
ICSMMSTP=                   52 / CSM Motor Step
  
              / UVIS Corrector
  
ICORINRS= 'Enabled'            / Inhibit Corrector resolver
IUCORSEL= 'Invalid '           / UVIS Corrector motor select CMD
IUFOCSTA= 'UnInit  '           / UVIS Corrector Focus Status
IUFOCINI= 'Not Init'           / UVIS Corrector Focus Initialization Status
IUFOCRLY= 'MEB2'               / UVIS Corrector Focus lvdt/thrmistr ReLaY
IUFOCSPD= '6.10    '           / UVIS Corrector Focus cmded Speed
IUFOCHLD=                    0 / UVIS Corrector Focus cmded Motor HOLD off Count
IUFOCDIR= 'Forward'            / UVIS Corrector Focus Stepper Motor Direction
IUFOCCOM= 'A+B+'               / UVIS Corrector Focus Commutation
IUFOCLVT=                  0.0 / UVIS Corrector Focus LVDT
IUFOCPOS=                 2437 / UVIS Corrector Focus Position
IUFOCTMP=            -0.666667 / UVIS Corrector Focus Motor Temperature (dgC)
IUFOCOHT= 'Normal  '           / UVIS Corrector Focus Overheat status
IUFOCOVR= 'NoOvride'           / UVIS Corrector Focus Overheat Override
  
IUINNSTA= 'UnInit  '           / UVIS Corrector Inner Status
IUINNINI= 'Not Init'           / UVIS Corrector Inner Initialization Status
IUINNSPD= '6.10    '           / UVIS Corrector Inner cmded Speed
IUINNHLD=                    0 / UVIS Corrector Inner cmded Motor HOLD off Count
IUINNDIR= 'Forward'            / UVIS Corrector Inner Stepper Motor Direction
IUINNCOM= 'A+B+'               / UVIS Corrector Inner Commutation
IUINNRES=                  0.0 / UVIS Corrector Inner Resolver
IUINNTMP=                  0.1 / UVIS Corrector Inner Motor Temperature (dgC)
IUINNOHT= 'Normal  '           / UVIS Corrector Inner Overheat status
IUINNOVR= 'NoOvride'           / UVIS Corrector Inner Overheat override
  
IUOUTSTA= 'UnInit  '           / UVIS Corrector Outer Status
IUOUTINI= 'Not Init'           / UVIS Corrector Outer Initialization Status
IUOUTSPD= '6.10    '           / UVIS Corrector Outer cmded Speed
IUOUTHLD=                    0 / UVIS Corrector Outer cmded Motor HOLD off Count
IUOUTDIR= 'Forward'            / UVIS Corrector Outer Stepper Motor Direction
IUOUTCOM= 'A+B+'               / UVIS Corrector Outer Commutation
IUOUTRES=                  0.0 / UVIS Corrector Outer Resolver
IUOUTTMP=            -0.666667 / UVIS Corrector Outer Motor Temperature (dgC)
IUOUTOHT= 'Normal  '           / UVIS Corrector Outer Overheat status
IUOUTOVR= 'NoOvride'           / UVIS Corrector Outer Overheat override
  
              / IR Corrector
  
IRFOCSTA= 'UnInit  '           / IR Corrector Focus Status
IRFOCINI= 'Not Init'           / IR Corrector Focus Initialization Status
IRFOCRLY= 'MEB2'               / IR Corrector Focus lvdt/thrmistr ReLaY
IRFOCSPD= '6.10    '           / IR Corrector Focus cmded Speed
IRFOCHLD=                    0 / IR Corrector Focus cmded Motor HOLD off Count
IRFOCDIR= 'Reverse '           / IR Corrector Focus Stepper Motor Direction
IRFOCCOM= 'A+B+'               / IR Corrector Focus Commutation
IRFOCLVT=                  0.0 / IR Corrector Focus LVDT
IRFOCPOS=                 2306 / IR Corrector Focus Position
IRFOCTMP=                  2.3 / IR Corrector Focus Motor Temperature (dgC)
IRFOCOHT= 'Normal  '           / IR Corrector Focus Overheat status
IRFOCOVR= 'NoOvride'           / IR Corrector Focus Overheat Override
  
IRINNSTA= 'UnInit  '           / IR Corrector Inner Status
IRINNINI= 'Not Init'           / IR Corrector Inner Initialization Status
IRINNSPD= '6.10    '           / IR Corrector Inner cmded Speed
IRINNHLD=                    0 / IR Corrector Inner cmded Motor HOLD off Count
IRINNDIR= 'Reverse '           / IR Corrector Inner Stepper Motor Direction
IRINNCOM= 'A+B+'               / IR Corrector Inner Commutation
IRINNRES=                  0.0 / IR Corrector Inner Resolver
IRINNTMP=                 1.98 / IR Corrector Inner Motor Temperature (dgC)
IRINNOHT= 'Normal  '           / IR Corrector Inner Overheat status
IRINNOVR= 'NoOvride'           / IR Corrector Inner Overheat override
  
IROUTSTA= 'UnInit  '           / IR Corrector Outer Status
IROUTINI= 'Not Init'           / IR Corrector Outer Initialization Status
IROUTSPD= '6.10    '           / IR Corrector Outer cmded Speed
IROUTHLD=                    0 / IR Corrector Outer cmded Motor HOLD off Count
IROUTDIR= 'Reverse '           / IR Corrector Outer Stepper Motor Direction
IROUTCOM= 'A+B+'               / IR Corrector Outer Commutation
IROUTRES=                    0 / IR Corrector Outer Resolver
IROUTTMP=                  2.3 / IR Corrector Outer Motor Temperature (dgC)
IROUTOHT= 'Normal  '           / IR Corrector Outer Overheat status
IROUTOVR= 'NoOvride'           / IR Corrector Outer Overheat override
  
              / IR Filter Select Mechanism (FSM) Parameters
  
IFSMSTAT= 'PosValid'           / FSM Mechanism status
IFSMINIT= 'Init    '           / FSM Initialization Status
IFSMRLY = 'Closed  '           / FSM Relay position (open, closed)
IFSMDIR = 'Forward'            / FSM stepper motor direction
IFSMSPD = '65.1    '           / FSM commanded speed
IFSMHLD =                    7 / FSM cmded Motor HOLD off count
IFSMAI  =           0.00732601 / FSM Motor A current (amps)
IFSMBI  =           0.00732601 / FSM Motor B current (amps)
IFSMRPOS=              10908.0 / FSM Resolver Position
IFSMFILT= 'G141   '            / FSM Filter as reported by FSW
IFSMCOMM= 'A+B-'               / FSM Motor Commutation
IFSMMOT = 'NotMovng'           / FSM Motor Moving status
IFSMINRS= 'Enabled'            / FSM resolver inhibit status
IFSMTMP =             -13.2333 / FSM Motor Temperature (dgC)
IFSMMECT=                -43.0 / FSM Housing Temperature (dgC)
IFSMOHT = 'Normal  '           / FSM Overheat status
IFSMOVR = 'NoOvride'           / FSM Overheat Override
IFSMMSTP=                  360 / FSM Motor Step
  
              / UVIS Shutter Mechanism
  
ISHSTAT = 'PosValid'           / UVIS Shutter mechanism Status
ISHENAB = 'Enable '            / Shutter Motor Enable status
ISHMTRI =           0.00610501 / Shutter Motor Current (amps)
ISHCSOVR= 'CEBCntrl'           / Shutter CS Override
ISHCEBOC= 'Close'              / Shutter CEB command (Close, Open)
ISHCSOC = 'Close'              / Shutter CS control (Close, Open)
ISHLTCH = 'ClosLtch'           / Shutter Latch Used
ISHSWSTA= 'Closed'             / Shutter Software Status
ISHRBPOS=   5.110400000000E+04 / Shutter Readback Position
ISHCMPOS=   5.115200000000E+04 / Shutter Commanded Position
ISHTERR =            -0.218138 / Shutter move error (degrees)
ISHCOMM =                  6.0 / Shutter Motor Commutation
ISHCOMAH= 'Disabled'           / Shutter Motor Commutation A High
ISHCOMBH= 'Enabled '           / Shutter Motor Commutation B High
ISHCOMCH= 'Disabled'           / Shutter Motor Commutation C High
ISHCOMAL= 'Enabled '           / Shutter Motor Commutation A Low
ISHCOMBL= 'Disabled'           / Shutter Motor Commutation B Low
ISHCOMCL= 'Disabled'           / Shutter Motor Commutation C Low
ISHUTTMP=                  1.4 / Shutter Motor Temperature (dgC)
ISHUTOHT= 'Normal  '           / Shutter Overheat status
ISHUTOVR= 'NoOvride'           / Shutter Overheat Override
ISHPLSB = 'MEB#1'              / Shutter PROM LSB (MEB1, MEB2)
ISHAMPCT= 'Disable'            / Shutter Motor Amp Control status
  
              / SOFA Parameters
  
ISOFAI  =          -0.00610501 / SOFA motor current
ISOFASEL= 'Selected'           / Readback of MEB Select
ISFA5VR1= 'Closed '            / Readback of the 5V SOFA relay on string 1
ISFA5VR2= 'Closed '            / Readback of the 5V SOFA relay on string 2
ISFA30V1= 'Closed'             / Readback of the 30V SOFA relay on String 1
ISFA30V2= 'Closed'             / Readback of the 30V SOFA relay on String 2
ISOFATMP=                  1.4 / SOFA mechanism Temperature
ISFEXSPD=                  1.0 / SOFA Extended Speed
  
ISFAST01= 'MoveComp'           / SOFA filter wheel 01 status flags
ISFAIS01= 'Init   '            / SOFA filter wheel 01 initialization status
ISFAHI01= 'InitHome'           / SOFA filter wheel 01 home initialization status
ISFASP01=                 48.8 / SOFA filter wheel 01 speed
ISFAHD01=                   15 / SOFA filter wheel 01 holdoff count
ISFAHS01= 'Home Pos'           / SOFA Filter Wheel 1 Home optical sensor
ISFAOP01= 'CLEAR1 '            / SOFA Filter in the optical path for FW 01
ISFAPO01=                  0.0 / SOFA filter wheel 01 position
ISFAMC01=                 56.0 / SOFA filter wheel 01 Motor commutation
  
ISFAST02= 'MoveComp'           / SOFA filter wheel 02 status flags
ISFAIS02= 'Init   '            / SOFA filter wheel 02 initialization status
ISFAHI02= 'InitHome'           / SOFA filter wheel 02 home initialization status
ISFASP02=                 48.8 / SOFA filter wheel 02 speed
ISFAHD02=                   15 / SOFA filter wheel 02 holdoff count
ISFAHS02= 'Home Pos'           / SOFA Filter Wheel 2 Home optical sensor
ISFAOP02= 'CLEAR2 '            / SOFA Filter in the optical path for FW 02
ISFAPO02=                  0.0 / SOFA filter wheel 02 position
ISFAMC02=                 56.0 / SOFA filter wheel 02 Motor commutation
  
ISFAST03= 'MoveComp'           / SOFA filter wheel 03 status flags
ISFAIS03= 'Init   '            / SOFA filter wheel 03 initialization status
ISFAHI03= 'InitHome'           / SOFA filter wheel 03 home initialization status
ISFASP03=                 48.8 / SOFA filter wheel 03 speed
ISFAHD03=                   15 / SOFA filter wheel 03 holdoff count
ISFAHS03= 'Home Pos'           / SOFA Filter Wheel 3 Home optical sensor
ISFAOP03= 'CLEAR3 '            / SOFA Filter in the optical path for FW 03
ISFAPO03=                  0.0 / SOFA filter wheel 03 position
ISFAMC03=                 56.0 / SOFA filter wheel 03 Motor commutation
  
ISFAST04= 'MoveComp'           / SOFA filter wheel 04 status flags
ISFAIS04= 'Init   '            / SOFA filter wheel 04 initialization status
ISFAHI04= 'InitHome'           / SOFA filter wheel 04 home initialization status
ISFASP04=                 48.8 / SOFA filter wheel 04 speed
ISFAHD04=                   15 / SOFA filter wheel 04 holdoff count
ISFAHS04= 'Home Pos'           / SOFA Filter Wheel 4 Home optical sensor
ISFAOP04= 'CLEAR4 '            / SOFA Filter in the optical path for FW 04
ISFAPO04=                  0.0 / SOFA filter wheel 04 position
ISFAMC04=                 56.0 / SOFA filter wheel 04 Motor commutation
  
ISFAST05= 'MoveComp'           / SOFA filter wheel 05 status flags
ISFAIS05= 'Init   '            / SOFA filter wheel 05 initialization status
ISFAHI05= 'InitHome'           / SOFA filter wheel 05 home initialization status
ISFASP05=                 48.8 / SOFA filter wheel 05 speed
ISFAHD05=                   15 / SOFA filter wheel 05 holdoff count
ISFAHS05= 'Home Pos'           / SOFA Filter Wheel 5 Home optical sensor
ISFAOP05= 'CLEAR5 '            / SOFA Filter in the optical path for FW 05
ISFAPO05=                  0.0 / SOFA filter wheel 05 position
ISFAMC05=                 56.0 / SOFA filter wheel 05 Motor commutation
  
ISFAST06= 'MoveComp'           / SOFA filter wheel 06 status flags
ISFAIS06= 'Init   '            / SOFA filter wheel 06 initialization status
ISFAHI06= 'InitHome'           / SOFA filter wheel 06 home initialization status
ISFASP06=                 48.8 / SOFA filter wheel 06 speed
ISFAHD06=                   15 / SOFA filter wheel 06 holdoff count
ISFAHS06= 'Home Pos'           / SOFA Filter Wheel 6 Home optical sensor
ISFAOP06= 'CLEAR6 '            / SOFA Filter in the optical path for FW 06
ISFAPO06=                  0.0 / SOFA filter wheel 06 position
ISFAMC06=                 56.0 / SOFA filter wheel 06 Motor commutation
  
ISFAST07= 'MoveComp'           / SOFA filter wheel 07 status flags
ISFAIS07= 'Init   '            / SOFA filter wheel 07 initialization status
ISFAHI07= 'InitHome'           / SOFA filter wheel 07 home initialization status
ISFASP07=                 48.8 / SOFA filter wheel 07 speed
ISFAHD07=                   15 / SOFA filter wheel 07 holdoff count
ISFAHS07= 'Home Pos'           / SOFA Filter Wheel 7 Home optical sensor
ISFAOP07= 'CLEAR7 '            / SOFA Filter in the optical path for FW 07
ISFAPO07=                  0.0 / SOFA filter wheel 07 position
ISFAMC07=                 56.0 / SOFA filter wheel 07 Motor commutation
  
ISFAST08= 'MoveComp'           / SOFA filter wheel 08 status flags
ISFAIS08= 'Init   '            / SOFA filter wheel 08 initialization status
ISFAHI08= 'InitHome'           / SOFA filter wheel 08 home initialization status
ISFASP08=                 48.8 / SOFA filter wheel 08 speed
ISFAHD08=                   15 / SOFA filter wheel 08 holdoff count
ISFAHS08= 'Home Pos'           / SOFA Filter Wheel 8 Home optical sensor
ISFAOP08= 'CLEAR8 '            / SOFA Filter in the optical path for FW 08
ISFAPO08=                  0.0 / SOFA filter wheel 08 position
ISFAMC08=                 56.0 / SOFA filter wheel 08 Motor commutation
  
ISFAST09= 'MoveComp'           / SOFA filter wheel 09 status flags
ISFAIS09= 'Init   '            / SOFA filter wheel 09 initialization status
ISFAHI09= 'InitHome'           / SOFA filter wheel 09 home initialization status
ISFASP09=                 48.8 / SOFA filter wheel 09 speed
ISFAHD09=                   15 / SOFA filter wheel 09 holdoff count
ISFAHS09= 'Home Pos'           / SOFA Filter Wheel 9 Home optical sensor
ISFAOP09= 'CLEAR9 '            / SOFA Filter in the optical path for FW 09
ISFAPO09=                  0.0 / SOFA filter wheel 09 position
ISFAMC09=                 56.0 / SOFA filter wheel 09 Motor commutation
  
ISFAST10= 'MoveComp'           / SOFA filter wheel 10 status flags
ISFAIS10= 'Init   '            / SOFA filter wheel 10 initialization status
ISFAHI10= 'InitHome'           / SOFA filter wheel 10 home initialization status
ISFASP10=                 48.8 / SOFA filter wheel 10 speed
ISFAHD10=                   15 / SOFA filter wheel 10 holdoff count
ISFAHS10= 'Not Home'           / SOFA Filter Wheel 10 Home optical sensor
ISFAOP10= 'F475X  '            / SOFA Filter in the optical path for FW 10
ISFAPO10=                287.0 / SOFA filter wheel 10 position
ISFAMC10=                 56.0 / SOFA filter wheel 10 Motor commutation
  
ISFAST11= 'MoveComp'           / SOFA filter wheel 11 status flags
ISFAIS11= 'Init   '            / SOFA filter wheel 11 initialization status
ISFAHI11= 'InitHome'           / SOFA filter wheel 11 home initialization status
ISFASP11=                 48.8 / SOFA filter wheel 11 speed
ISFAHD11=                   15 / SOFA filter wheel 11 holdoff count
ISFAHS11= 'Home Pos'           / SOFA Filter Wheel 11 Home optical sensor
ISFAOP11= 'CLEAR11'            / SOFA Filter in the optical path for FW 11
ISFAPO11=                  0.0 / SOFA filter wheel 11 position
ISFAMC11=                 56.0 / SOFA filter wheel 11 Motor commutation
  
ISFAST12= 'MoveComp'           / SOFA filter wheel 12 status flags
ISFAIS12= 'Init   '            / SOFA filter wheel 12 initialization status
ISFAHI12= 'InitHome'           / SOFA filter wheel 12 home initialization status
ISFASP12=                 48.8 / SOFA filter wheel 12 speed
ISFAHD12=                   15 / SOFA filter wheel 12 holdoff count
ISFAHS12= 'Home Pos'           / SOFA Filter Wheel 12 Home optical sensor
ISFAOP12= 'CLEAR12'            / SOFA Filter in the optical path for FW 12
ISFAPO12=                  0.0 / SOFA filter wheel 12 position
ISFAMC12=                 56.0 / SOFA filter wheel 12 Motor commutation
  
              / Cal Lamps Power Supply
  
ICL5V   =              5.15635 / Cal Lamp +5 V
ICL15V  =              14.5991 / Cal Lamp +15 V
  
              / Deuterium Lamp
  
IDLAMP  = 'Off'                / Deuterium Lamp Status
IDLAMPEN= 'Disable'            / Deuterium Lamp Enable
IDLMPCUR= 'Medium '            / Deuterium Lamp Current selection
IDLAMPI = 'Medium '            / Deuterium Lamp Current Level
ID2LAMPI=              1.41176 / Deuterium Lamp current (amps)
ID2LMPT =                    5 / Deuterium Lamp Housing temperature (dgC)
  
              / Tungsten Lamps
  
ITLMPSEL=                  127 / Tungsten Lamp Relay Position
ITLMP12I=                 13.9 / Tungsten Lamp 12 Current Monitor (amps)
ITLMP34I=                 15.8 / Tungsten Lamp 34 Current Monitor (amps)
ITCALPLT=                    5 / Cal Platform near Tungsten Lamp temp (dgC)
ITLMPT  =                    5 / Tungsten Lamp Housing temperature (dgC)
ITL12EN = 'Disable'            / Tungsten Lamp Bulbs 1 & 2 Enable
ITL34EN = 'Disable'            / Tungsten Lamp Bulbs 3 & 4 Enable
ITLAMP1 = 'Off'                / Tungsten Lamp 1 status
ITLAMP2 = 'Off'                / Tungsten Lamp 2 status
ITLAMP3 = 'Off'                / Tungsten Lamp 3 status
ITLAMP4 = 'Off'                / Tungsten Lamp 4 status
  
              / UVIS Detector
  
IUS1ABLO=             -7.65624 / UVIS Serial clock 1 AB Low
IUS1ABHI=             -1.01557 / UVIS Serial clock 1 AB High
IUS1CDLO=             -7.57811 / UVIS Serial clock 1 CD Low
IUS1CDHI=             -1.01557 / UVIS Serial clock 1 CD High
IUS2ALO =             -7.61717 / UVIS Serial clock 2 A Low
IUS2AHI =             -1.01557 / UVIS Serial clock 2 A High
IUS2BLO =             -7.61717 / UVIS Serial clock 2 B Low
IUS2BHI =             -1.01557 / UVIS Serial clock 2 B High
IUS2CLO =             -7.57811 / UVIS Serial clock 2 C Low
IUS2CHI =             -1.01557 / UVIS Serial clock 2 C High
IUS2DLO =             -7.57811 / UVIS Serial clock 2 D Low
IUS2DHI =             -1.01557 / UVIS Serial clock 2 D High
IUS3ALO =             -7.61717 / UVIS Serial clock 3 A Low
IUS3AHI =             -1.01557 / UVIS Serial clock 3 A High
IUS3BLO =             -7.61717 / UVIS Serial clock 3 B Low
IUS3BHI =             -1.01557 / UVIS Serial clock 3 B High
IUS3CLO =             -7.57811 / UVIS Serial clock 3 C Low
IUS3CHI =             -1.01557 / UVIS Serial clock 3 C High
IUS3DLO =             -7.57811 / UVIS Serial clock 3 D Low
IUS3DHI =             -1.01557 / UVIS Serial clock 3 D High
IUP1ABLO=             -9.68744 / UVIS Parallel clock 1 AB LO
IUP1ABHI=              2.50008 / UVIS Parallel clock 1 AB HI
IUP1CDLO=             -9.60931 / UVIS Parallel clock 1 CD LO
IUP1CDHI=              2.50008 / UVIS Parallel clock 1 CD HI
IUP2ABLO=             -7.49992 / UVIS Parallel clock 2 AB LO
IUP2ABHI=              4.53134 / UVIS Parallel clock 2 AB HI
IUP2CDLO=             -7.49992 / UVIS Parallel clock 2 CD LO
IUP2CDHI=              4.53134 / UVIS Parallel clock 2 CD HI
IUP3ABLO=             -9.68744 / UVIS Parallel clock 3 AB LO
IUP3ABHI=              2.54541 / UVIS Parallel clock 3 AB HI
IUP3CDLO=             -9.60931 / UVIS Parallel clock 3 CD LO
IUP3CDHI=              2.54541 / UVIS Parallel clock 3 CD HI
IUTGABLO=             -9.68744 / UVIS Transfer Gate AB LO
IUTGABHI=              2.50008 / UVIS Transfer Gate AB HI
IUTGCDLO=             -9.60931 / UVIS Transfer Gate CD LO
IUTGCDHI=              2.50008 / UVIS Transfer Gate CD HI
IURGABLO=             -8.57561 / UVIS Reset Gate AB LO
IURGABHI=            -0.996816 / UVIS Reset Gate AB HI
IURGCDLO=             -8.49748 / UVIS Reset Gate CD LO
IURGCDHI=            -0.996816 / UVIS Reset Gate CD HI
IUSWALO =             -7.61717 / UVIS Summing Well A Low
IUSWAHI =             -1.01557 / UVIS Summing Well A High
IUSWBLO =             -7.65624 / UVIS Summing Well B Low
IUSWBHI =             -1.01557 / UVIS Summing Well B High
IUSWCLO =             -7.57811 / UVIS Summing Well C Low
IUSWCHI =             -1.01557 / UVIS Summing Well C High
IUSWDLO =             -7.57811 / UVIS Summing Well D Low
IUSWDHI =             -1.01557 / UVIS Summing Well D High
IUOFDAB =              11.8903 / UVIS OFfset Drain AB
IUOFDCD =              11.8903 / UVIS OFfset Drain CD
IUVDDAB =              23.0973 / UVIS ceb VDD AB amp bias
IUVDDCD =              23.0973 / UVIS ceb VDD CD amp bias
IUOFFSTA=             -1.09369 / UVIS ceb aspc A/D OFFSeT A
IUOFFSTB=             -1.09369 / UVIS ceb aspc A/D OFFSeT B
IUOFFSTC=             -1.09369 / UVIS ceb aspc A/D OFFSeT C
IUOFFSTD=             -1.09369 / UVIS ceb aspc A/D OFFSeT D
IUVODAB =              9.49643 / UVIS ceb Vlt Output Diode AB
IUVODCD =              9.49643 / UVIS ceb Vlt Output Diode CD
IULGATAB=             -5.46872 / UVIS ceb Last GATe AB
IULGATCD=             -5.54685 / UVIS ceb Last GATe CD
  
              / IR Detector
  
IRBDACHI=             -1.97504 / DAC output for VBIAS_Qxx signals
IRDACSPR=            0.0415686 / DAC output for unused SPARE
IRDIGP5 =              4.92381 / +5V input voltage for digital portion of DEB
IRDP15  =              14.7702 / Switched +15V for detector ANALOG to buffer PWA
IRDACREF=               5.0295 / Digital to Analog converter +5V reference
IRADOFST=             -2.45255 / -2.5V offset for pre-ADC filter stage
IRA2DP12=              12.0784 / +12V supply for pre-ADC filter stage and ADCs
IRA2DM12=             -12.0094 / -12V supply for pre-ADC filter stage and ADCs
IRANAP5 =               5.0298 / +5V supply for ADCs
  
IR1SP15 =              14.5631 / Input +15V from active SPB, quads 1,2
IR1SM15 =             -14.9082 / Input -15V from active SPB, quads 1,2
IR1FP14 =              13.7349 / Active power filter output for +14V, quads 1,2
IR1FM14 =              -14.149 / Active power filter output for -14V, quads 1,2
IR1DP15 =              14.6322 / Switched +15V from active SPB, quads 1,2
IR1DDP15=              14.6322 / IR Switched input +15V quads 1,2
IR1CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 1,2
IR1REFP5=              4.98824 / +5V reference for detector ANALOG, quads 1,2
IR1ANBP5=              4.94667 / Analog +5V applied to detector, quads 1,2
IR1DGBP5=              4.98824 / Digital +5V applied to detector, quads 1,2
IR1FB1  =             0.727375 / Fixed bias to detector substrate, quads 1,2
IR1FB2  =              3.39873 / Fixed bias to detector bias generator, quad 1,2
IR1M1   =             -1.01211 / -1V supply for detector bias drivers, quad 1,2
IR12OFST=             -3.68864 / Offset removal for sig proc chain, quads 1,2
IR1BUSY =                -10.0 / ADC busy status flag, quads 1,2
IR1GND  =            0.0392157 / Analog grnd refr for Buffer PWA (quads 1,2)
IR1VB   =             0.489231 / Programmable bias to photodiodes thru MUX (1,2)
  
IR3SP15 =              14.5631 / Input +15V from active SPB, quads 3,4
IR3SM15 =             -14.8392 / Input -15V from active SPB, quads 3,4
IR3FP14 =              13.7349 / Active power filter output for +14V, quads 3,4
IR3FM14 =              -14.149 / Active power filter output for -14V, quads 3,4
IR3DP15 =              14.6322 / Switched +15V from active SPB, quads 3,4
IR3DDP15=              14.6322 / IR Switched input +15V quads 3,4
IR3CLKP5=              4.98824 / +5V reference for detector DIGITAL, quads 3,4
IR3REFP5=              4.98824 / +5V reference for detector ANALOG, quads 3,4
IR3ANBP5=              4.94667 / Analog +5V applied to detector, quads 3,4
IR3DGBP5=              4.98824 / Digital +5V applied to detector, quads 3,4
IR3FB1  =             0.727375 / Fixed bias to detector substrate, quads 3,4
IR3FB2  =              3.39873 / Fixed bias to detector bias generator, quad 3,4
IR3M1   =             -1.01729 / -1V supply for detector bias drivers, quad 3,4
IR34OFST=             -3.68864 / Offset removal for sig proc chain, quads 3,4
IR3BUSY =             -9.92157 / ADC busy status flag, quads 3,4
IR3GND  =            0.0392157 / Analog ground reference for Buffer PWA
IR3VB   =             0.489231 / Programmable bias to photodiodes thru MUX (3,4)
  
              / Temperatures
  
IUVDETMP=             -82.5926 / UVIS Detector temperature
IRFPATMP=             -127.872 / IR FPA temperature
IMEB1ST =                  2.5 / MEB1 Side Wall Temp (outer)
IMEB2ST =                  7.5 / MEB2 Side Wall Temp (outer)
ILVPS1ST=              2.85714 / LVPS1 Side wall temp (opposite mounting side)
ILVPS2ST=              12.8571 / LVPS2 Side wall temp (opposite mounting side)
ICEBET  =                 10.0 / CEB End wall (aft) temp
IDEBET  =                  7.5 / DEB End wall (aft) temp
IFITAT  =                  7.5 / FITting A Temp
IFITBT  =                  5.0 / FITting B Temp
IFITCT  =              6.66667 / FITting C Temp
IOBIRFMT=              4.28571 / Optical Bench near IR Fold Mirror temp
IOBIRM1T=             -4.28571 / Optical Bench near IR M1 mount temp
IOBTOPT =             0.714286 / Optical Bench on top cover centered temp
ICPLATET=              4.28571 / Optical Bench Cold Plate (near POM end) Temp
IENCEBT =                  5.0 / Enclosure Panel Bay 1 adjacent to CEB (+V2)
IENDEBT =              6.66667 / Enclosure Panel Bay 2 adjacent to DEB (-V2)
IENBY1FT=              6.66667 / Enclosure Panel Bay 1 Forward (+V2+V3)
IENBY2FT=              6.66667 / Enclosure Panel Bay 2 Forward (-V2+V3)
IENBOTT =              5.83333 / Enclosure Bottom center (-V1) temp
IENPOMT =                  7.5 / Enclosure Panel fore adjacent to POM temp
IERBOTT =                    0 / Electronics Radiator near middle bottom
IDRIRCST=             -34.1667 / Detctr Radiator on IR side by Condensor Saddle
IDRIRT  =             -39.1667 / Detctr Radiator on IR side away from saddle
IDRTSCST=                -35.0 / Detctr Radiator on UV side near VHCP Saddle
IDRUVT  =                  -40 / Detctr Radiator on UV side away from saddle
IPOMARMT=              12.8571 / Pickoff mirror arm near mirror
ICALBOXT=                  7.7 / Calibration Electronics Box temp
ICALCVRT=                    5 / Calibration Platform Cover (radiator) temp
IM1CONDT=             0.714286 / MEB1 condenser saddle on radiator
IUVEVAPT=             -2.14286 / UVIS detector evaporator saddle
ICPCONDT=                  -35 / Opt Bench cold plate condenser saddle on radiat
IREVAPT =               -51.25 / IR detector baseplate evaporator saddle
IRENEVPT=                  -45 / IR cold enclosure evaporator saddle
IUVCONDT=             -33.3333 / UVIS condenser saddle on radiator
ICSTMP  =              15.8833 / MEB CS board (cpu PWA) temperature
IUCBTIMT=              13.2909 / UVIS CEB Timing PWB temperature
IUASPCT =              18.3971 / UVIS CEB ASPC PWB temperature
IUCLK1T =               19.029 / UVIS CEB Clock Driver 1 PWB temperature
IUCLK2T =               19.029 / UVIS CEB Clock Driver 2 PWB temperature
IR1TMP  =              16.3798 / IR DEB Buffer Board (quads 1,2) sensor U22
IR3TMP  =              17.7278 / IR DEB Buffer Board (quads 3,4) sensor U3
IRSPBTMP=              22.7594 / IR DEB Signal Processing Board sensor U48
  
              / Power
  
IHC15V  =              15.1565 / +15 volts from Thermal Control power convrtr
I10VREF1=              9.99006 / +10 volt MEB SES1 board ADC reference 1
I10VREF2=              9.99982 / +10 volt MEB SES1 board ADC reference 2
I5VOP   =              4.92197 / +5V Operate mode reg
I15VOP  =              15.6252 / +15V Operate mode reg
IM15VOP =             -15.9375 / -15V Operate mode reg
I5VMEC  =              5.00009 / +5V mech dc/dc converter monitor
I15VMEC =              15.9377 / +15V mech dc/dc converter monitor
I30VMEC =              31.8755 / +30V mech dc/dc converter monitor
IUVTECV =              4.58514 / UVIS Detector TEC voltage
ISHTECV =              1.71882 / UVIS Shield two-stage TEC voltage
IR6TECV =              6.06644 / IR FPA six-stage TEC voltage
IRCETECV=              5.46083 / IR Cold Enclosure TEC voltage
IRDBTECV=              5.27832 / IR Detector baseplate TEC voltage
  
              / CS Memory
  
ICSMEM01=                29688 / CS memory monitor #1
ICSMEM02=                 1280 / CS memory monitor #2
ICSMEM03=                  117 / CS memory monitor #3
ICSMEM04=                    1 / CS memory monitor #4
ICSMEM05=                  117 / CS memory monitor #5
ICSMEM06=                  117 / CS memory monitor #6
ICSMEM07=                   37 / CS memory monitor #7
ICSMEM08=                43938 / CS memory monitor #8
ICSMEM09=                  117 / CS memory monitor #9
ICSMEM10=                  117 / CS memory monitor #10
ICSMEM11=                  117 / CS memory monitor #11
ICSMEM12=                  117 / CS memory monitor #12
IBANKNUM=                    0 / Memory monitor BANK NUM
  
              / CEB Status
  
IASP1PWR= 'LVPS2  '            / CEB ASPC 1 Board Power Select Relay
IASP2PWR= 'LVPS2  '            / CEB ASPC 2 Board Power Select Relay
ICLK1PWR= 'LVPS2  '            / CEB Clock 1 Board Power Select Relay
ICLK2PWR= 'LVPS2  '            / CEB Clock 2 Board Power Select Relay
ICEB5V  =              5.00009 / CEB +5V converter
ICEBP15V=               15.469 / CEB +15V converter
ICEBM15V=              -15.625 / CEB -15V converter
ICEB35V =              35.6255 / CEB +35V converter
IUTG1P5 =             0.312565 / CEB Tim Gen1 +5v
IUTG2P5 =              4.92197 / CEB Tim Gen2 +5v
IUCK1P5 =              4.92197 / CEB Clock 1 +5V
IUCK1P15=              15.3127 / CEB Clock 1 +15V
IUCK1M15=             -15.4687 / CEB Clock 1 -15V
IUCK2P5 =              4.92197 / CEB Clock 2 +5V
IUCK2P15=              15.3127 / CEB Clock 2 +15V
IUCK2M15=             -15.4687 / CEB Clock 2 -15V
IUAS1P5 =              4.92197 / CEB ASPC/Bias 1 +5V
IUAS1P15=              14.6877 / CEB ASPC/Bias 1 +15V
IUAS1M15=             -14.8437 / CEB ASPC/Bias 1 -15V
IUAS1P35=               34.063 / CEB ASPC/Bias 1 +35V
IUAS2P5 =              5.00009 / CEB ASPC/Bias 2 +5V
IUAS2P15=              14.6877 / CEB ASPC/Bias 2 +15V
IUAS2M15=             -14.8437 / CEB ASPC/Bias 2 -15V
IUAS2P35=              35.6255 / CEB ASPC/Bias 2 +35V
  
              / DEB Status
  
IR1P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 1,2)
IR1M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 1,2)
IR3P15PW= 'LVPS2  '            / DEB +15V Power Select Relay (quads 3,4)
IR3M15PW= 'LVPS2  '            / DEB -15V Power Select Relay (quads 3,4)
IDEB5V  =              5.00009 / DEB +5V converter
IDEB15V =               14.844 / DEB +15V converter
IDEBM15V=             -15.0767 / DEB -15V converter
  
              / FSW and Command Status
  
IERRCNT =                    0 / Number of errors sent to the NSSC-I by the FSW
IFSWVER =                 1280 / FSW Version number
IELOGIND=                    4 / Index into the internal FSW error log
IELOGMSG=                   25 / Last error parameter processed by FSW
IELOGNUM=                  342 / Last error code processed by FSW
IELOGWRP= 'OK      '           / FSW error log wraparound
ILIMCKEN= 'Limit On'           / Limits checking enabled
INEDCOLL= 'Collect '           / Normal Eng. Data (NED) collection enabled
IBUSWAIT= 'No Wait '           / Bus Wait State is enabled/disabled
IDOGTIME= 'Dog On  '           / Watchdog Timer reset hardware function
ICSPAGE = 'Enabled '           / CS paging is enabled or disabled
ITIMECOD= 'Clear   '           / NSSC-1 has issued a Time Code Update
IBKGDMON= 'Enabled '           / Background processing software function enabled
IIMCMDAC=                  248 / Number of immediate MARs accepted by FSW from R
IIMCMDPC=                  248 / Number of immediate MARs processed by the FSW
ILASTIMM=                   22 / Number of the last immediate MAR processed
ICMDFIFO= 'Empty             ' / RIU command FIFO status (full, half-full, empty
INRCMDAC=                   68 / Number of normal MAR's accepted by FSW from RIU
INRCMDPC=                   66 / Number of normal MAR's processed by the FSW
ILASTNRM=                  591 / Number of the last normal MAR processed
INRMQUE =                    0 / Number of entries in the Normal MAR queue
IWAIT   = 'NoWait  '           / Wait normal MAR is currently being processed
ICMDATAC=                  195 / Number of data values accepted by FSW since ini
IDATQUE =                    0 / Number of entries in the Parameter Data queue
IMACINHB= 'OK                ' / Normal MAR processing suspended flag
ICHKSUM = 'Done'               / FSW checksum calculated
ILSTCKSM=                    0 / Last checksum computed by the FSW
IMAJFCNT=                29509 / Major frame count
IMINFCNT=                  117 / Minor frame count
ILOOPCNT=                    0 / counter to show a function is running
IALGDIAG= 'NoColect '          / Analog Diagnostic currently in progress
IDERDIAG= 'NoColect '          / DERived Diagnostic currently in progress
IDIGDIAG= 'NoColect'           / Digital Diagnostic collection status
ISLFTEST= 'NoTest  '           / Self-test normal MAR processing flag
ITESTRES= 'Passed  '           / Results of the last self test performed
ISESADCS= 'Success '           / SES A/D CoIlection Status
ISESDATA= 'Empty   '           / SES A/D data FIFO is empty
ISESEMPT= 'Empty   '           / SES A/D address FIFO is empty
ISESFULL= 'NotFull'            / SES A/D address FIFO is full
ISESINT = 'Empty   '           / SES hardware interrupt
IMECHSEL= 'None    '           / Selected Mechanism (FW CSM)
IMINTSTA= 'Normal  '           / Mechanism Stepping Interrupt Status (FW, CSM)
INEDSTAT= 'Waiting '           / NED Code Execuition Status
ITCUERR = 'NoError           ' / Time code update error flag
IINPCLK = 'Clock On'           / clock input to the 82380 chip status (on/off)
ITIMGAT0=                    1 / External timer gate 0 enabled/disabled
ITIMGAT1=                    0 / External timer gate 1 enabled/disabled
ITIMGAT2=                    1 / External timer gate 2 enabled/disabled
IBKMSTCK= 'Enabled '           / background monitoring Task area checking flag
IBKMDCRC= 'Enabled '           / background monitoring CRC status flag
END

--------------------------------- extension 1357 ---------------------------------
XTENSION= 'IMAGE   '           / IMAGE extension
BITPIX  =                   16
NAXIS   =                    1
NAXIS1  =                  965
PCOUNT  =                    0 / required keyword; must = 0
GCOUNT  =                    1 / required keyword; must = 1
ORIGIN  = 'HSTIO/CFITSIO March 2010'
DATE    = '2013-10-30' / date this file was written (yyyy-mm-dd)
INHERIT =                    T / inherit the primary header
EXTNAME = 'UDL     '           / extension name
EXTVER  =                  679 / extension version number
ROOTNAME= 'ibh719inq                         ' / rootname of the observation set
EXPNAME = 'ibh719inq'          / 9 character exposure identifier
  
              / General Unpacking Information
  
VERSIONH=                    5 / Flight Software Major Revision
VERSIONL=                    0 / Flight Software Minor Revision
OBSNUM  =                36825 / Flight Observation Number
NUMWORDS=                20009 / Number of Words in this Image
PACKETS =                   21 / Number of SDF lines in this Image
DUMPTYPE= 'Science   '         / Image Type
  
              / Memory Dump Information
  
DUMPSRC = 'invalid           ' / Memory Dump Source
ADDRESS = '                   0' / Memory Dump Starting Address
NDMPWRDS=                    0 / Memory Dump Number of Words
DUMPERR = '-- '                / ED Diagnostic Error Indicator
DUMPMODE= 'analog '            / ED Diagnostic Mode
DUMPSAMP=                    0 / Number of Samples
DUMPPER =                    0 / Sample Period
DUMPRPT =                    0 / Repeat Count
DMPADR01=                    0 / Items to Collect #1
DMPADR02=                    0 / Items to Collect #2
DMPADR03=                    0 / Items to Collect #3
DMPADR04=                    0 / Items to Collect #4
DMPADR05=                    0 / Items to Collect #5
DMPADR06=                    0 / Items to Collect #6
DMPADR07=                    0 / Items to Collect #7
DMPADR08=                    0 / Items to Collect #8
DMPADR09=                    0 / Items to Collect #9
DMPADR10=                    0 / Items to Collect #10
DMPADR11=                    0 / Items to Collect #11
DMPADR12=                    0 / Items to Collect #12
DMPADR13=                    0 / Items to Collect #13
DMPADR14=                    0 / Items to Collect #14
DMPADR15=                    0 / Items to Collect #15
DMPADR16=                    0 / Items to Collect #16
  
              / General Exposure Information
  
HVERSION=                   29 / Science Header Version Number
DETECTOR= 'IR  '               / detector in use: UVIS or IR
INTTIME =             7.089150 / Integration Time
HSTTIMES=           1182934800 / Exposure Start Time: HST time
MIETIMES=             32495366 / Exposure Start Time: MIE coarse
MIFTIMES=            103984553 / Exposure Start Time: MIE fine
HSTTIMEC=           1182934800 / Exposure Complete Time: HST time
MIETIMEC=             32495366 / Exposure Complete: MIE coarse
MIFTIMEC=            103984553 / Exposure Complete: MIE fine
CSMID   = 'IR     '            / Channel Select Mechanism ID
  
              / General Image Information
  
NUMROWS =                  138 / Subarray X Size
NUMCOLS =                  138 / Subarray Y Size
XCORNER =                  448 / Subarray X Corner
YCORNER =                  448 / Subarray Y Corner
CCDSETUP= 'normal'             / Normal/Dark/Bias Select
CCDAMP  = 'ABCD'               / Readout Amp Configuration
IMGSETUP= 'SQ128Sub          ' / Full/Subarray/Generic Exposure Indicator
TIMPATID=                  559 / Readout Timing Pattern ID Number
  
              / Control Section Information
  
NULLIMG = '--                ' / Null Image Flag
SWMODE  = 'operate           ' / FSW Mode Indicator
MEMBANK = 'MEB2 '              / MEB ID
UVSAMPS =                    0 / Number of UVIS Samples from Current Value Table
IRSAMPS =                    0 / Number of IR Samples From Current Value Table
UVENG   = 'Success           ' / UVIS CEB ED Collection Status for Readout
IRENG   = 'Success           ' / IR DEB ED Collection Status for Readout
  
              / IR Exposure Information
  
IRNREAD =                   16 / IR Number of Reads
IRRDCNT =                   10 / IR Read Counter
  
              / Exposure Error Flags
  
MOTORERR= '--                ' / CCD Shutter Motor Disabled at Exp Start
READPATT= '--                ' / Readout Timing Pattern ID Mismatch
READERR = '--                ' / Readout Timeout
FIFOREDY= '--                ' / FIFOs Not Available
SHUTTER = '--                ' / CCD Shutter Not Closed at Exp End
PATTERR = '--                ' / CCD Exposure Timing Pattern ID Mismatch
TIMEOUT = '--                ' / CCD Exposure timeout
  
              / UVIS Filter Wheel Information
  
UVF01POS= 'CLEAR1 '            / UV SOFA FW 1 Position
UVF01STA= 'MovCompl'           / UV SOFA FW 1 Status
UVF02POS= 'CLEAR2 '            / UV SOFA FW 2 Position
UVF02STA= 'MovCompl'           / UV SOFA FW 2 Status
UVF03POS= 'CLEAR3 '            / UV SOFA FW 3 Position
UVF03STA= 'MovCompl'           / UV SOFA FW 3 Status
UVF04POS= 'CLEAR4 '            / UV SOFA FW 4 Position
UVF04STA= 'MovComl '           / UV SOFA FW 4 Status
UVF05POS= 'CLEAR5 '            / UV SOFA FW 5 Position
UVF05STA= 'MovCompl'           / UV SOFA FW 5 Status
UVF06POS= 'CLEAR6 '            / UV SOFA FW 6 Position
UVF06STA= 'MovCompl'           / UV SOFA FW 6 Status
UVF07POS= 'CLEAR7 '            / UV SOFA FW 7 Position
UVF07STA= 'MovCompl'           / UV SOFA FW 7 Status
UVF08POS= 'CLEAR8 '            / UV SOFA FW 8 Position
UVF08STA= 'MovCompl'           / UV SOFA FW 8 Status
UVF09POS= 'CLEAR9 '            / UV SOFA FW 9 Position
UVF09STA= 'MovCompl'           / UV SOFA FW 9 Status
UVF10POS= 'F475X  '            / UV SOFA FW 10 Position
UVF10STA= 'MovCompl'           / UV SOFA FW 10 Status
UVF11POS= 'CLEAR11'            / UV SOFA FW 11 Position
UVF11STA= 'MovCompl'           / UV SOFA FW 11 Status
UVF12POS= 'CLEAR12'            / UV SOFA FW 12 Position
UVF12STA= 'MovCompl'           / UV SOFA FW 12 Status
  
              / IR Filter Wheel Information
  
IRFSMID = 'G141              ' / FSM Filter Number
  
              / Calibration Lamp Information
  
DEUTLAMP= 'off'                / Deuterium Lamp Status
LAMP1   = 'off'                / Tungsten Lamp 1 Status
LAMP2   = 'off'                / Tungsten Lamp 2 Status
LAMP3   = 'off'                / Tungsten Lamp 3 Status
LAMP4   = 'off'                / Tungsten Lamp 4 Status
  
              / Readout Information
  
HSTREADS=           1182934800 / Readout Start Time: HST time
MIEREADS=             32495366 / Readout Start: MIE coarse
MIFREADS=            103984553 / Readout Start: MIE fine
HSTREADC=           1182934800 / Readout Complete: HST time
MIEREADC=             32495591 / Readout Complete: MIE coarse
MIFREADC=            103985271 / Readout Complete: MIE fine
WORDSLFT=                    0 / Number of Words Remaining to be read out
FIFOEMTY= '        '           / Detector Science FIFOs Not Empty
READTIME=                 7.18 / Readout duration (sec)
READTOUT=               108.23 / Readout duration timeout limit (sec)
  
              / UVIS Readout Amps
  
UVGAINA =                  1.0 / UVIS Gain A
UVGAINB =                  1.0 / UVIS Gain B
UVGAINC =                  1.0 / UVIS Gain C
UVGAIND =                  1.0 / UVIS Gain D
UVOFFA